Sony SAL135F18Z Service Manual ▷ View online
HELP
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
135mm F1.8 ZA)
HELP06
Grease (G-35):
J-6082-621-A
Adhesive bond (B-40): J-6082-614-A
1.
After completing the flange back adjustment, place the golden FB adjustment washer on the side of mount, and overlay the FB
adjustment washers selected in the adjustment, aligning their cut portions. Then, apply the grease (G-35) to the cut portion of washer
on the top.
2.
After inserting the shaft of coupler in the cut portion of FB adjustment washer, install it to the lens.
Note:
• Place the golden FB adjustment washer on the side of mount.
• Be careful not drop the coupler.
FB Adjustment Washer
Cut Portions
FB Adjustment Washer (Gold)
Apply the grease (G-35)
FB Adjustment Washer
Coupler
FB Adjustment Washer (Gold)
HELP
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
135mm F1.8 ZA)
3.
Align four holes of FB adjustment washers with holes for screws.
4.
While inserting the head of coupler in the holes for coupler installation, install the mount block to the lens. Apply the adhesive bond
(B-40) to the screwed portions of screws. Then, tighten four screws to fix the mount block.
Note:
• Before installing the mount block, confirm that the white coupler receive is inserted in the hole for coupler installation.
• After tightening the screws, confirm that the coupler rotates when the focus ring is rotated.
Mount Block
Coupler
Coupler Receive
Holes for coupler installation
Screws
(Apply the adhesive bond
(B-40))
(Apply the adhesive bond
(B-40))
Screws
(Apply the adhesive bond
(B-40))
(Apply the adhesive bond
(B-40))
HELP
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
135mm F1.8 ZA)
Contact Flexible Guide
Screw
(Apply the adhesive bond (B-10))
(Apply the adhesive bond (B-10))
Screw
(Apply the adhesive bond (B-10))
(Apply the adhesive bond (B-10))
HELP07
Adhesive bond (B-10): J-6082-612-A
1.
Install the contact flexible guide and tighten two screws to fix it.
2.
Apply the adhesive bond (B-10) to the heads of screws.
3.
Install the writing flexible of contact block to the contact board guide with two screws.
4.
Apply the adhesive bond (B-10) to the heads of screws.
Install the writing flexible
Contact Flexible Guide
Screws
(Apply the adhesive bond (B-10))
(Apply the adhesive bond (B-10))
HELP
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
135mm F1.8 ZA)
HELP08
Adhesive bond (B-10): J-6082-612-A
1.
Hook the one end of main spring to the lever of preset ring and the other end to lever of main spring guide.
2.
Fix the main spring guide with two screws.
Note:
When installing the main spring guide, place the main spring in the inner side of cut and elected portion.
3.
Apply the adhesive bond (B-10) to the heads of screws.
4.
Confirm that the preset ring moves smoothly.
Main Spring
Preset Ring
Main Spring Guide
Screws
(Apply the adhesive bond (B-10))
(Apply the adhesive bond (B-10))
Click on the first or last page to see other SAL135F18Z service manuals if exist.