Sony SAL100M28 Service Manual ▷ View online
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
HELP
HELP24
Anti-diffusion agent (A-20): J-6082-611-A
Apply the anti-diffusion agent (A-20) to the instruction part of the outer barrel.
HELP25
Grease (G-35):
J-6082-621-A
Adhesive bond (B-10):
J-6082-612-A
Universal Wrench:
J-6082-609-A
Chip-A For Universal Wrench: J-6082-609-1
Chip-B For Universal Wrench: J-6082-609-2
1.
Apply the grease (G-35) to the instruction part of the focus cam ring holder.
2.
Use the universal wrench, fasten the focus cam ring A holder until it stops, then loosen back by 10 to 15 mm.
Note:
Ensure no rattling.
3.
Apply the adhesive bond (B-10) to the instruction part as shown in the figure.
Apply the anti-diffusion agent
(A-20) (All circumference)
(A-20) (All circumference)
All circumference
All circumference
Circumference of the
Focus Scale Window.
Focus Scale Window.
10 mm
2 points for approx. 10 mm long.
Apply the adhesive bond (B-10)
Apply the grease (G-35) (All circumference)
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
HELP
Apply the grease
(G-35) (Both sides)
(G-35) (Both sides)
Apply the grease (G-35) (Both sides)
HELP26
Grease (G-35): J-6082-621-A
1.
Apply the grease (G-35) to the spacer adjustment washer.
2.
Attach the spacer adjustment washer as shown in the figure.
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
HELP
HELP27
Grease (G-35):
J-6082-621-A
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-40):
J-6082-614-A
1.
Apply the grease (G-35) and anti-diffusion agent (A-20) to the instruction part of the focus cam ring A.
2.
Attach the fixed tube block to the midway move frame block.
3.
Apply the adhesive bond (B-40) to the three guide pins and tighten them.
All circumference
Entirely to the
guide
guide
Apply the grease (G-35)
Apply the
anti-diffusion agent
(A-20) (All circumference)
anti-diffusion agent
(A-20) (All circumference)
Apply the adhesive
bond (B-40)
bond (B-40)
Apply the
adhesive
bond (B-40)
adhesive
bond (B-40)
Midway Move Frame Block
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
HELP
HELP28
Adhesive bond (B-40): J-6082-614-A
1.
Attach the fixed tube block to the midway move frame block.
2.
Apply the adhesive bond (B-40) to the three linear guide pins and tighten them.
HELP29
Adhesive bond (B-10): J-6082-612-A
Adhesive bond (B-40): J-6082-614-A
Attach the gear cover, and apply the adhesive bond (B-10, B-40) to the two screws as shown in the figure.
HELP30
Attach the flexible cover sheet as shown in the figure.
Apply the
adhesive
bond (B-40)
adhesive
bond (B-40)
Apply the
adhesivebond (B-40)
adhesivebond (B-40)
Apply the adhesive bond (B-10)
Apply the
adhesive
bond (B-40)
adhesive
bond (B-40)
Main Flexible Block
Gear Cover
Flexible Cover Sheet
Reference line
Click on the first or last page to see other SAL100M28 service manuals if exist.