DOWNLOAD Sony ILCE-5000L / ILCE-5000Y (serv.man2) Service Manual ↓ Size: 4.02 MB | Pages: 18 in PDF or view online for FREE

Model
ILCE-5000L ILCE-5000Y (serv.man2)
Pages
18
Size
4.02 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / LEVEL2
File
ilce-5000l-ilce-5000y-sm2.pdf
Date
PREV: Sony ILCE-5000L / ILCE-5000Y Service Manual

Sony ILCE-5000L / ILCE-5000Y (serv.man2) Service Manual ▷ View online

ILCE-5000L/5000Y_L2
2-7
2-1-4. IMAGER BLOCK SECTION
ns: not supplied
Ref. No. 
Part No. 
Description
Ref. No. 
Part No. 
Description
  151 
A-1954-964-A  SERVICE, MECHA DEVICE (1100) (Note 5)
  152 
4-430-446-01 
SHEET (IS) (720), RADIATION
  153 
Selection Parts  IMWASHER (A), ADJUST (Note 2, 3) 
  154 
Selection Parts  IMWASHER (B), ADJUST (Note 2, 3)
  155 
Selection Parts  IMWASHER (C), ADJUST (Note 2, 3)
  156 
A-1905-698-A  MB CHARGE UNIT(762) (Note 4)
 157 
1-492-255-11 
SHUTTER UNIT (H129)
  158 
A-1932-986-A  MB N HOLDER ASSY (SERVICE 762)
  159 
4-527-888-01 
SHEET (MD (773))
*  160 
4-186-538-01 
SPRING, LENS LOCK 
  161 
X-2586-035-1  MB L LOCK PIN ASSY (762)
  162 
4-456-086-01 
BUTTON, LENS LOCK (BLACK)
  162 
4-456-086-11 
BUTTON, LENS LOCK (SILVER, WHITE, PINK)
*  163 
4-185-963-01 
MB N PLATE SP (Note 7)
  164 
4-284-623-01 
MB N PLATE (B) 755
  165 
4-283-999-03 
MB N PLATE A (754)
  166 
4-188-536-01 
CAP, BODY (Note 6)
 #9 
3-078-890-21  SCREW, 
TAPPING
  #197 
4-185-990-01 
MB SCREW, CHARGE UNIT FIXED
  #230 
4-287-434-01 
TAPPING (1.7 (ECOLOGY))
DISASSEMBLY
1.  Remove in numerical order (
1
 to 
2
) in the left figure.
Screw
#9: M1.7 X 5.0 (Tapping)
(Silver)
3-078-890-21
5.0
1.7
1
  #9 X 3
#9
Back View
2
 #230 X 3
#197: M1.6 X 4.5 (Tapping)
(Silver)
4-185-990-01
4.5
1.6
#230: M1.7 X 4.0 (Tapping)
(Black)
4-287-434-01
4.0
1.7
Note 1:  Refer to “Assembly-3: Screw tightening sequence when 
assembling the Radiation Plate (IM)” when you assemble.
Note 1:  組立時は  Assembly-3: Screw tightening sequence when 
assembling the Radiation Plate (IM) を参照してください。
Note 2:  The IM adjust washers (A, B, C) differ in thickness.
 
Make sure to return the removed IM adjust washers to origi-
nal places.
 
When replacing IM adjust washers, refer to “2-2. SELEC-
TION PARTS” on page 2-10.
 
If the original state cannot be restored due to loss of the 
IM adjust washer, for example, replace the Device Unit 
(Service).
Note 2:  IM調整ワッシャ (A, B, C) は，それぞれ厚さが異なります。
 
取り外したIM調整ワッシャは，必ず元の位置に戻してくださ
い。
 
また，IM調整ワッシャを交換する際は，2-10ページの 2-2. 
SELECTION PARTS を参照してください。
 
IM adjust washerを紛失するなどして元の状態に戻せなく
なった場合は，Device Unit (Service) を交換してください。
Note 3:  Refer to “Assembly-4: IM Adjust Washer (A, B, C) putting 
position” when you assemble.
Note 3:  組立時は  Assembly-4: IM Adjust Washer (A, B, C) putting 
position を参照してください。
Note 4:  Refer to “Assembly-5: Screw tightening sequence when 
assembling the MB Charge Unit” when you assemble.
Note 4:  組立時は  Assembly-5: Screw tightening sequence when 
assembling the MB Charge Unit を参照してください。。
Note 5:  Precautions for Replacement of the Mecha Device
 
As Mecha Device may be damaged by static electricity from 
its structure, handle it carefully like for the MOS IC.
 
