Sony NEX-5T / NEX-5TL / NEX-5TY (serv.man2) Service Manual ▷ View online
NEX-5T/5TL/5TY_L2
2-7
2-1-5. IMAGER BLOCK SECTION
ns: not supplied
DISASSEMBLY
1. Remove in numerical order (
1
to
3
) in the left figure.
Screw
3.5
1.7
(Black)
4-287-436-01
4-287-436-01
#238:
M1.7 X 3.5
1
#238 X3
#238
Back View
3
#246 X 1
#246
Back View
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
201
A-1978-119-A
CAB F B-ASSY (SERVICE) (BK) (BLACK)
(including IC4501 (CMOS imager) and IS-104 complete
board) (Note 5, 6)
201
A-1981-125-A CAB F B-ASSY (SERVICE) (SI) (SILVER)
(including IC4501 (CMOS imager) and IS-104 complete
board) (Note 5, 6)
201
A-1981-126-A CAB F B-ASSY (SERVICE) (WH) (WHITE)
(including IC4501 (CMOS imager) and IS-104 complete
board) (Note 5, 6)
202
4-443-003-01
SHEET, LIGHT INTERCEPTION
203
4-281-196-01
SHEET, MASK SHEET ADHESIVE (Note 4)
204
4-277-282-11
MB SHEET (754), MASK (Note 4)
* 205
4-196-544-01
TAPE (AS (210))
206
1-487-619-21
SHUTTER UNIT (H094)
207
A-1868-253-A MB CHARGE UNIT (757)
* 208
Selection Parts IM WASHER (A), ADJUST (Note 2, 3)
* 209
Selection Parts IM WASHER (B), ADJUST (Note 2, 3)
* 210
Selection Parts IM WASHER (C), ADJUST (Note 2, 3)
211
4-438-755-02
SHEET, IM RADIATION
212
4-472-682-01 GRIP
(BLACK)
212
4-472-682-11 GRIP
(SILVER)
212
4-472-682-21 GRIP
(WHITE)
213
4-440-283-01 WINDOW
(IR)
#197
4-185-990-01
MB SCREW, CHARGE UNIT FIXED
#238
4-287-436-01
SCREW (M1.7) (Note 1)
#246
3-208-537-51
0+Z M1.4X2 NEW TORASUTA
#246: M1.4 X 2.5
(Red)
3-208-537-51
(Red)
3-208-537-51
2.5
1.4
Note 1: Refer to “Assembly-1: Screw tightening sequence when
assembling the Heat Sink (IM).”.
Note 1: “Assembly-1: Screw tightening sequence when assembling
the Heat Sink (IM).” を参照してください。
Note 2: Refer to “Assembly-2: IM Adjust Washer (A, B, C) putting
position.”.
Note 2: “Assembly-2: IM Adjust Washer (A, B, C) putting position.”
を参照してください。
Note 3: The type of these parts should be selected when perform-
ing adjustments. Refer to “2-2. SELECTION PARTS” on
page 2-10 .
page 2-10 .
Note 3: これらの部品は調整によって種類を選択する必要があります。
2-10ページの “2-2. SELECTION PARTS” を参照してくださ
い。
い。
Note 4: Refer to “Assembly-4: Method of attachment of MB Mask
sheet (754).”.
Note 4: “Assembly-4: Method of attachment of MB Mask sheet
(754).” を参照してください。
4.5
1.6
(
Silver
)
4-185-990-01
#197: M1.6 X 4.5 (Tapping)
Note 5: Precautions for Replacement of the Cab F B-Assy (Ser-
vice)
As Cab F B-Assy (Service) may be damaged by static elec-
tricity from its structure, handle it carefully like for the MOS
IC.
tricity from its structure, handle it carefully like for the MOS
IC.
In addition, ensure that the receiver is not covered with
dusts nor exposed to strong light.
dusts nor exposed to strong light.
Note 5: キャビ前部組サービス交換時の注意
キャビ前部組サービスは構造上，静電気により破壊される恐
れがあるため，MOS ICと同様に注意して取り扱ってください。
れがあるため，MOS ICと同様に注意して取り扱ってください。
また，受光部にはゴミの付着，および強い光がはいることの
ないように注意してください。
ないように注意してください。
Note 6: When this part has been replaced, the Imager DRA Data
setting is required.
For details, refer to “1-1. PRECAUTION ON REPLACING
THE SY-1025 BOARD” and “1-2. PRECAUTION FOR
REPLACEMENT OF IMAGER.”.
