Sony SAL1118 Service Manual ▷ View online
3-4
SAL1118 (4.5-5.6/11-18) (DT 11-18mm F4.5-5.6)
3-2.
SUPPLIED ACCESSORIES
Checking supplied accessories.
Other accessories
2-686-121-01 MANUAL, INSTRUCTION
(JAPANESE, ENGLISH, FRENCH, SPANISH, SIMPLIFIED CHINESE)
2-686-121-11 MANUAL, INSTRUCTION
(GERMAN, DUTCH, SWEDISH, ITALIAN) (AEP)
2-686-121-21 MANUAL, INSTRUCTION (PORTUGUESE, RUSSIAN,
TRADITIONAL CHINESE, KOREAN, ARABIC) (AEP)
Ver 1.5 2009.10
Lens Hood
2-687-330-01
Front Lens Cap
X-2179-386-1
Rear Lens Cap
2-683-615-01
The changed portions from
Ver. 1.4 are shown in blue.
Ver. 1.4 are shown in blue.
4-1
SAL1118 (4.5-5.6/11-18) (DT 11-18mm F4.5-5.6)
Note:
After the service repair, perform the adjustments referring to this section.
4-1.
PREPARATIONS
4-1-1. List of Service Tools and Equipments
• Variable Transformer (Output voltage: AC 100 V) (Note 3)
• Camera DSLR-A100
• Compact Flash (CF) Card (For image saving)
• Screen (Art paper)
• Tape Measure
• Plane Mirror (For SLRs)
• Adhesive bond (B-10): J-6082-612-A
• Color Calculator 2
Note:
Color Calculator 2 is downloadable from the ESI homepage.
Fig. 4-1-1
4. ADJUSTMENTS
Personal computer
(Note 1)
(Note 1)
AE master lens
J-6082-597-A
J-6082-597-A
Flange back gauge
(43.50mm)
J-6082-608-A
(43.50mm)
J-6082-608-A
Flange back tester
J-6082-606-A
J-6082-606-A
A-mount
attachment
J-6082-607-A
attachment
J-6082-607-A
Lens test projector
J-6082-605-A
(Note 3)
J-6082-605-A
(Note 3)
1000 mm Collimator
110V: J-6082-604-A
240V: J-6082-604-B
(Note 2)
110V: J-6082-604-A
240V: J-6082-604-B
(Note 2)
USB cord with
connector
1-833-062-11
connector
1-833-062-11
Luminance box
J-6082-581-A
J-6082-581-A
J-1
J-9
J-7
J-2
J-4
J-6
J-5
J-8
J-12
J-10
J-11
J-3
20
30
40
50
60
70
80
90
0
10
Universal wrench
J-6082-609-A
J-6082-609-A
Chip-A for
universal wrench
J-6082-609-1
universal wrench
J-6082-609-1
Chip-B for
universal wrench
J-6082-609-2
universal wrench
J-6082-609-2
Ver 1.1 2006.12
4-2
SAL1118 (4.5-5.6/11-18) (DT 11-18mm F4.5-5.6)
Note 1:
Personal Computer (PC)
(Color Calculator 2 installed)
OS:
Windows XP
MEMORY:
40 M Byte or more recommended
Hard disk free area: 15 M Byte or more recommended
USB terminal:
Standard equipment
Graphics:
32,000 colors or more recommended VGA monitor
Note 2:
Attach the chart to the 1000 mm collimator as shown in Fig. 4-1-2.
Fig. 4-1-2
Note 3:
Connect the variable transformer (Output voltage:
AC 100 V
) to the lens test projector.
Align the marks
1000 mm collimator
Chart
4-3
SAL1118 (4.5-5.6/11-18) (DT 11-18mm F4.5-5.6)
4-1-2. Lens Adjustment Program
The lens adjustment program is required for the following check/adjustment.
4-5. LENS ROM CHECK
4-6. ZOOM BRUSH POSITION CHECK/ADJUSTMENT AND PATTERN CHECK
4-7. FOCUS BRUSH POSITION AND PATTERN CHECK
Prepare/start the Lens adjustment program with the following steps.
Equipment
• Personal Computer (PC)
• Camera DSLR-A100
• USB Cord With Connector
• Lens Adjustment Program
Note:
Lens Adjustment Program is downloadable from the ESI homepage.
1. Installation of the Lens Adjustment Program
For installation of the lens adjustment program, refer to the link “• Preparing the DSLR-A100 adjustment program” described on the
top cover of the camera DSLR-A100 service manual “9-852-130-51”.
Note:
Store the lens adjustment program “LensAdjustment.exe” and related file “AlphaLensAdjust.txt” in the folder that contains
the DSLR-A100 adjustment program “DSLRadj_cs.exe”.
2. Start the Lens Adjustment Program
1)
Connect the camera and PC with the USB cord with connector.
2)
Set the mode dial of camera to “M”.
3)
Turn the POWER switch of the camera to OFF, then turn the POWER switch to ON while pressing the shutter button halfway down
with pressed the
button of controller keys and MENU buttons.
4)
Check that the remaining number of recordable images on the LCD monitor is “BBBB”.
Note:
When “BBBB” is displayed, the camera activates in the adjustment mode.
5)
Start the lens adjustment program “LensAdjustment.exe”.
Click on the first or last page to see other SAL1118 service manuals if exist.