In addition, ensure that the receiver is not covered with 
dusts nor exposed to strong light.
Note 5:  Mecha Device 交換時の注意
 
Mecha Device は構造上，静電気により破壊される恐れがあ
るため，MOS ICと同様に注意して取り扱ってください。
 
また，受光部にはゴミの付着，および強い光がはいることの
ないように注意してください。
#230
Back View
Note 6:  The Mecha Device (SERVICE) includes a protective BODY 
CAP.
 
This part is supplied only with the Mecha Device (SER-
VICE).
Note 6:  Mecha Device (SERVICE)には保護用のボディキャップが含
まれます。
 
この部品はサービス用キャビフロント組立のみに付属されま
す。
Note 7:  Refer to “Assembly-6: Apply grease on the MB N Plate SP” 
when you assemble.
Note 7:  組立時は  Assembly-6: Apply grease on the MB N Plate 
SP を参照してください。
Note
152
153
(Note 2, 3)
154
(Note 2, 3)
155
(Note 2, 3)
2
 156
(Note 4)
157
164
165
166
(Note 6) 
158
160
161
162
159
1
ns
(Note 1)
Imager Unit Section
(See page 2-8)
151
(Note 5) 
#9
#64
#230
#9
ns
163
(Note 7) 
ILCE-5000L/5000Y_L2
2-8
2-1-5. IMAGER UNIT SECTION
ns: not supplied
Ref. No. 
Part No. 
Description
  201 
4-281-914-01 
IM SPACER (869)
 202 
4-281-915-01  IM 
GS 
TAPE
  203 
1-856-482-11 
FILTER BLOCK, OPTICAL (Note)
 #191  4-188-735-01  SCREW 
(M1.7)
Screw
Note
Note :
J-6082-737-A
Refer to the following statements when replacing the Optical 
filter block.
Method of Removal
(1) Pour resolvent (alcohol or cleaning agent) between the 
imager and the IM spacer.
*
Wait for that the adhesive power of the IM spacer 
weakens.
(2) Remove the IM spacer from the imager.
Method of Attachment
* 
Confirm the mounting direction of the Optical filter 
  block referring to "3-1. ASSEMBLY".
(2) Set the Optical filter block in its attachment jig
      (J-6082-737-A), with the attached adhesive side of IM
spacer facing upward.
(3) Press the imager down into the jig as shown below to 
attach it to the Optical filter block.
Imager
Peel off the release paper.
Pour resolvent (alcohol or 
cleaning agent) between 
the imager and the IM spacer.
Optical Filter Block
Peel off the 
release paper
Peel off the 
release paper
Peel off the 
release paper
IM GS Tape
IM GS Tape
IM Spacer
Peel off the 
release paper
(1) Attach the two IM GS tapes and the Optical filter block
     by aligning them with the outer shape of the IM 
     spacer evenly.
Note :
J-6082-737-A
光学フィルタブロックを交換する際は，下記を参照してくだ
さい。
取り外し方
(1) イメージャとIM間隔板の間に溶剤（アルコールまたはク
    リーニング液）を流し込む。
    * IM間隔板の粘着力が弱くなるのを待ってください。
(2) イメージャからIM間隔板を取り外す。
イメージャとIM間隔板の間に溶剤
（アルコールまたはクリーニング液）
を流し込む。
組み付け方
(1) IM間隔板に対し，上下左右が均一になるように
    IM GS TAPE2枚および光学フィルタブロックを貼り
    付ける。
    
* "3-1. ASSEMBLY"を参照し,光学フィルタブロックの
   取り付ける向きを確認してください。
剥離紙を剥がす
剥離紙を剥がす
剥離紙を剥がす
IM間隔板
IM GS TAPE
剥離紙を剥がす
IM GS TAPE
(2) IM GS TAPEの粘着面が上になるように，光学フィルタブロッ
    ク貼付け治具（J-6082-737-A）にセットする。
(3) イメージャを図のように治具に押え付け，光学フィルタブ
    ロックに貼り付ける。
イメージャ
剥離紙を剥がす
光学フィルタブロック
#191: M1.7 X 3.5 
(Black)
4-188-735-01
3.5
1.7
201
202
202
203
(Note)
ns
ns
#191
(All mounted parts and IS-1007 complete 
 board are not supplied, but they are included 
 in Service, Mecha Device (1100)
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.1 2014.04
ILCE-5000L/5000Y_L2
2-9
2-1-6. LCD SECTION
Ref. No. 
Part No. 
Description
Ref. No. 
Part No. 
Description
  251 
4-527-069-01 
PLATE (LC PANEL REAR) (773)
 252 
1-471-549-11  MAGNET 
(ND7.9X2.9X1.2)
  253 
4-527-070-01 
CABINET (LC) (773), INNER
  254 
1-887-268-11 
FP-2064 FLEXIBLE BOARD (Note 2)
  255 
A-1992-991-A  LC-1017 BOARD, COMPLETE
 256 
X-2588-995-1  HINGE 
ASSY 
(773)
  257 
4-527-078-01 
SHEET (773), PROTECTION
  258 
4-527-071-01 
COVER (LC HINGE REAR) (773)
  259 
4-527-077-01 
SHADING SHEET LC (773)
 260 
1-471-514-11
 
