DOWNLOAD Sony DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W (serv.man3) Service Manual ↓ Size: 2.38 MB | Pages: 67 in PDF or view online for FREE

6-9

DSLR-A100_ADJ

DSLR-A100 Adjustment Program enables adjustment of DSLR-A100

The PC loaded on either Windows 2000 Professional or XP and USB terminal originally
40MB or more of available memory and 15MB or more of available hard-disk space
VGA or more monitor capable of displaying at least 32,000 colors

Extract the file compressed in the ZIP format (DSLR-A100.zip). Execute the extracted file (DSLRadj_csSetup.msi), and the installer will
start. Install the program following the instructions given on the installer screen.
• DSLR-A100 Adjustment Program (DSLRadj_cs.exe)
• Flash Adjustment Program (FlashAdjustment.exe)
• Lens Adjustment Program (LensAdjustment.exe)

1. Connect the camera and PC with the USB cord with connector, and then set camera to adjustment mode.

Refer to “Starting up the DSLR-A100 adjustment program (in the adjustment mode)”.

2. PC detects the hardware, “Found New Hardware Wizard” is appeared.
3. “What do you want the wizard to do?” is displayed, select “Install from a list or specific location”, and then click “Next”. (Fig. 1)

4. Select “Don't search. I will choose the driver to install.” and then click “Next”. (Fig. 2)

6-10

DSLR-A100_ADJ

5. Click “Have Disk...”. (Fig. 3)

 At this time, do not click “Next”.

6. Click “Have Disk....”, and the following screen will be displayed. Click “Browse...”, and after selecting the folder “C:\Program Files\Sony

AMC\DSLRadj_cs\USB” folder, click “OK”. (Fig. 4, Fig. 5)

7. At this time, when you click “Next”, the installation starts. (Fig. 3)
8. “The wizard has finished installing the software for:” is displayed and installation complete. (Fig. 6)

1. Right click on “My Computer” icon and select “Properties”.
2. Select “Hardware” tab and click “Device Manager” button.
3. Check whether “Universal USB Driver (USB ADJ)” is displayed under the tree of “USB device for UUSBD”.

1. Insert the “DSLR-A100 Firm CD” into the CD-ROM drive of PC.
2. Copy “ram.bin” in “Adj Firm” folder of CD-ROM to the root of CF card.

6-11

DSLR-A100_ADJ

Connect the camera and PC with USB cable and start up the camera in the “adjustment mode.”
“Adjustment mode” means the condition of that the camera can contact with the DSLR-A100 adjustment program in the PC.

1. Connect the camera and PC with the USB cord with connector.
2. Set the mode dial of camera to “M”.
3. Turn the POWER switch of the camera to OFF, then turn the POWER switch to ON while pressing the shutter button halfway down

with pressed the “v” button of controller keys and MENU buttons.

4. Check that the remaining number of recordable images on the LCD monitor is “BBBB”.

Or, the display of In-F (viewfinder) becomes “ASIC 88”.

When “BBBB” is displayed, the camera activates in the adjustment mode. (Fig. 1)

5. Start up the DSLR-A100 adjustment program, “DSLRadj_cs.exe”.

“Please select camera code.” appears. (Fig. 2)

6-12

DSLR-A100_ADJ

6. Select “DSLR-A100” from “CAMERA MODEL” in the window, according to the display.

“Please connect DSLR-A100 and click START!” appears. (Fig. 3)

7. Click the “CONNECT” button.

“FIRMWARE VERSION READ-OUT has completed!” appears. (Fig. 4)

In the condition that a function button cannot be used such as Aori adjustment, start up the camera using a CF card with adjustment
program.

1. Insert the CF card with POWER switch on, no power supply (battery), and “M” mode.
2. Connect the camera and PC with the USB cord with connector.
3. Connect the AC adaptor (power supply) while pressing the lens release button.
4. Release the lens release button after access lamp lit, the camera starts from the CF card.

Frame counter will be “BBBB” and the camera starts up in adjustment mode. (Fig. 1)
Or, the display of In-F (viewfinder) becomes “ASIC 88”.

5. Same as 5, 6, 7 of the above method 1.

1. Click “END” in the window of the DSLR-A100 adjustment program.
2. Remove the AC adapter.