Sony DSLR-A580 / DSLR-A580J / DSLR-A580L / DSLR-A580Y Service Manual ▷ View online
DSLR-A580/A580J/A580L/A580Y_ADJ
Sony Corporation
Revision History
Auto-ADJ
Ver.
Date
History
Contents
983453952.pdf
2011F05-1
© 2011.06
Published by Sony Techno Create Corporation
Ver. 1.1 2011.06
DSLR-A580/A580J/
A580L/A580Y
—
Replacement of the previously issued SERVICE MANUAL 9-834-539-51 with this
Manual.
• Change of Adjust Base data
(Version
Manual.
• Change of Adjust Base data
(Version
2.0
→ Version 2.1)
• Change of module data
(Version
(Version
1.0
→ Version 1.1)
• Windows7 64bit compatible
S.M. revised: Top cover
S.M. revised: Top cover
Official Release
Revised-1
(A1 11-140)
(A1 11-140)
2010.09
2011.06
1.0
1.1
9-834-539-52
To adjust DSLR-A580/A580L/A580/Y/A580J, use “Adjust Base for DSLR Version 2.[]” (hereinafter referred to as the
“Adjust Base Ver. 2.[]”) in addition to the Adjustment Module.
Note that you will not be able to use the existing Adjust Base for DSLR Version 1.0.0.1 (hereinafter referred to as
the “Old-version Adjust Base”).
To use the Adjustment Module, install it in the Adjust Base Ver. 2.[].
“Adjust Base Ver. 2.[]”) in addition to the Adjustment Module.
Note that you will not be able to use the existing Adjust Base for DSLR Version 1.0.0.1 (hereinafter referred to as
the “Old-version Adjust Base”).
To use the Adjustment Module, install it in the Adjust Base Ver. 2.[].
Note: The module data used in the Old-version Adjust Base can be used with Adjust Base Ver. 2.[]. It is not necessary to use the Old-version Adjust Base.
If you want to inherit the module data, move the module data from the current module folder and save before uninstalling the Old-version Adjust Base.
1. How to Move and Save the Module Data
1-1. On the Desktop, create a folder for saving data.
1-2. Run the Old-version Adjust Base.
1-3. From the [File] menu, select [Open Module Folder].
1-1. On the Desktop, create a folder for saving data.
1-2. Run the Old-version Adjust Base.
1-3. From the [File] menu, select [Open Module Folder].
1-4. The module folder appears on Explorer. Move the module data you want to inherit in Adjust Base Ver. 2.[] to the folder created for saving the
data.
1-5. Exit the Old-version Adjust Base.
DSLR-A580/A580J/A580L/A580Y_ADJ
– 2 –
2. How to Uninstall the Old-version Adjust Base
Select ‘Adjust base for DSLR Ver1001’ from “Add or Remove Programs” in “Control Panel.” Click [Remove] to start uninstallation.
Select ‘Adjust base for DSLR Ver1001’ from “Add or Remove Programs” in “Control Panel.” Click [Remove] to start uninstallation.
3. How to Install ‘.NET Framework 2.0’
Download the dotnetfx.exe file compatible with your OS from Microsoft HP and install it on you computer.
Download the dotnetfx.exe file compatible with your OS from Microsoft HP and install it on you computer.
Note: This step is not necessary if .NET Framework 2.0 is already installed.
4. How to Install Adjust Base Ver. 2.[]
4-1. Unzip the zipped file (Adjust-base_DSLR_Ver_2[].zip).
4-1. Unzip the zipped file (Adjust-base_DSLR_Ver_2[].zip).
The installation procedure starts when you run the unzipped file (AdjustBaseForDSLR_Ver_2[]_setup.msi).
4-2. The [Welcome to Adjust base for DSLR Setup Wizard] screen appears. Click [Next].
4-3. Select the installation destination and click [Next].
4-4. The Confirmation Installation screen appears. Click [Next].
DSLR-A580/A580J/A580L/A580Y_ADJ
– 3 –
4-5. The installation will be executed.
4-6. Once installation is complete, the Installation Complete screen appears. Click [Close] and exit the installer.
5. How to Install the Saved Module Data
5-1. Run Adjust Base Ver. 2.[].
5-2. From the [File] menu, select [Open Module Folder].
5-1. Run Adjust Base Ver. 2.[].
5-2. From the [File] menu, select [Open Module Folder].
5-3. The module folder appears on Explorer. Move the module data from the folder created for saving the data to the module folder.
5-4. Return to Adjust Base Ver. 2.[], and then from the [File] menu, select [Update Model Menu].
5-5. The [MODEL] menu opens. Check the module you installed.
DSLR-A580/A580J/A580L/A580Y_ADJ
– 4 –
6. How to Install the Adjustment Module
6-1. Unzip the module data (DSLR-A580_Ver_1[].zip) for DSLR-A580.
6-2. Run Adjust Base Ver. 2.[]. If it is already running, terminate all tests and cancel the connection.
6-3. From the [File] menu, select [Open Module Folder].
6-1. Unzip the module data (DSLR-A580_Ver_1[].zip) for DSLR-A580.
6-2. Run Adjust Base Ver. 2.[]. If it is already running, terminate all tests and cancel the connection.
6-3. From the [File] menu, select [Open Module Folder].
6-4. The module folder appears on Explorer. Drag and drop the old-version module in the Recycle Bin.
6-5. Copy the unzipped module to the module folder.
6-6. Return to Adjust Base Ver. 2.[], and then from the [File] menu, select [Update Model Menu].
6-7. The [MODEL] menu opens. Select the model you installed.
6-8. Check the updated contents.
You can now use the Adjustment Module.
Note: Be sure to follow the above procedure to install the module. Not following the proper procedure may lead to errors.
Display