THE SY-1025 BOARD” and “1-2. PRECAUTION FOR
REPLACEMENT OF IMAGER.”.
Note 6: この部品を交換した場合，Imager DRA Dataの設定が必要と
なります。
詳細は “1-1. SY-1025基板交換時の注意”と，“1-2. イメージャ
交換時の注意” を参照してください。
交換時の注意” を参照してください。
(Bosses)
(Bosses)
(Boss)
(Boss)
(Boss)
(Claws)
#238
(Note 1)
(Note 1)
#246
#197
ns
2
Imager Unit Section
(See page 2-8)
208
(Note 2, 3)
1
ns
3
207
211
209
(Note 2, 3)
210
(Note 2, 3)
Cabinet Front Section
(See page 2-9)
(including IC4501 (CMOS imager)
and IS-104 complete board)
(Note 5, 6)
and IS-104 complete board)
(Note 5, 6)
206
204
(Note 4)
203
(Note 4)
202
212
213
205
201
NEX-5T/5TL/5TY_L2
2-8
2-1-6. IMAGER UNIT SECTION
ns: not supplied
Screw
Ref. No.
Part No.
Description
251
4-259-691-01
IM PLATE (755), GLASS RETAINER
252
A-1896-052-A IM IR GLASS ASSY (758) (Note)
#191 4-188-735-01 SCREW
(M1.7)
Note
Note:
(1)
)
Refer to the following when assembling the IM IR Glass
Assy and the Imager.
Assy and the Imager.
Attach the IM IR Glass Assy (758), Space IM Plate (758),
Glass Retainer IM Plate (755), and to the Imager IM Plate (755).
Glass Retainer IM Plate (755), and to the Imager IM Plate (755).
(2) Set the parts assembled in step (1) and the Imager onto
the optical filter block attachment jig (J-6082-737-A) while
aligning them with two pins.
aligning them with two pins.
(3) Secure the Imager with four screws.
Optical filter block attachment jig
J-6082-737-A
Parts assembled
in step (1)
in step (1)
Imager
Pin
Pin
Glass Retainer IM Plate (755)
Imager IM Plate (755)
Space IM Plate (758)
IM IR Glass Assy (758)
Note:
IM IR
ガラスASSYとイメージャを組み立てる際は、
下記を参照してください。
(1) IM
イメージャ台板(755)に、IM IR ガラスASSY (758)、
IM
間隔板(758)、IM ガラス押さえ板 (755) を取り付ける。
(2)
ピン2箇所で位置を合わせて、(1)で取り付けた部品とイメージャ
を、光学フィルタブロック貼り付け治具(J-6082-737-A)にセット
する。
を、光学フィルタブロック貼り付け治具(J-6082-737-A)にセット
する。
(3)
ねじ4本でイメージャを固定する。
光学フィルタブロック貼り付け治具
J-6082-737-A
J-6082-737-A
(1)
で取り付けた部品
イメージャ
ピン
ピン
IM
ガラス押さえ板 (755)
IM IR
ガラスASSY (758)
IM
間隔板 (758)
IM
イメージャ台板 (755)
#191
ns
(Note)
ns
#191
251
252
ns
(All mounted parts and IS-104 complete board are not supplied,
but they are included in CAB F B-Assy (Service))
(All mounted parts and IS-104 complete board are not supplied,
but they are included in CAB F B-Assy (Service))
3.5
1.7
(
Black
)
4-188-735-01
#191:
M1.7 X 3.5 (Tapping)
NEX-5T/5TL/5TY_L2
2-9
2-1-7. CABINET FRONT SECTION
ns: not supplied
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
301
4-188-536-01
CAP, BODY (Note 2)
302
4-283-999-03
MB N PLATE A (754) (Note 3)
303
4-284-623-01
MB N PLATE (B) 755
* 304
4-185-963-01
MB N PLATE SP (Note 4)
305
4-440-281-01 RING,
ORNAMENTAL
306
A-1876-371-B MB CONTACT UNIT (755), N (Note 1)
* 307
4-186-534-01
BUTTON, L LOCK (BLACK)
* 307
4-186-534-11
BUTTON, L LOCK (SILVER)
* 307
4-186-534-31
BUTTON, L LOCK (WHITE)
308
X-2581-299-1 PIN ASSY (410), L LOCK
* 309
4-186-538-01
SPRING, LENS LOCK
* 310
4-186-536-01
HOLDER, L LOCK
311
4-440-280-31
CABINET, FRONT (BLACK)
311
4-440-280-41
CABINET, FRONT (SILVER)
311
4-440-280-51
CABINET, FRONT (WHITE)
312
4-440-282-01
COVER, ORNAMENTAL RING (BLACK)
312
4-440-282-11
COVER, ORNAMENTAL RING (SILVER, WHITE)
313
4-440-313-01 SHEET,
GRIP
ADHESIVE
#76
2-666-551-11 SCREW,
TAPPING,
P2
#198
4-186-545-01
SCREW, 0+Z M1.7 SG (SPIN)
#232
4-287-437-01
SPECIAL (M1.7X2.5 (D4X0.5))
Screw
#76: M1.7 X 4.0 (Tapping)
(Silver)
2-666-551-11
2-666-551-11
4.0
1.7
4.0
1.7
(
Silver
)
4-186-545-01
#198:
M1.7 X 4.0
(Boss)
(Boss)
301
(Note 2)
302
(Note 3)
303
305
307
308
313
309
310
311
312
304
(Note 4)
306
(Note 1)
#198
#232
#76
Note
Note 1:
Hold the N MB Contact Unit at
the center of both sides.
