Sony DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W (serv.man3) Service Manual ▷ View online
6-24
DSLR-A100_ADJ
12.
AF Area Adjustment
Adjustment
1. Set up the equipment as in Fig. 1.
2. Set the camera to the adjsutment mode.
2. Set the camera to the adjsutment mode.
Refer to “Starting up the DSLR-A100 adjustment program (in the adjustment mode)”.
3. Click “AF”of the adjustment menu. “Does it adjust?” appears.
4. Click “YES”. “Please select menu” appears.
5. Click “AREA” and then click “START”. Automatic adjustment starts and displays waveform and readings.
4. Click “YES”. “Please select menu” appears.
5. Click “AREA” and then click “START”. Automatic adjustment starts and displays waveform and readings.
Check that each line has two dents like the ones in Fig. 2, and the readings X0 and Y0 are within the standard. If Y0 reading is beyond
the standard, follow the adjustment procedure below.
the standard, follow the adjustment procedure below.
6. Adjust the sub-mirror position as in Fig. 3.
7. After completion of adjustment, click “STOP” and then “END”.
7. After completion of adjustment, click “STOP” and then “END”.
Fig. 1
Fig. 2
Fig. 3
Standard X0: 0
± 0.35 mm (check only)
Y0: 0
± 0.2 mm
AF master lens
Lens mount surface
Align center of each island with the chart.
AF chart
III
AF chart
III
1,955 mm
CAMERA
Focus mode: MF
Sub-mirror
Adjusting Screw
Adjusting Screw
6-25
DSLR-A100_ADJ
13.
Pitch Yaw Adjustment
Adjustment
Pitch Adjustment
Pitch Adjustment
1. Set camera to adjustment mode.
Refer to “Starting up the DSLR-A100 adjustment program (in the adjustment mode)”.
2. Set up the equipment as in Fig. 1.
3. Set the brightness of Luminanc box to EV10.
4. Attach AF-Y/P Adjuster to the camera, and set Pitch Adjusting Plate as in Fig. 1.
5. Click “AF” of the adjustment menu. “Does it adjust?” appears.
6. Click “YES”. “Please select menu” appears.
7. Click “PITCH/YAW” and then click “PITCH”. Automatic adjustment starts.
8. Adjust the Pitch Adjusting Screw (Fig. 3) so that the reading (Fig. 2) is within the standard.
3. Set the brightness of Luminanc box to EV10.
4. Attach AF-Y/P Adjuster to the camera, and set Pitch Adjusting Plate as in Fig. 1.
5. Click “AF” of the adjustment menu. “Does it adjust?” appears.
6. Click “YES”. “Please select menu” appears.
7. Click “PITCH/YAW” and then click “PITCH”. Automatic adjustment starts.
8. Adjust the Pitch Adjusting Screw (Fig. 3) so that the reading (Fig. 2) is within the standard.
If not, follow the adjustment procedure below.
9. If the reading is within the standard, click “STOP”.
Yaw Adjustment
10. Attach AF-Y/P Adjuster to the camera, and set Yaw Adjusting Plate as in Fig. 1.
11. Click “YAW”. Automatic adjustment starts.
12. Adjust the Yaw Adjusting Screw (Fig. 3) so that the reading (Fig. 2) is within the standard.
13. If the reading is within the standard, click “STOP”. Perform PITCH adjustment again.
14. Check that the readings are within the standard by repeating PITCH and YAW adjustment.
11. Click “YAW”. Automatic adjustment starts.
12. Adjust the Yaw Adjusting Screw (Fig. 3) so that the reading (Fig. 2) is within the standard.
13. If the reading is within the standard, click “STOP”. Perform PITCH adjustment again.
14. Check that the readings are within the standard by repeating PITCH and YAW adjustment.
Item
Standard
Pitch
0.77 – 1.30
Yaw
0.73 – 1.37
Fig. 3
Fig. 1
Luminance box
Insert the plate
unit it stops.
unit it stops.
Pitch Adjusting Plate
AF-Y, P adjuster
Pitch Adjustment
YawAdjustment
Yaw Adjusting Plate
Insert the plate
unit it stops.
unit it stops.
Yaw Adjusting
Screw
Pitch Adjusting
Screw
Screw
(Yaw)
(Pitch)
Adjust so that there is no difference in waveform
between left and right side of screen.
between left and right side of screen.
Fig. 2
6-26
DSLR-A100_ADJ
14.
FLATNESS Adjustment
Procedure of the adjustment
1. Set camera to adjustment mode.
Refer to “Starting up the DSLR-A100 adjustment program (in the adjustment mode)”.
2. Set the camera and the measuring instrument as in Fig.1.
3. Set the brightness of the luminance box to EV 8.
4. Click “FLATNESS” of the adjustment menu. “Does it adjust?” appears.
5. Click “YES” and then click “START”. Automatic adjustment starts.
6. “OK” appears when adjustment is completed. (Fig. 2)
3. Set the brightness of the luminance box to EV 8.
4. Click “FLATNESS” of the adjustment menu. “Does it adjust?” appears.
5. Click “YES” and then click “START”. Automatic adjustment starts.
6. “OK” appears when adjustment is completed. (Fig. 2)
* Select the island and wave form after the flatness adjustment enables dust check.
15.
EZ Check / Adjustment
Preparation of the EZ Check / adjustment
Set up the camera, chart and lighting as in Fig.1.
Fig. 1
Fig. 1
Fig. 2
Luminance box
AF master lens
Lens mount surface
Inverter type
fluorescent lamp
fluorescent lamp
Setting for EZ check and adj.
AF chart
I
,
II
AF chart
II
AF chart
I
1,955 mm
CAMERA
Focus mode: MF
6-27
DSLR-A100_ADJ
16.
EZ Adjustment
Note:
Be sure to perform the adjustment for all island groups in series according to the display after replacing CCD UNIT.
Procedure of the adjustment
1. Set up the equipment (Refer to “Preparation of the EZ Check / adjustment”).
2. Set the camera to the adjustment mode.
2. Set the camera to the adjustment mode.
Refer to “Starting up the DSLR-A100 adjustment program (in the adjustment mode)”.
3. Click “EZ” of the adjustment menu. “Please select menu” appears.
4. Click “ADJUST”.
5. “Does it adjust?” appears. Click “YES”.
6. “Adjust <3, 4, 6 ISLAND> Please set chart position as < A >” appears. (Fig. 1)
4. Click “ADJUST”.
5. “Does it adjust?” appears. Click “YES”.
6. “Adjust <3, 4, 6 ISLAND> Please set chart position as < A >” appears. (Fig. 1)
7. Set the AF chart I (Horizontal), and adjust the focus frame to the specified position and click “OK”.
8. Repeat step 7. (Form position < A > to < D >)
9. “Adjust <5 ISLAND> Please set chart position as < E >” appears. (Fig. 3)
9. “Adjust <5 ISLAND> Please set chart position as < E >” appears. (Fig. 3)
Fig. 1
D C B A
3rd. 4th. 6th.
AF chart
I
(Horizontal)
Focus Frame
Following the message, adjust the upper right corner of
focus frame to A - D position of AF chart
focus frame to A - D position of AF chart
I
.
Fig. 2
Fig. 3
Click on the first or last page to see other DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W (serv.man3) service manuals if exist.