Sony DSLR-A300 Service Manual ▷ View online
2-22
DSLR-A300_L2
2-10.GREASE APPLICATION AREA
Grease uses G-85 (J-6082-626-A).
Shutter Cam Gear Assy
Front Frame Assy
Mirror Charge Cam Gear
Grease
Grease
Ring (SP)
Ring Roller (C) Shaft
Grease
Grease
Grease
Grease
Grease
Grease
Grease
2-23
DSLR-A300_L2
2-11.CLEANING PROCEDURE OF OLPF
<Preparation>
Make it to Cleaning Mode of Power On/Set Up Menu by using the AC power supply.
(It comes to Mirror Up/Shutter Open)
Make it to Cleaning Mode of Power On/Set Up Menu by using the AC power supply.
(It comes to Mirror Up/Shutter Open)
Note:
Use the AC power supply absolutely.
<Cleaning Method>
1.
1.
Soak a small amount of EE3310 (Liquid cleaner) after wrapping the cleaning cloth (J-6082-636-A) around the cleaning
jig (J-6082-635-A).
jig (J-6082-635-A).
2.
Surface of OLPF is cleaned. (Note that there is no wipe irregularity)
3.
Power off. (It comes to Shutter Close/Mirror Down)
Note:
The cleaning of the OLPF must use a specified jig. If the specified jig is not used, the low pass filter might be
damaged.
OLPF
Cleaning Jig
(J-6082-635-A)
(J-6082-635-A)
Cleaning Cloth
(J-6082-636-A)
(J-6082-636-A)
Cut
EE3310
2-24
DSLR-A300_L2
2-12.CLEANING PROCEDURE OF VIEWFINDER
Note: Confirm it is the same before the following item cleans it after cleaning the
viewfinder.
1. Digital zoom check
2. Inclination of Live view image
3. Resolution of Live view image in surrounding
1. Digital zoom check
2. Inclination of Live view image
3. Resolution of Live view image in surrounding
1
2
3
4
1
Remove the connection of eight flexible board.
3
Remove the diopter adjust cam cover and the
diopter adjust click plate after removing one screw.
diopter adjust click plate after removing one screw.
Note:
Removed parts are not supplied.
Please recycle.
Please recycle.
Diopter Adjust
Click Plate
Click Plate
Diopter Adjust Cam Cover
Screw
2
Pull out three bosses from AE-032 flexible board.
AE-032 flexible board
Boss
Boss
Boss
–
Rear View
–
–
Top View
–
5
6
7
8
2-25E
DSLR-A300_L2
5
Clean dust with the blower.
Blower
Screw
Caution:
Never touch two screws.
Don't touch
4
Remove the beam splitter block after removing
two screws.
two screws.
Note:
Removed parts are not supplied.
Please recycle.
Please recycle.
Beam Splitter Block
Click on the first or last page to see other DSLR-A300 service manuals if exist.