MAGNET (LM-30FH)
 (Note 3)
  261 
A-1992-995-A  PR-1005 FLEXIBLE BOARD, COMPLETE
  262 
4-489-139-01 
SHEET, DL FPC
  LCD901  A-2037-248-A  SERVICE BLOCK ASSY (BK), LCD (BLACK)
  LCD901  A-2037-249-A  SERVICE BLOCK ASSY (SL), LCD (SILVER)
  LCD901  A-2037-250-A  SERVICE BLOCK ASSY (WH), LCD (WHITE)
  LCD901  A-2037-251-A  SERVICE BLOCK ASSY (PI), LCD (PINK)
  #124 
2-599-475-01 
SCREW (M1.7) (Note 1)
  #140 
2-635-562-01 
SCREW (M1.7) (Note 1)
  #239 
4-287-435-11 
SCREW (M1.4 EUROPE) TYPE
(Claw)
(Claws)
(Claws)
(Claws)
(Claw)
(Claw)
(Claw)
252
254
253
255
256
257
258
260
259
261
262
251
(Note 2)
(Note 3)
#124
#140
(Note 1)
#239
LCD901
Screw
2.0
1.7
#124: M
1.7 X 2.0
(
Silver
)
2-599-475-01
#140: M
1.7
X 2.0
(Black
)
2-635-562-01
2.0
1.7
#239: M1.4 X 1.4
(Red)
4-287-435-11
1.4
1.4
Note
Screw's
Ref. No. (Parts Color.)
Cabinet's Color
Table 2-1
The screw pointed       is different according to the cabinet's color.
For the combination of cabinet's color and screw, please refer to Table 2-1.
Note 1
THE  COMBINATION  OF  CABINET’S
COLOR AND  SCREW
#140 (Black)
#124 (Silver)
BLACK
SILVER/WHITE/PINK
Note 2:  Refer to “Assembly-7: The Method of attachment of FP-
2064 Flexible Board” when you assemble.
Note 2:  組立時は  Assembly-7: The Method of attachment of FP-
2064 Flexible Board を参照してください。
Note 3:
Install the magnet with
the marking oriented as
shown below.
Marking
Note 3:
The changed portions from
Ver. 1.2 are shown in blue.
Ver. 1.3 2015.01
ILCE-5000L/5000Y_L2
2-10E
ACCESSORIES
901
902
903
904
905
906
907
908
909
910
911
912 (Note)
Ref. No.    Part No. 
Description
 901 
1-490-498-22 
AC adaptor AC-UB10C (US, CND)
 901 
1-490-498-32 
AC adaptor AC-UB10C (CH)
 901 
1-490-498-52 
AC adaptor AC-UB10C (J)
 901 
1-490-498-62 
AC adaptor AC-UB10C (EXCEPT US, CND
, IND
, CH, J)
 901 
1-490-498-63 
AC Adaptor AC-UB10C (IND)
 902 
1-836-411-21 
Power cord (mains lead) (JE)
 902 
1-837-421-13 
Power cord (mains lead) (UK, E: PAL)
 902 
1-837-424-11 
Power cord (mains lead) (E: NTSC)
 902 
1-837-427-11 
Power cord (mains lead) (AEP, RU, E: PAL)
 902 
1-837-428-12 
Power cord (mains lead) (KR)
 902 
1-837-429-11 
Power cord (mains lead) (AUS)
 902 
1-848-142-11 
Power cord (mains lead) (IND)
 903 
1-569-007-31 
Conversion (2P) adaptor (E: NTSC, JE)
 904 
1-569-008-12 
Conversion (2P) adaptor (E: PAL)
  905 
1-846-486-11 
Micro USB cable
Ref. No.    Part No. 
Description
 906 
4-167-334-31  Shoulder 
strap
 907 
4-188-536-01  Body 
cap
  908 
X-2584-679-1  Front lens cap
  909 
X-2546-071-1  Front lens cap (5000Y)
  910 
4-159-701-03 
Rear lens cap (5000Y)
  911  
4-273-919-01 
Lens hood (5000Y)
*  912 
4-487-947-11 
Instruction Manual (ENGLISH) (Note)
*  912 
4-487-947-21 
Instruction Manual (FRENCH)(Note)
*  912 
4-487-947-31 
Instruction Manual (SPANISH, PORTUGUESE)(Note)
*  912 
4-487-947-41 
 Instruction Manual (ENGLISH, FRENCH, GERMAN, 
SPANISH, ITALIAN, PORTUGUESE, DUTCH, POLISH, 
SWEDISH, FINNISH, NORWEGIAN, DANISH))(Note)
*  912 
4-487-947-51 
 Instruction Manual (TRADITIONAL CHINESE, 
SIMPLIFIED CHINESE)(Note)
*  912 
4-487-947-61 
Instruction Manual (ARABIC, PERSIAN)(Note)
*  912 
4-487-947-71 
Instruction Manual (KOREAN)(Note)
*  912 
4-487-947-81 
Instruction Manual (SIMPLIFIED CHINESE)(Note)
(Note)
(Only for destination Japanese model)
日本語，英語，韓国語，中国語のみ部品供給可能です。
Ref. No.    Part No. 
Description
  
