Sony SAL135F18Z Service Manual ▷ View online
4-40
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
135mm F1.8 ZA)
4. In case of error display in the Focus Hold Button Short (infinity position)
1)
When the error display and the NG display appear to the pop-up window, perform the work with caution so that setting the lens to the
infinity position can be done in more than 5 seconds and no more than 10 seconds.
Fig.4-10-8
Fig.4-10-9
2)
Perform “2. Checking Method”again, repeat the inspection until “OK” appears on the pop-up window.
4-41
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
135mm F1.8 ZA)
4-11. WRITE dSB
Equipment
• Personal Computer
• Finished Inspection JIG (AC 100 V only)
• Lens Adjustment Program (ActuatorChecker)
1. Preparations
1)
Connected to equipment with checking lens. (Refer to Section 4-1-3.)
2)
Start up of “ActuatorChecker”.
3)
Click
[Set up]
, and perform the initial setting. (Refer to Section 4-1-4.)
2. Checking Method
1)
Click the
[Write dSB]
.
Fig.4-11-1
2)
The Serial window appears. Input the lens serial number.
Note:
When
[OK]
is clicked without inputting the serial number, the date executed is displayed on the completion window of each item.
Fig.4-11-2
3)
The “Select dsb” window appears.
4)
Being based on the image point shift amount calculated by “4-5. FOCUS-SHIFT CHECK/ADJUSTMENT (APERTURE)”, select the
button.
Fig.4-11-3
5)
When the Write dSB finishes normally, “OK” appears on the pop-up window.
Fig.4-11-4
4-42
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
135mm F1.8 ZA)
3. In case of error in the Write dSB
1)
When the error display and the NG display appear to the pop-up window, press the ENTER key to return to the initial window.
Fig.4-11-5
Fig.4-11-6
2)
If the “NG” appears again, confirm or perform the following.
• Replaceing the main flexible unit.
• Connected state of equipment (Improper connection of BL error.).
3)
Perform “2. Checking Method”again, repeat the inspection until “OK” appears on the pop-up window.
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
135mm F1.8 ZA)
Revision History
Reverse
Ver.
1.0
1.1
1.2
1.3
1.4
Date
2006.10
2006.11
2007.02
2007.05
2007.12
History
Official Release
Correction-1
(C1)
(C1)
Revised-1
Correction-2
(C2)
(C2)
Supplement-1
(S1 DI07-209)
Contents
—
• Correction of Parts Number
S.M Correction :
Cover
• Addition of Service note
• Addition of Disassembly
• Addition of Repair parts list
• Addition of Adjustments
• Correction of Parts Number
S.M Correction :
Page 4-1
• Addition of Repair Parts
• Change of HELP01
• Change of HELP (
• Change of HELP01
• Change of HELP (
HELP02
)
• Addition of guide [About the MTF mea-
surement] (
Cover, Page 1-2
)
• Correction of Aperture Diameter Check
(
Page 4-13, 4-15
)
• Correction of Formula of Focus-Shift
(
Page 4-26
)
S.M. Rev.
issued
—
Yes
Yes
Yes
Yes
985211015.pdf
Click on the first or last page to see other SAL135F18Z service manuals if exist.