Sony SAL100M28 Service Manual ▷ View online
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
HELP
HELP33
Grease (G-35):
J-6082-621-A
Anti-diffusion agent (A-20): J-6082-611-A
Apply the grease (G-35) and anti-diffusion agent (A-20) to the instruction part of the fixed barrel.
HELP34
Adhesive bond (B-40): J-6082-614-A
Apply the adhesive bond (B-40) to the focus stopper and tighten it.
All
circumference
circumference
Entirely to the
guide
guide
All
circumference
circumference
All
circumference
circumference
Friction Sheet
Apply the grease (G-35)
Apply the anti-diffusion agent (A-20)
Apply the adhesive bond (B-40)
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
HELP
Apply the adhesive bond (B-10)
(2 points for approx. 10 mm long.)
(2 points for approx. 10 mm long.)
Focus Cam Ring B Holder
Focus Cam Ring B Holder
10 mm
HELP35
Adhesive bond (B-10):
J-6082-612-A
Universal Wrench:
J-6082-609-A
Chip-A For Universal Wrench: J-6082-609-1
Chip-B For Universal Wrench: J-6082-609-2
1.
Fasten the focus cam ring B holder until it stops, then loosen back by 5 mm.
2.
Apply the adhesive bond (B-10) to the instruction part as shown in the figure, it tightens with a universal wrench.
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
HELP
HELP36
Grease (G-35):
J-6082-621-A
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-40):
J-6082-614-A
1.
Apply the grease (G-35) and anti-diffusion agent (A-20) to the instruction part of the focus cam ring B block.
2.
Attach the focus cam ring B block to the 3rd moving barrel, and apply the adhesive bond (B-40) to the three guide pins and tighten
them.
Apply the anti-diffusion agent (A-20)
Apply the grease (G-35)
(Entirely to the guide)
(Entirely to the guide)
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
3rd Moving Barrel
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
HELP
HELP37
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-40):
J-6082-614-A
1.
Apply the anti-diffusion agent (A-20) to the instruction part of the 3rd moving barrel.
2.
Attach the G6 lens block to the 3rd moving barrel, and apply the adhesive bond (B-40) to the aperture connecting pin and tighten it.
3.
Attach the focus cam ring B block to the 3rd moving barrel, and apply the adhesive bond (B-40) to the three guide pins and tighten
them.
Apply the anti-diffusion agent (A-20)
Apply the adhesive bond (B-40)
G6 Lens Block
Apply the
adhesive bond (B-40)
adhesive bond (B-40)
Apply the adhesive bond (B-40)
3rd Moving Barrel
Click on the first or last page to see other SAL100M28 service manuals if exist.