DOWNLOAD Sony ILCE-3000K / ILCE-3500J (serv.man2) Service Manual ↓ Size: 6.66 MB | Pages: 16 in PDF or view online for FREE

Model
ILCE-3000K ILCE-3500J (serv.man2)
Pages
16
Size
6.66 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / LEVEL2
File
ilce-3000k-ilce-3500j-sm2.pdf
Date

Sony ILCE-3000K / ILCE-3500J (serv.man2) Service Manual ▷ View online

ILCE-3000K/3500J_L2
3-3E
3-2.  CLEANING PROCEDURE OF OLPF
<Preparation for Remedy>
If you use the new Jig (J-6082-663-A) below, make sure to clean the CCD Cleaning Jig (Tip) below before using, please.
Note: Protection sheet is for preventing the scratch of a surface on the Jig (Tip).
 
The protection sheet may be come off the Jig when you take the Jig from a bag, but it is no problem.
<ATTENTION>
If you cannot remove dirt with remedy above, cleaning by the following jig are used.
Soak a small amount of EE3310 (Liquid cleaner) after wrapping the cleaning cloth (J-6082-636-A) around the cleaning jig (J-6082-635-A).
<Cleaning Procedure for the OLPF>
1.  Clean up the tip of CCD cleaning jig.
2.  Dab the tip of CCD cleaning jig at the OLPF, and pull up straight.
 
* Do not slide from right to left or up and down while dabbing.
3.  Repeat “3” several times to clean up.
4.  According to the service manual, check if there is dirt on the OLPF.
CCD Cleaning Jig (New)
(J-6082-663-A)
CCD Cleaning Jig
CCD Cleaning Jig (Tip)
Protection Sheet
<Cleaning Procedure for Tip of CCD Cleaning Jig>
1.  Put the two cleaning cloths on a tray like below.
 
1
 Souse the one cleaning cloth in ethyl alcohol.
 
2
 Put the other cleaning cloth on a tray as it is dry.
2.  Dab the tip of CCD cleaning jig at the cleaning cloth of 1 5 or 6 times.
 
* Do not slide the tip from right to left or up and down while dabbing.
3.  Dab the tip of CCD cleaning jig at the cleaning cloth of 2 5 or 6 times.
 
* Do not slide from right to left or up and down while dabbing.
4.  Wait until the tip will be dried completely.
1
Souse the cleaning
cloth in ethyl alcohol.
2
The dry cleaning cloth.
 OLPF
Cleaning Jig
(J-6082-635-A)
Cleaning Cloth
(J-6082-636-A)
Cut
EE3310
ILCE-3000K/3500J_L2
3-3E
3-2.  CLEANING PROCEDURE OF OLPF
<Preparation for Remedy>
If you use the new Jig (J-6082-663-A) below, make sure to clean the CCD Cleaning Jig (Tip) below before using, please.
Note: Protection sheet is for preventing the scratch of a surface on the Jig (Tip).
 
The protection sheet may be come off the Jig when you take the Jig from a bag, but it is no problem.
<ATTENTION>
If you cannot remove dirt with remedy above, cleaning by the following jig are used.
Soak a small amount of EE3310 (Liquid cleaner) after wrapping the cleaning cloth (J-6082-636-A) around the cleaning jig (J-6082-635-A).
<Cleaning Procedure for the OLPF>
1.  Clean up the tip of CCD cleaning jig.
2.  Dab the tip of CCD cleaning jig at the OLPF, and pull up straight.
 
* Do not slide from right to left or up and down while dabbing.
3.  Repeat “3” several times to clean up.
4.  According to the service manual, check if there is dirt on the OLPF.
CCD Cleaning Jig (New)
(J-6082-663-A)
CCD Cleaning Jig
CCD Cleaning Jig (Tip)
Protection Sheet
<Cleaning Procedure for Tip of CCD Cleaning Jig>
1.  Put the two cleaning cloths on a tray like below.
 
1
 Souse the one cleaning cloth in ethyl alcohol.
 
2
 Put the other cleaning cloth on a tray as it is dry.
2.  Dab the tip of CCD cleaning jig at the cleaning cloth of 1 5 or 6 times.
 
* Do not slide the tip from right to left or up and down while dabbing.
3.  Dab the tip of CCD cleaning jig at the cleaning cloth of 2 5 or 6 times.
 
* Do not slide from right to left or up and down while dabbing.
4.  Wait until the tip will be dried completely.
1
Souse the cleaning
cloth in ethyl alcohol.
2
The dry cleaning cloth.
 OLPF
Cleaning Jig
(J-6082-635-A)
Cleaning Cloth
(J-6082-636-A)
Cut
EE3310
ILCE-3000K/3500J_L2
3-3E
3-2.  CLEANING PROCEDURE OF OLPF
<Preparation for Remedy>
If you use the new Jig (J-6082-663-A) below, make sure to clean the CCD Cleaning Jig (Tip) below before using, please.
Note: Protection sheet is for preventing the scratch of a surface on the Jig (Tip).
 
The protection sheet may be come off the Jig when you take the Jig from a bag, but it is no problem.
<ATTENTION>
If you cannot remove dirt with remedy above, cleaning by the following jig are used.
Soak a small amount of EE3310 (Liquid cleaner) after wrapping the cleaning cloth (J-6082-636-A) around the cleaning jig (J-6082-635-A).
<Cleaning Procedure for the OLPF>
1.  Clean up the tip of CCD cleaning jig.
2.  Dab the tip of CCD cleaning jig at the OLPF, and pull up straight.
 
* Do not slide from right to left or up and down while dabbing.
3.  Repeat “3” several times to clean up.
4.  According to the service manual, check if there is dirt on the OLPF.
CCD Cleaning Jig (New)
(J-6082-663-A)
CCD Cleaning Jig
CCD Cleaning Jig (Tip)
Protection Sheet
<Cleaning Procedure for Tip of CCD Cleaning Jig>
1.  Put the two cleaning cloths on a tray like below.
 
1
 Souse the one cleaning cloth in ethyl alcohol.
 
2
 Put the other cleaning cloth on a tray as it is dry.
2.  Dab the tip of CCD cleaning jig at the cleaning cloth of 1 5 or 6 times.
 
* Do not slide the tip from right to left or up and down while dabbing.
3.  Dab the tip of CCD cleaning jig at the cleaning cloth of 2 5 or 6 times.
 
* Do not slide from right to left or up and down while dabbing.
4.  Wait until the tip will be dried completely.
1
Souse the cleaning
cloth in ethyl alcohol.
2
The dry cleaning cloth.
 OLPF
Cleaning Jig
(J-6082-635-A)
Cleaning Cloth
(J-6082-636-A)
Cut
EE3310
ILCE-3000K/3500J_L2
3-3E
3-2.  CLEANING PROCEDURE OF OLPF
<Preparation for Remedy>
If you use the new Jig (J-6082-663-A) below, make sure to clean the CCD Cleaning Jig (Tip) below before using, please.
Note: Protection sheet is for preventing the scratch of a surface on the Jig (Tip).
 
The protection sheet may be come off the Jig when you take the Jig from a bag, but it is no problem.
<ATTENTION>
If you cannot remove dirt with remedy above, cleaning by the following jig are used.
Soak a small amount of EE3310 (Liquid cleaner) after wrapping the cleaning cloth (J-6082-636-A) around the cleaning jig (J-6082-635-A).
<Cleaning Procedure for the OLPF>
1.  Clean up the tip of CCD cleaning jig.
2.  Dab the tip of CCD cleaning jig at the OLPF, and pull up straight.
 
* Do not slide from right to left or up and down while dabbing.
3.  Repeat “3” several times to clean up.
4.  According to the service manual, check if there is dirt on the OLPF.
CCD Cleaning Jig (New)
(J-6082-663-A)
CCD Cleaning Jig
CCD Cleaning Jig (Tip)
Protection Sheet
<Cleaning Procedure for Tip of CCD Cleaning Jig>
1.  Put the two cleaning cloths on a tray like below.
 
1
 Souse the one cleaning cloth in ethyl alcohol.
 
2
 Put the other cleaning cloth on a tray as it is dry.
2.  Dab the tip of CCD cleaning jig at the cleaning cloth of 1 5 or 6 times.
 
* Do not slide the tip from right to left or up and down while dabbing.
3.  Dab the tip of CCD cleaning jig at the cleaning cloth of 2 5 or 6 times.
 
* Do not slide from right to left or up and down while dabbing.
4.  Wait until the tip will be dried completely.
1
Souse the cleaning
cloth in ethyl alcohol.
2
The dry cleaning cloth.
 OLPF
Cleaning Jig
(J-6082-635-A)
Cleaning Cloth
(J-6082-636-A)
Cut
EE3310
Page of 16
Display

Sony ILCE-3000K / ILCE-3500J (serv.man2) Service Manual ▷ Download