DSLR-A100, DSLR-A100H, DSLR-A100K, DSLR-A100W (serv.man3) — Sony Digital Camera Service Manual (repair manual)

Model
DSLR-A100 DSLR-A100H DSLR-A100K DSLR-A100W (serv.man3)
Pages
67
Size
2.38 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / SECTION 6 ADJUSTMENTS
File
dslr-a100-dslr-a100h-dslr-a100k-dslr-a100w-sm3.pdf
Date

View Sony DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W (serv.man3) Service Manual online

SECTION 6
ADJUSTMENTS
Revision History
Revision History
Link
Link
To activate without exterior parts
Required adjustment, setting and confirmation 
items after repairing (exchanging parts)
Related adjustment and required setting items
List of service tools
Before starting adjustments
OSD LANGUAGE SETUP
ERROR CODE ON ADJUSTMENT PROGRAM
VIDEO SYSTEM ADJUSTMENTS
LCD SYSTEM ADJUSTMENTS
CAMERA SYSTEM ADJUSTMENTS
PREPARATIONS BEFORE ADJUSTMENTS
ADJUSTMENTS
FLASH LEVEL SHIFT
LIGHT SOURCE-A MAINTENANCE
LCD ALL SEGMENT ON
CAMERA LOG
SERVICE MODE
Sony EMCS Co.
Auto-ADJ
DSLR-A100_ADJ
SCREEN DUST
STANDARD
SETTING OF PHOTOSHOP
CONDITION OF MEASURE AND APPRECIATION
CHECK LIST
DSLR-A100
Ver. 1.3  2007.10
9-852-130-53
• Use this Service Manual together with the DSLR-A100 Adjustment Program (DSLRadj_cs.exe).
• Preparing the DSLR-A100 adjustment program
• Precaution on Replacing the AM-001 Board
2007J0500-1
© 2007.10
Published by Kohda TEC
— 2 —
DSLR-A100_ADJ
TABLE OF CONTENTS
Section
Title
Page
6.
ADJUSTMENTS
Before Starting Adjustments ····················································· 6-1
1. To Activate without Exterior Parts ········································ 6-2
2. Required Adjustment, Setting and Confirmation Items after
Repairing (Exchanging Parts) ··············································· 6-3
3. Related Adjustment and Required Setting Items ·················· 6-5
4. List of Service Tools ····························································· 6-6
6-1. Adjustments ······································································· 6-8
1-1. Preparations Before Adjustments ······································· 6-8
1-2. Camera System Adjustments ··········································· 6-14
1-3. Video System Adjustments ·············································· 6-38
1-4. LCD System Adjustments ················································ 6-40
1-5. OSD Language Setup ······················································· 6-42
1-6. Error Code on Adjustment Program ································ 6-43
6-2. Service Mode ··································································· 6-50
2-1. Camera Log ······································································ 6-50
2-2. LCD All Segment ON ······················································ 6-52
2-3. Flash Level Shift ······························································ 6-52
2-4. Light Source-A Maintenance ··········································· 6-53
6-3. Check List ········································································ 6-54
3-1. Condition of Measure and Appreciation ·························· 6-54
3-2. Setting of Photoshop ························································ 6-55
3-3. Screen Dust ······································································ 6-56
3-4. Standard ··········································································· 6-57
*
The AF assist chart is shown on page 6-64.
6-1
DSLR-A100_ADJ
SECTION  6
ADJUSTMENTS
Before starting adjustments
Precaution on Replacing the AM-001 Board
When the AM-001 board was replaced, perform “Firmware Rewriting” and then make all adjustments, and finally
perform “OSD Language Setup”.
Firmware Rewriting
Note 1:
Use the AC adapter or fully charged battery whenever rewriting the firmware.
Do not remove the battery or AC adapter while the Access lamp is lighting.
Otherwise, the firmware update from the CF card will fail.
1. Copy all files in the “System” folder in the “DSLR-A100 Firmware CD” to the route directory of the CF card.
2. Turn off the POWER switch of the camera, and insert the “Firmware Update” CF in the camera.
3.  Set the AC adapter (battery).
4. Turn on the POWER switch while pressing the Lens Remove button.
5. After the Access lamp turns on, release the Lens Remove button, and the firmware update from the CF card will
start.
6. In about 2 minutes, the access lamp will turn off or blink to indicate that the update has completed.
Note 2:
As the camera does not operate when the firmware update completed, remove and install the battery.
6-2
DSLR-A100_ADJ
1.
To activate without exterior parts
Short-circuit the pattern-A of FP-528 flexible board with solder.
When using replacement FP-528 flexible board, no need to short these patterns because it has pattern-B.
Note:
Before installing BACK COVER ASSY, be sure to unsolder the pattern-A or to cut the pattern-B.
Pattern-A
FP-528 flexible board
Pattern-B
Cut
6-3
DSLR-A100_ADJ
Table 6-1-1 (1)
2.
Required adjustment, setting and confirmation items after repairing (exchanging parts)
Adjust, set and confirm as the following table when the following parts are removed (exchanged).
Follow the steps from the upper line to adjust.
Removed
Replaced
Removed
Replaced
Removed
Replaced
Removed
Replaced
Removed
Replaced
Removed
Replaced
Removed
Replaced
Removed
Replaced
Removed
Replaced
VB
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
PI-PR
z
z
z
FREQUENCY
z
z
z
z
SERVO
z
z
z
z
GYRO
z
z
z
z
z
z
z
z
AORI&CENTER
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
SS
z
z
z
z
z
z
z
z
AREA
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
PITCH, YAW
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
EZ
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
FLATNESS
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
PRETRIGGER
z
z
z
z
AE
z
z
CCD GAIN
z
z
z
DEFECT PIXEL
z
z
z
BI FLASH
z
z
WB
z
z
z
SHAKE GAIN
z
z
z
z
z
z
VOUT
z
z
LCD
z
z
OSD LANGUAGE
z
z
CCD INCLINATION
z
z
Resolution Check
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
AE Check (Regular Light)
z
z
z
z
z
z
z
z
z
z
AE Check  (Flash Light)
z
z
z
z
z
z
z
z
z
z
z
Grayscales
z
z
Color Reproduction
z
z
Current Consumption
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
BC Voltage
z
z
REFLECTIONS UNIT
SHUTTER
APERTURE UNIT
                         PARTS
 
ADJUSTMENT and
CHECK
MAIN CAPACITOR UNIT
FP-528 FLEXIBLE BOARD
AF MODULE UNIT
CCD UNIT
AM-001 BOARD COMPLETE
POWER UNIT

Download Sony DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W (serv.man3) Service Manual (Repair Manual)

Here you can view online or download Sony DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W (serv.man3) Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Sony DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W (serv.man3) Digital Camera. Information contained in Sony DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W (serv.man3) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).