Sony SAL135F18Z Service Manual ▷ View online
4-10
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
135mm F1.8 ZA)
4-1-3. Connection of Finished Inspection JIG and Lens Adjustment Program
(ActuatorChecker.exe)
Note:
Confirm “4-1-2. Lens Adjustment Program (ActuatorChecker)” has been completed before this procedure is executed.
Equipment
• Personal Computer
• Finished Inspection JIG (AC 100 V only)
• Lens Adjustment Program (ActuatorChecker.exe)
1.
Connect equipment and checking lens as shown Fig.4-1-20.
Fig.4-1-20
2.
Turn on the finished inspection JIG.
3.
Turn on the personal computer.
4.
Start up “ActuatorChecker.exe” from an arbitrary folder, conform that start up program normally.
Note:
Turn off the finished inspection jig after use.
Finished Inspection JIG
Lens
4-11
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
135mm F1.8 ZA)
4-1-4. Initial Setting of “ActuatorChecker”
1.
Start up “ActuatorChecker”.
Fig.4-1-21
2.
Depending on the initial startup or setting made at the previous startup, the window differs.When the English window appears, click
the
[Set up]
button.
Note:
When any button is clicked, the Serial window appears. The window to enter the lens serial number appears.
Fig.4-1-22
4-12
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
135mm F1.8 ZA)
3.
Set the following contents in the SETUP window.
• MODEL
Model to be adjustment this time
• Language
English
• State
FINAL
• PROCESS
SERVICE
4.
Confirm that all of the items are set, and click [OK].
Fig.4-1-23
4-1-5. About Inspection Procedure of Lens Adjustment Program (ActuatorChecker)
The inspection method has the method of executing the method of inspecting the corresponding model as everything continues and the
inspection of each item one by one.
Click
[START]
from the start up window when you inspect the corresponding model as everything continues.
The procedure for executing the inspection of each item one by one has been described in this manual.
4-13
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
135mm F1.8 ZA)
4-2.
APERTURE DIAMETER CHECK/ADJUSTMENT
4-2-1. Aperture Diameter Check
Equipment
• Luminance Box
• Camera DSLR-A100
• AE Master Lens
• Compact Flash (CF) Card (For image saving)
• Personal Computer (PC)
(Color Calculator 2 installed)
1. Preparations
Note: Confirm the checking lens by complete. (The adjustment of focus brush is completed.)
1)
Install the CF card to the camera.
2)
Set the equipments, camera and master lens as shown in Fig.4-2-1.
Fig.4-2-1
3)
Shoot the images under the following conditions and save them.
Note: Shoot the center of the luminance surface three times with the master lens and checking lens.
Setting of Luminance box:
Luminance:
EV12
Setting of Lens:
Focus:
Infinity end
Setting of Camera:
ISO:
100
Exposure Mode:
M
shutter Speed:
1/125
Aperture:
F5.6
Focus Mode:
MF
Metering:
Center weighted
Preset white balance: Tungsten
D-R:
OFF
Luminance box
Luminance: EV12
Luminance: EV12
Camera
ISO: 100
Exposure Mode: M
Shutter Speed: 1/125
Aperture: F5.6
Focus Mode: MF
Metering: Center weighted
Preset white balance: Tungsten
D-R: OFF
ISO: 100
Exposure Mode: M
Shutter Speed: 1/125
Aperture: F5.6
Focus Mode: MF
Metering: Center weighted
Preset white balance: Tungsten
D-R: OFF
Master lens or checking lens
Focus: Infinity end
Focus: Infinity end
Shoot the center of the luminance surface
Ver. 1.4 2007.12
The changed portions from
Ver. 1.3 are shown in blue.
Ver. 1.3 are shown in blue.
Click on the first or last page to see other SAL135F18Z service manuals if exist.