Sony ILCE-5100 / ILCE-5100L / ILCE-5100Y (serv.man2) Service Manual ▷ View online
ILCE-5100/5100L/5100Y_L2
2-8
2-1-5. IMAGER UNIT SECTION
ns: not supplied
Ref. No.
Part No.
Description
Note
201
1-856-482-11
FILTER BLOCK, OPTICAL
202
4-281-915-01 IM
GS
TAPE
203
4-185-993-02
IM SHEET, SPACER
#191 4-188-735-01 SCREW
(M1.7)
Screw
#191: M1.7 X 3.5
(Black)
4-188-735-01
4-188-735-01
3.5
1.7
#191
202
203
202
201
(Note)
ns
ns
ns
ns
(All mounted parts and IS-095 complete
board are not supplied, but they are included
in Service, Mecha Device (1200)
(All mounted parts and IS-095 complete
board are not supplied, but they are included
in Service, Mecha Device (1200)
Note :
J-6082-737-A
Refer to the following statements when replacing the Optical
filter block.
filter block.
Method of Removal
(1) Pour resolvent (alcohol or cleaning agent) between the
(1) Pour resolvent (alcohol or cleaning agent) between the
imager and the IM spacer.
*
*
Wait for that the adhesive power of the IM spacer
weakens.
weakens.
(2) Remove the IM spacer from the imager.
Method of Attachment
*
Confirm the mounting direction of the Optical filter
block referring to "Assembly-8: How to distinguish the side of
Optical Filter Block facing to Imager".
Optical Filter Block facing to Imager".
(2) Set the Optical filter block in its attachment jig
(J-6082-737-A), with the attached adhesive side of IM
(J-6082-737-A), with the attached adhesive side of IM
GS TAPE facing upward.
(3) Press the imager down into the jig as shown below to
attach it to the Optical filter block.
Imager
Peel off the release paper.
Pour resolvent (alcohol or
cleaning agent) between
the imager and the IM spacer.
cleaning agent) between
the imager and the IM spacer.
Optical Filter Block
Peel off the
release paper
release paper
Peel off the
release paper
release paper
Peel off the
release paper
release paper
IM GS Tape
IM GS Tape
IM Spacer
Peel off the
release paper
release paper
(1) Attach the two IM GS tapes and the Optical filter block
by aligning them with the outer shape of the IM
spacer evenly.
by aligning them with the outer shape of the IM
spacer evenly.
Note :
J-6082-737-A
光学フィルタブロックを交換する際は,下記を参照してくだ
さい。
さい。
取り外し方
(1) イメージャとIM間隔板の間に溶剤(アルコールまたはク
リーニング液)を流し込む。
* IM間隔板の粘着力が弱くなるのを待ってください。
(2) イメージャからIM間隔板を取り外す。
(1) イメージャとIM間隔板の間に溶剤(アルコールまたはク
リーニング液)を流し込む。
* IM間隔板の粘着力が弱くなるのを待ってください。
(2) イメージャからIM間隔板を取り外す。
イメージャとIM間隔板の間に溶剤
(アルコールまたはクリーニング液)
を流し込む。
(アルコールまたはクリーニング液)
を流し込む。
組み付け方
(1) IM間隔板に対し,上下左右が均一になるように
IM GS TAPE2枚および光学フィルタブロックを貼り
付ける。
* "Assembly-8: How to distinguish the side of Optical Filter
Block facing to Imager"
(1) IM間隔板に対し,上下左右が均一になるように
IM GS TAPE2枚および光学フィルタブロックを貼り
付ける。
* "Assembly-8: How to distinguish the side of Optical Filter
Block facing to Imager"
を参照し,光学フィルタブロックの
取り付ける向きを確認してください。
剥離紙を剥がす
剥離紙を剥がす
剥離紙を剥がす
IM間隔板
IM GS TAPE
剥離紙を剥がす
IM GS TAPE
(2) IM GS TAPEの粘着面が上になるように,光学フィルタブロッ
ク貼付け治具(J-6082-737-A)にセットする。
(3) イメージャを図のように治具に押え付け,光学フィルタブ
ロックに貼り付ける。
ク貼付け治具(J-6082-737-A)にセットする。
(3) イメージャを図のように治具に押え付け,光学フィルタブ
ロックに貼り付ける。
イメージャ
剥離紙を剥がす
光学フィルタブロック
ILCE-5100/5100L/5100Y_L2
2-9
2-1-6. LCD SECTION
Screw
Ref. No.
Part No.
Description
2.0
1.7
#124: M
1.7 X 2.0
(
Silver
)
2-599-475-01
Note
Screw's
Ref. No. (Parts Color.)
Ref. No. (Parts Color.)
Cabinet's Color
Table 2-1
The screw pointed is different according to the cabinet's color.
For the combination of cabinet's color and screw, please refer to Table 2-1.
Note 1
THE COMBINATION OF CABINET’S
COLOR AND SCREW
COLOR AND SCREW
#140 (Black)
#124 (Silver)
BLACK/BROWN
WHITE
251
4-527-069-01
PLATE (LC PANEL REAR) (773)
* 252
1-471-549-11 MAGNET (ND7.9X2.9X1.2)
253
4-542-498-01
CABINET (LC) (783), INNER
254
1-893-427-11
FP-2268 FLEXIBLE BOARD (Note 2)
255
A-2058-056-A LC-1022 BOARD, COMPLETE
256
X-2590-043-1 HINGE
ASSY
(783)
257
4-527-071-01
COVER (LC HINGE REAR) (773)
258
4-542-505-01
SHADING SHEET LC (783)
Ref. No.
Part No.
Description
259
1-471-514-11
MAGNET (LM-30FH) (Note 3)
260
A-1992-995-A PR-1005 FLEXIBLE BOARD, COMPLETE
261
4-548-733-01
SHEET FP ADHESIVE (783)
LCD901 A-2060-479-A LCD SERVICE BLOCK ASSY (BK) (BLACK)
LCD901 A-2060-480-A LCD SERVICE BLOCK ASSY (WH) (WHITE)
LCD901 A-2060-481-A LCD SERVICE BLOCK ASSY (BR) (BROWN)
LCD901 A-2060-480-A LCD SERVICE BLOCK ASSY (WH) (WHITE)
LCD901 A-2060-481-A LCD SERVICE BLOCK ASSY (BR) (BROWN)
#124
2-599-475-01
SCREW (M1.7) (Note 1)
#140
2-635-562-01
SCREW (M1.7) (Note 1)
#239
4-287-435-11
SCREW (M1.4 EUROPE) TYPE
(Claw)
(Claws)
(Claws)
(Claws)
(Claw)
(Claw)
(Claw)
252
254
253
255
261
256
257
259
258
260
251
(Note 2)
(Note 3)
#124
#140
(Note 1)
#140
(Note 1)
#239
LCD901
#140: M
1.7
X 2.0
(Black
)
2-635-562-01
2.0
1.7
#239: M1.4 X 1.4
1.4
1.4
(Red)
4-287-435-11
4-287-435-11
Note 2: Refer to “Assembly-7: The Method of attachment of FP-
2268 Flexible Board” when you assemble.
Note 2: 組立時は“Assembly-7: The Method of attachment of
FP-2268 Flexible Board”を参照してください。
Note 3:
Install the magnet with
the marking oriented as
shown below.
the marking oriented as
shown below.
Marking
Note 3:
ILCE-5100/5100L/5100Y_L2
2-10E
ACCESSORIES
901
902
903
904
905
906
907
908
909
910
912
913
2-2. SELECTION PARTS
Ref. No. 153
Select the optimum thickness of washer.
Part No.
Description
* 4-185-995-01
IM WASHER (A), ADJUST (t = 0.05)
* 4-185-995-11
IM WASHER (A), ADJUST (t = 0.1)
* 4-185-995-21
IM WASHER (A), ADJUST (t = 0.15)
* 4-185-995-31
IM WASHER (A), ADJUST (t = 0.2)
* 4-185-995-41
IM WASHER (A), ADJUST (t = 0.25)
* 4-185-995-51
IM WASHER (A), ADJUST (t = 0.3)
* 4-185-995-61
IM WASHER (A), ADJUST (t = 0.35)
* 4-185-995-71
IM WASHER (A), ADJUST (t = 0.4)
* 4-185-995-81
IM WASHER (A), ADJUST (t = 0.45)
* 4-185-995-91
IM WASHER (A), ADJUST (t = 0.495)
Ref. No. 154
Select the optimum thickness of washer.
Part No.
Description
* 4-185-998-01
IM WASHER (B), ADJUST (t = 0.05)
* 4-185-998-11
IM WASHER (B), ADJUST (t = 0.1)
* 4-185-998-21
IM WASHER (B), ADJUST (t = 0.15)
* 4-185-998-31
IM WASHER (B), ADJUST (t = 0.2)
* 4-185-998-41
IM WASHER (B), ADJUST (t = 0.25)
* 4-185-998-51
IM WASHER (B), ADJUST (t = 0.3)
* 4-185-998-61
IM WASHER (B), ADJUST (t = 0.35)
* 4-185-998-71
IM WASHER (B), ADJUST (t = 0.4)
* 4-185-998-81
IM WASHER (B), ADJUST (t = 0.45)
* 4-185-998-91
IM WASHER (B), ADJUST (t = 0.495)
Ref. No. 155
Select the optimum thickness of washer.
Part No.
Description
* 4-185-999-01
IM WASHER (C), ADJUST (t = 0.05)
* 4-185-999-11
IM WASHER (C), ADJUST (t = 0.1)
* 4-185-999-21
IM WASHER (C), ADJUST (t = 0.15)
* 4-185-999-31
IM WASHER (C), ADJUST (t = 0.2)
* 4-185-999-41
IM WASHER (C), ADJUST (t = 0.25)
* 4-185-999-51
IM WASHER (C), ADJUST (t = 0.3)
* 4-185-999-61
IM WASHER (C), ADJUST (t = 0.35)
* 4-185-999-71
IM WASHER (C), ADJUST (t = 0.4)
* 4-185-999-81
IM WASHER (C), ADJUST (t = 0.45)
* 4-185-999-91
IM WASHER (C), ADJUST (t = 0.495)
Ref. No. Part No.