the center of both sides.
Hold here.
Don't touch this part.
Note 1:
N MB Contact Unit
の両側の
中央部を持ってください。
ここを持ってください。
この部分に触れないでください。
Note 2: The Cab F B-Assy (Service) includes a protective BODY
CAP.
This part is supplied only with the Cab F B-Assy (Service).
Note 2: キャビ前部組サービスには保護用のボディキャップが含ま
れます。
この部品はキャビ前部組サービスのみに付属されます。
Note 3: Refer to “Assembly-3: Screw tightening sequence when
assembling the MB N Plate A (754).”.
Note 3: Assembly-3: Screw tightening sequence when assembling
the MB N Plate A (754). を参照してください。
Note 4: Refer to “Assembly-5: Apply grease on the MB N Plate SP.”.
Note 4: Assembly-5: Apply grease on the MB N Plate SP. を参照
してください。
2.5
1.7
#232: M1.7 X 2.5
(Silver)
4-287-437-01
4-287-437-01
NEX-5T/5TL/5TY_L2
2-10E
ACCESSORIES
901
902
903
904
905
906
907
909
910
911
ns
ns: not supplied
908
912
913
914 (Note 1)
915
916 (Note 2)
Ref. No. Part No.
Description
901
1-490-429-21
AC adaptor AC-UB10C/UB10D (US, CND)
901
1-490-429-31
AC adaptor AC-UB10C/UB10D (CH)
901
1-490-429-51
AC adaptor AC-UB10C/UB10D (J)
901
1-490-429-61
AC adaptor AC-UB10C/UB10D (EXCEPT US, CND, CH,
J)
902
1-836-411-21
Power cord (mains lead) (JE)
902
1-837-424-11
Power cord (mains lead) (E: NTSC)
902
1-837-427-11
Power cord (mains lead) (RU, AUS, E: PAL)
902
1-837-428-14
Power cord (mains lead) (KR)
903
1-569-007-31
Conversion (2P) Adaptor (E: NTSC, JE)
904
1-569-008-12
Conversion (2P) Adaptor (AUS, E: PAL)
905
1-846-486-11
Micro USB cable
906
4-458-721-01 Shoulder
strap
907
A-1774-691-A Flash HVL-F7S, Flash case
908
4-186-787-01 Flash
case
909
4-188-536-01
Body cap (NEX-5T)
910
X-2546-071-1 Front lens cap (NEX-5TY)
911
X-2584-679-1 Front lens cap (NEX-5TL/NEX-5TY)
912
4-170-837-01
Rear lens cap (NEX-5TY)
913
4-273-919-01
Lens hood (NEX-5TY)
* 914
4-469-371-01
Instruction Manual (JAPANESE) (Note 1)
* 914
4-469-371-11
Instruction Manual (ENGLISH) (Note 1)
* 914
4-469-371-21
Instruction Manual (FRENCH) (Note 1)
* 914
4-469-371-31
Instruction Manual (SPANISH, PORTUGUESE) (Note 1)
* 914
4-469-371-41
Instruction Manual (ENGLISH, FRENCH, GERMAN,
SPANISH, ITALIAN, PORTUGUESE, DUTCH, POLISH,
SWEDISH, FINNISH, NORWEGIAN, DANISH) (Note 1)
* 914
4-469-371-51
Instruction Manual (TRADITIONAL CHINESE,
SIMPLIFIED CHINESE) (Note 1)
* 914
4-469-371-61
Instruction Manual (RUSSIAN, UKRAINIAN) (Note 1)
* 914
4-469-371-71
Instruction Manual (ARABIC, PERSIAN) (Note 1)
* 914
4-469-371-81
Instruction Manual (KOREAN) (Note 1)
* 914
4-469-371-91
Instruction Manual (SIMPLIFIED CHINESE) (Note 1)
915
4-472-073-01
CD-ROM “Application Software for α camera”
“α Handbook”
* 916
4-472-074-01 α Handbook (JAPANESE) (Note 2)
* 916
4-472-074-11 α Handbook (ENGLISH) (Note 2)
* 916
4-472-074-21 α Handbook (FRENCH) (Note 2)
* 916
4-472-074-31 α Handbook (ITALIAN) (Note 2)
* 916
4-472-074-41 α Handbook (SPANISH) (Note 2)
Ref. No. Part No.
Description
* 916
4-472-074-51 α Handbook (PORTUGUESE) (Note 2)
* 916
4-472-074-61 α Handbook (GERMAN) (Note 2)
* 916
4-472-074-71 α Handbook (DUTCH) (Note 2)
* 916
4-472-074-81 α Handbook (TRADITIONAL CHINESE) (Note 2)
* 916
4-472-074-91 α Handbook (SIMPLIFIED CHINESE) (Note 2)
* 916
4-472-075-11 α Handbook (RUSSIAN) (Note 2)
* 916
4-472-075-21 α Handbook (ARABIC) (Note 2)
* 916
4-472-075-31 α Handbook (PERSIAN) (Note 2)
* 916
4-472-075-41 α Handbook (KOREAN) (Note 2)
* 916
4-472-075-51 α Handbook (POLISH) (Note 2)
* 916
4-472-075-61 α Handbook (CZECH) (Note 2)
* 916
4-472-075-71 α Handbook (HUNGARIAN) (Note 2)
* 916
4-472-075-81 α Handbook (SLOVAK) (Note 2)
* 916
4-472-075-91 α Handbook (SWEDISH) (Note 2)
* 916
4-472-076-11 α Handbook (FINNISH) (Note 2)
* 916
4-472-076-21 α Handbook (NORWEGIAN) (Note 2)
* 916
4-472-076-31 α Handbook (DANISH) (Note 2)
* 916
4-472-076-41 α Handbook (THAI) (Note 2)
* 916
4-472-076-51 α Handbook (UKRAINIAN) (Note 2)
(Note 1)
(Only for destination Japanese model)
日本語，英語，韓国語，中国語のみ部品供給可能です。
日本語，英語，韓国語，中国語のみ部品供給可能です。
(Note 2)
The CD-ROM supplied contains all of language version of the α
Handbook (PDF) for printing.
Handbook (PDF) for printing.
・ The printed handbook is not supplied. If required, please order it
with the part number above.
・ (Only for destination Japanese model)
日本国内については日本語のみが印刷での部品供給可能です。
Ref. No. Part No.
Description
8-328-301-00
Rechargeable battery pack NP-FW50/J (J)
8-328-301-31
Rechargeable battery pack NP-FW50/UC (US, CND)
8-328-301-51
Rechargeable battery pack NP-FW50/CE (EXCEPT J,
US, CND, RU, CH)
8-328-301-55
Rechargeable battery pack NP-FW50/RU (RU)
8-328-301-72
Rechargeable battery pack NP-FW50/CN (CH)
2-2. SELECTION PARTS
Ref. No.208
Select the optimum thickness of washer.
Part No.