8-328-301-00 
Rechargeable battery pack NP-FW50/J (J)
  
8-328-301-31 
Rechargeable battery pack NP-FW50/UC (US, CND)
  
8-328-301-51 
 Rechargeable battery pack NP-FW50/CE (EXCEPT US, 
CND, CH, J)
Ref. No.    Part No. 
Description
  
8-328-301-72 
Rechargeable battery pack NP-FW50/CN (CH)
2-2. SELECTION PARTS
Ref. No.153
Select the optimum thickness of washer.
 Part 
No. 
Description
*  4-185-995-01  IM WASHER (A), ADJUST (t = 0.05)
*  4-185-995-11  IM WASHER (A), ADJUST (t = 0.1)
*  4-185-995-21  IM WASHER (A), ADJUST (t = 0.15)
*  4-185-995-31  IM WASHER (A), ADJUST (t = 0.2)
*  4-185-995-41  IM WASHER (A), ADJUST (t = 0.25)
*  4-185-995-51  IM WASHER (A), ADJUST (t = 0.3)
*  4-185-995-61  IM WASHER (A), ADJUST (t = 0.35)
*  4-185-995-71  IM WASHER (A), ADJUST (t = 0.4)
*  4-185-995-81  IM WASHER (A), ADJUST (t = 0.45)
*  4-185-995-91  IM WASHER (A), ADJUST (t = 0.495)
Ref. No.154
Select the optimum thickness of washer.
 Part 
No. 
Description
*  4-185-998-01  IM WASHER (B), ADJUST (t = 0.05)
*  4-185-998-11  IM WASHER (B), ADJUST (t = 0.1)
*  4-185-998-21  IM WASHER (B), ADJUST (t = 0.15)
*  4-185-998-31  IM WASHER (B), ADJUST (t = 0.2)
*  4-185-998-41  IM WASHER (B), ADJUST (t = 0.25)
*  4-185-998-51  IM WASHER (B), ADJUST (t = 0.3)
*  4-185-998-61  IM WASHER (B), ADJUST (t = 0.35)
*  4-185-998-71  IM WASHER (B), ADJUST (t = 0.4)
*  4-185-998-81  IM WASHER (B), ADJUST (t = 0.45)
*  4-185-998-91  IM WASHER (B), ADJUST (t = 0.495)
Ref. No.155
Select the optimum thickness of washer.
 Part 
No. 
Description
*  4-185-999-01  IM WASHER (C), ADJUST (t = 0.05)
*  4-185-999-11  IM WASHER (C), ADJUST (t = 0.1)
*  4-185-999-21  IM WASHER (C), ADJUST (t = 0.15)
*  4-185-999-31  IM WASHER (C), ADJUST (t = 0.2)
*  4-185-999-41  IM WASHER (C), ADJUST (t = 0.25)
*  4-185-999-51  IM WASHER (C), ADJUST (t = 0.3)
*  4-185-999-61  IM WASHER (C), ADJUST (t = 0.35)
*  4-185-999-71  IM WASHER (C), ADJUST (t = 0.4)
*  4-185-999-81  IM WASHER (C), ADJUST (t = 0.45)
*  4-185-999-91  IM WASHER (C), ADJUST (t = 0.495)
The changed portions from
Ver. 1.3 are shown in blue.
Ver. 1.4 2015.07
Page of 18
Display

Click on the first or last page to see other ILCE-5000L / ILCE-5000Y (serv.man2) service manuals if exist.

RANDOM: