SAL1118 — Sony Digital Camera Service Manual (repair manual). Page 11

View Sony SAL1118 Service Manual online

2-3
SAL1118 (4.5-5.6/11-18) (DT 11-18mm F4.5-5.6)
2-1-2. FOCUS/ZOOM RING SET, 2ND LENS BARREL ASSY AND 5TH LENS BARREL ASSY
C
C
D
D
HELP16
HELP15
HELP14
HELP14
HELP13
HELP11
EXPLODED VIEW
HELP10
HELP12
HELP09
 Zoom Ring
Focus Brush
Support Barrel Assy
Focus Gear Barrel
Outer Barrel Assy
2nd Lens Barre Assy
5th Lens Barre Assy
Focus Couplig Barrel
Focus and Zoom Ring Assy
FOCUS BRUSH POSITION/PATTERN CHECK
HELP
SAL1118 (4.5-5.6/11-18) (DT 11-18mm F4.5-5.6)
HELP
Note for assembling and grease applying positions are shown.
HELP01
Attach the filter screw frame and 1st lens washer, and then align the indexes of the filter screw frame and outer barrel block. Tighten them
with three screws and three adjustment springs.
Screws
Filter Screw Frame
1st Lens Washer
Outer Barrel Block
Adjustment Spring
Filter Screw Frame
Indexes
Outer Barrel Block
Ver 1.2  2007.03
HELP
SAL1118 (4.5-5.6/11-18) (DT 11-18mm F4.5-5.6)
HELP02
Apply grease (G-85) to the gear and shaft of the gear base plate assy.
Grease (G-85): J-6082-626-A
Gear Base Plate Assy
Apply grease (G-85) (all circumference of gear)
Apply grease (G-85) (all circumference of shaft)
HELP
SAL1118 (4.5-5.6/11-18) (DT 11-18mm F4.5-5.6)
HELP03
Adhesive bond (LOCTITE 460) (Note)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
Grease (G-15): J-6082-619-A
1.
Apply adhesive bond ((LOCTITE 460) to the back side of the mount index mark, and attach it to the rear lens barrel assy.
2.
Apply grease (G-15) to the instruction portion of the rear lens barrel assy.
3.
Pass the flexible board through the hole on the rear lens barrel assy, and fix the rear lens barrel assy with five screws as shown in the
figure.
Apply grease (G-15) (Side edge)
Apply adhesive bond
(LOCTITE 460)
(Back side)
Rear Lens Barrel Assy
Screws
Hole
Flexible Board
Rear Lens Barrel Assy
HELP
SAL1118 (4.5-5.6/11-18) (DT 11-18mm F4.5-5.6)
HELP04
1.
Attach the main pcb assy, and fix it with two screws.
2.
Connect the flexible board to the connector on the main pcb assy.
HELP05
Grease (G-35): J-6082-621-A
Grease (G-85): J-6082-626-A
1.
Apply grease (G-85) to the two instruction portions of the coupler.
2.
Apply grease (G-35) to both sides of the coupler receive.
3.
Pass the coupler to the coupler receive, and fit the shaft of the coupler to the notch of the back adjustment washer(s).
Note:
Be sure to use the gold color one for the back adjustment washer that comes in contact with the coupler.
Flexible Board
Main Pcb Assy
Connector
Apply grease (G-85) (all circumference of gear)
Coupler
Apply grease (G-85) (all circumference of shaft)
Apply grease (G-35) (Both sides)
Coupler Receive
Back Adjustment Washer

Click on the first or last page to see other SAL1118 service manuals if exist.