DOWNLOAD Sony SAL135F28 Service Manual ↓ Size: 2.2 MB | Pages: 80 in PDF or view online for FREE

Model
SAL135F28
Pages
80
Size
2.2 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera
File
sal135f28.pdf
Date

Sony SAL135F28 Service Manual ▷ View online

HELP
SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)
HELP23
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-40):
J-6082-614-A
1.
Apply the anti-diffusion agent (A-20) to the instruction portions of the 2nd lens holder as shown in the figure.
2.
Attach the iris fixed tube block to the 2nd lens holder, and apply the adhesive bond (B-40) to the iris fixed tube block screw and
tighten it to the iris fixed tube block through the hole of the 2nd lens holder.
HELP24
Adhesive bond (B-40): J-6082-614-A
Attach the A aperture operating plate to the iris fixed tube block, and apply the adhesive bond (B-40) to the two screws and tighten them
as shown in the figure.
Apply the Anti-Diffusion Agent 
(A-20) (All circumferences)
Apply the Anti-Diffusion Agent 
(A-20) (All circumference)
Iris Fixed Tube Block
2nd Lens Holder
Apply Adhesive Bond 
(B-40)
Iris Fixed Tube Block
A Aperture  Operating Plate
Apply the Adhesive Bond 
(B-40) (Two areas)
HELP
SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)
HELP25
Adhesive bond (B-40): J-6082-614-A
Attach the M aperture lever to the M aperture operating plate, and apply the adhesive bond (B-40) to the two screws and tighten them as
shown in the figure.
HELP26
Grease (G-85): J-6082-626-A
Apply the grease (G-85) to the instruction portion of the M aperture operating plate.
HELP27
Adhesive bond (B-10): J-6082-612-A
1.
Tighten the M aperture operation plate holder as far as that rotation of the M aperture operation plate becomes duller.
2.
Loosen the M aperture opretaion plate holder as far as that the M aperture opretaion plate rotates smoothly.
3.
Apply the adhesive bond (B-10) in the width of 5 mm to the two instruction portions of the M aperture operation plate holder.
Note:
After applying the bond (B-10), confirm that the M aperture operation plate rotates correctly.
M Aperture Operation Plate
M Aperture Lever
Apply the Adhesive Bond 
(B-40) (Two areas)
M Aperture Operation Plate
M Aperture Lever
Apply the Grease (G-85) 
(All circumference)
2nd Lens Holder
M Aperture Operation Plate Holder
Apply the Adhesive Bond (B-10) 
(Two areas)
Ver 1.2  2007.01
HELP
SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)
HELP28
Affix the front decoration plate, aligning its character [T] with the index line.
HELP29
Adhesive bond (B-10): J-6082-612-A
1.
Attach the G1 stopper.
Note:
Please tighten surely universal wrench.
Please do not damage the lens.
2.
Apply the adhesive bond (B-10) more than the half of the circumference of screw portion of front frame.
Note:
Apply the adhesive bond so that it can not be visible from exterior.
G1 Stopper
Front Frame
Apply the Adhesive Bond (B-10) 
(more than the half of the circumference
of screw portion)
Index Line
Front Decoration Plate
Character [T]
G1 Stopper
HELP
SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)
HELP30
Adhesive bond (B-10): J-6082-612-A
1.
Apply the adhesive bond (B-10) in the width of 10 mm to the two instruction portions of the front frame as shown in the figure.
2.
Attach the G2 stopper.
Note:
Apply the adhesive bond so that it can not be visible from exterior.
HELP31
Be sure to replace the lens (G2+G3) and station adjustment washer as a set.
Different combination may cause the flange back adjustment not available.
When replacing the lens (G2+G3) with the service parts, check enclosed insert for its compensation value. Then select the suitable station
adjustment washer according to the Table-1 below.
Note:
Never separate the lens (G2+G3) and insert. The compensation value is not written on the parts.
Compensation value of lens
Compensation value of lens (G2+G3)
Combination of station adjustment washer
+0.05 to +0.03
Curver field adjustment washer C
+0.02 to -0.02
Curver field adjustment washer A x 2
–0.03 to –0.05
Curver field adjustment washer B x 2 and Curver field adjustment washer C
Curver field adjustment washer
Part No.
Description
Thickness (mm)
2-688-957-01
Curver field adjustment washer A
0.192
2-688-958-01
Curver field adjustment washer B
0.105
2-688-959-01
Curver field adjustment washer C
0.255
G2 Stopper
Front Frame
Apply the Adhesive Bond
(B-10) (Two areas)
G2 Stopper
Ver 1.2  2007.01
Page of 80
Display

Click on the first or last page to see other SAL135F28 service manuals if exist.