Description
8-328-301-00
Rechargeable battery pack NP-FW50/J (J)
8-328-301-31
Rechargeable battery pack NP-FW50/UC (US, CND)
8-328-301-51
Rechargeable battery pack NP-FW50/CE (EXCEPT US, CND, CH, J)
8-328-301-72
Rechargeable battery pack NP-FW50/CN (CH)
Ref. No. Part No.
Description
901
1-490-498-63
AC Adaptor AC-UB10C (IND)
901
1-492-868-11
AC Adaptor AC-UB10C/UB10D (US, CND)
901
1-492-868-21
AC Adaptor AC-UB10C/UB10D (CH)
901
1-492-868-31
AC Adaptor AC-UB10C/UB10D (J)
901
1-492-868-41
AC Adaptor AC-UB10C/UB10D (EXCEPT US, CND,
IND,
CH, J)
902
1-836-411-21
Power cord (mains lead) (JE)
902
1-837-421-13
Power cord (mains lead) (UK)
902
1-837-424-11
Power cord (mains lead) (E: NTSC, TW)
902
1-837-427-13
Power cord (mains lead) (AEP, RU, E: PAL)
902
1-837-428-12
Power cord (mains lead) (KR)
902
1-837-429-11
Power cord (mains lead) (AUS)
902
1-848-142-11
Power cord (mains lead) (IND)
903
1-569-007-31
Conversion (2P) adaptor (E: NTSC, JE)
904
1-569-008-12
Conversion (2P) adaptor (AUS, E: PAL)
905
1-846-615-12
Micro USB cable
906
4-167-334-31 Shoulder
strap
907
4-188-536-01
Body cap (ILCE-5100)
908
X-2546-071-1 Front lens cap (ILCE-5100Y)
909
X-2584-679-2 Front lens cap (ILCE-5100L/5100Y)
910
4-159-701-03
Rear lens cap (ILCE-5100Y)
912
4-273-919-01
Lens hood (ILCE-5100Y)
* 913
4-543-701-01
Instruction Manual (JAPANESE)
* 913
4-543-701-11
Instruction Manual (ENGLISH)
* 913
4-543-701-21
Instruction Manual (FRENCH)
* 913
4-543-701-31
Instruction Manual (SPANISH, PORTUGUESE)
* 913
4-543-701-41
Instruction Manual (ENGLISH, FRENCH, GERMAN,
SPANISH, DUTCH, SWEDISH, ITALIAN,
PORTUGUESE, DANISH, FINNISH, NORWEGIAN,
POLISH, RUSSIAN, UKRAINIAN)
* 913
4-543-701-51
Instruction Manual (TRADITIONAL CHINESE,
SIMPLIFIED CHINESE)
* 913
4-543-701-61
Instruction Manual (ARABIC, PERSIAN)
* 913
4-543-701-71
Instruction Manual (KOREAN)
* 913
4-543-701-81
Instruction Manual (SIMPLIFIED CHINESE)
Ref. No. Part No.
Description
The changed portions from
Ver. 1.2 are shown in blue.
Ver. 1.2 are shown in blue.
Ver. 1.3 2015.07
ILCE-5100/5100L/5100Y_L2
3-1
3. ASSEMBLY
Assembly-1: Installation Method of ST-1019 Flexible Board
Note:
Note:
• When installing the ST-1019 Flexible Board, fold it in cor-
rect direction.
• If the ST-1019 Flexible Board is folded in incorrect direction,
replace it with a new one.
Re-folding the incorrectly folded ST-1019 Flexible Board in
opposite direction may cause disconnection of the Flexible
Board.
Re-folding the incorrectly folded ST-1019 Flexible Board in
opposite direction may cause disconnection of the Flexible
Board.
Claw
Hooks
Claws
Boss
Mountain fold
Mountain fold
Mountain fold
ST-1019 Flexible board
Valley fold
Valley fold
Valley fold
3-1. ASSEMBLY
Assembly-2: Installation Method of RL Service Block Assy
RL Service Block Assy
Rib
Rib
Rib
Boss
Claw
Assembly-3: Screw tightening sequence when assembling the
Radiation Plate (IM)
2
1
3
Radiation Plate
3
Assembly-4: IM Adjust Washer (A, B, C) putting position
MB N Holder Assy
IM Adjust Washer (A)
IM Adjust Washer (B)
IM Adjust Washer (C)
Assembly-5: Screw tightening sequence when assembling the
MB Charge Unit
1
2
3
MB Charge Unit
1
2
Assembly-6: Apply grease on the MB N Plate SP
MB N Plate SP
G G-85
(J-6082-626-A)
(J-6082-626-A)
Click on the first or last page to see other ILCE-5100 / ILCE-5100L / ILCE-5100Y (serv.man2) service manuals if exist.