Description
* 4-185-995-01 IM WASHER (A), ADJUST (t = 0.05)
* 4-185-995-11 IM WASHER (A), ADJUST (t = 0.1)
* 4-185-995-21 IM WASHER (A), ADJUST (t = 0.15)
* 4-185-995-31 IM WASHER (A), ADJUST (t = 0.2)
* 4-185-995-41 IM WASHER (A), ADJUST (t = 0.25)
* 4-185-995-51 IM WASHER (A), ADJUST (t = 0.3)
* 4-185-995-61 IM WASHER (A), ADJUST (t = 0.35)
* 4-185-995-71 IM WASHER (A), ADJUST (t = 0.4)
* 4-185-995-81 IM WASHER (A), ADJUST (t = 0.45)
* 4-185-995-91 IM WASHER (A), ADJUST (t = 0.495)
* 4-185-995-11 IM WASHER (A), ADJUST (t = 0.1)
* 4-185-995-21 IM WASHER (A), ADJUST (t = 0.15)
* 4-185-995-31 IM WASHER (A), ADJUST (t = 0.2)
* 4-185-995-41 IM WASHER (A), ADJUST (t = 0.25)
* 4-185-995-51 IM WASHER (A), ADJUST (t = 0.3)
* 4-185-995-61 IM WASHER (A), ADJUST (t = 0.35)
* 4-185-995-71 IM WASHER (A), ADJUST (t = 0.4)
* 4-185-995-81 IM WASHER (A), ADJUST (t = 0.45)
* 4-185-995-91 IM WASHER (A), ADJUST (t = 0.495)
Ref. No.209
Select the optimum thickness of washer.
Part No.
Description
* 4-185-998-01 IM WASHER (B), ADJUST (t = 0.05)
* 4-185-998-11 IM WASHER (B), ADJUST (t = 0.1)
* 4-185-998-21 IM WASHER (B), ADJUST (t = 0.15)
* 4-185-998-31 IM WASHER (B), ADJUST (t = 0.2)
* 4-185-998-41 IM WASHER (B), ADJUST (t = 0.25)
* 4-185-998-51 IM WASHER (B), ADJUST (t = 0.3)
* 4-185-998-61 IM WASHER (B), ADJUST (t = 0.35)
* 4-185-998-71 IM WASHER (B), ADJUST (t = 0.4)
* 4-185-998-81 IM WASHER (B), ADJUST (t = 0.45)
* 4-185-998-91 IM WASHER (B), ADJUST (t = 0.495)
* 4-185-998-11 IM WASHER (B), ADJUST (t = 0.1)
* 4-185-998-21 IM WASHER (B), ADJUST (t = 0.15)
* 4-185-998-31 IM WASHER (B), ADJUST (t = 0.2)
* 4-185-998-41 IM WASHER (B), ADJUST (t = 0.25)
* 4-185-998-51 IM WASHER (B), ADJUST (t = 0.3)
* 4-185-998-61 IM WASHER (B), ADJUST (t = 0.35)
* 4-185-998-71 IM WASHER (B), ADJUST (t = 0.4)
* 4-185-998-81 IM WASHER (B), ADJUST (t = 0.45)
* 4-185-998-91 IM WASHER (B), ADJUST (t = 0.495)
Ref. No.210
Select the optimum thickness of washer.
Part No.
Description
* 4-185-999-01 IM WASHER (C), ADJUST (t = 0.05)
* 4-185-999-11 IM WASHER (C), ADJUST (t = 0.1)
* 4-185-999-21 IM WASHER (C), ADJUST (t = 0.15)
* 4-185-999-31 IM WASHER (C), ADJUST (t = 0.2)
* 4-185-999-41 IM WASHER (C), ADJUST (t = 0.25)
* 4-185-999-51 IM WASHER (C), ADJUST (t = 0.3)
* 4-185-999-61 IM WASHER (C), ADJUST (t = 0.35)
* 4-185-999-71 IM WASHER (C), ADJUST (t = 0.4)
* 4-185-999-81 IM WASHER (C), ADJUST (t = 0.45)
* 4-185-999-91 IM WASHER (C), ADJUST (t = 0.495)
* 4-185-999-11 IM WASHER (C), ADJUST (t = 0.1)
* 4-185-999-21 IM WASHER (C), ADJUST (t = 0.15)
* 4-185-999-31 IM WASHER (C), ADJUST (t = 0.2)
* 4-185-999-41 IM WASHER (C), ADJUST (t = 0.25)
* 4-185-999-51 IM WASHER (C), ADJUST (t = 0.3)
* 4-185-999-61 IM WASHER (C), ADJUST (t = 0.35)
* 4-185-999-71 IM WASHER (C), ADJUST (t = 0.4)
* 4-185-999-81 IM WASHER (C), ADJUST (t = 0.45)
* 4-185-999-91 IM WASHER (C), ADJUST (t = 0.495)
Click on the first or last page to see other NEX-5T / NEX-5TL / NEX-5TY (serv.man2) service manuals if exist.