DOWNLOAD Sony DSC-WX350 (serv.man2) Service Manual ↓ Size: 6.47 MB | Pages: 42 in PDF or view online for FREE

DSC-WX350

4-15

Installation
1.  While matching the cabinet number with the circular mark and inserting the three bosses of the Linear Barrel into the three grooves of the 

2nd Cam Barrel, install the 2nd Cam Barrel to the Linear Barrel. Fully turn the 2nd Cam Barrel clockwise.

 

Cabinet
Number

Circular mark

Bosses

Boss

Groove

Linear Barrel

2nd Cam Barrel

2nd Cam Barrel

2.  While inserting the three bosses of the 3rd Group Assy into the three grooves of the 2nd Cam Barrel, install the 3rd Group Assy to the 2nd 

Cam Barrel and the Linear Barrel and then fully turn the 3rd Group Assy clockwise.

 

Grooves

2nd Cam Barrel,
Linear Barrel

Circular mark

3rd Group Assy

Boss of wide
guide

Bosses of narrow
guide

3rd Group Assy

3.  While setting the marks of the 2nd Group Assy and the 3rd Group Assy at the position shown below and inserting the three bosses of the 

2nd Group Assy into the three grooves of the 2nd Cam Barrel, install the 2nd Group Assy to the 2nd Cam Barrel.

 

Boss

Grooves of the
2nd Cam Barrel

Groove of the
2nd Cam Barrel

2nd Group Assy

Mark

Mark of the 3rd Group Assy

Bosses

Boss

2nd Group Assy

DSC-WX350

4-16

4.  Set the flexible board of the Core unit_3 and the concave into which the projection part of the Ornamental Ring A of the 1st Group Assy at 

the positions shown below.

 

While inserting the three bosses of the Core unit_3 into the three grooves of the 1st Group Assy, attach the 1st Group Assy to the Core 
unit_3.

 

1st Group Assy

Core unit_3

Bosses

Boss

Concave into which
the projection part of
the Ornamental Ring A

Description is provided here with the Ornamental Ring A and the Barrier Base removed.
For disassembling and assembling methods of the Ornamental Ring A and the Barrier 
Base, refer to "(1) Barrier Base Replacing Method".

Grooves

Flexible Board

5.  Match the cabinet number of the 1st Cam Barrel Assy with the flexible board of the Core unit_3, and gently attach the 1st Cam Barrel Assy.

Push the 1st Cam Barrel Assy and engage the three claws.

6.  Check that the lens moves smoothly from the retracted to the TELE end.

 

Flexible Board

1st Cam Barrel Assy

Hooks

Claws of the
3rd Group Assy

Push the 1st Cam Barrel Assy and
engage the three claws.

Cabinet
Number

Description is provided here with the Ornamental Ring A and the Barrier Base removed.
For disassembling and assembling methods of the Ornamental Ring A and the Barrier 
Base, refer to  "(1) Barrier Base Replacing Method".

7.  While setting the rounded cutout of the Linear Cam Barrel and the edge of gear of the Drive Gear Barrel at the position shown below, install 

the Linear Cam Barrel to the Drive Gear Barrel.

 

Drive Gear Barrel

Linear Cam Barrel

Rounded cutout

Edge of gear

DSC-WX350

4-17

8.  Set the gear of the Drive Gear Barrel at a position where the gear is shifted by about 1.5 teeth in the direction of arrow A from the rounded 

cutout of the Linear Cam Barrel.

9.  While inserting the eight bosses of the Core unit_2 into the eight grooves of the Linear Cam Barrel and the Drive Gear Barrel, install the 

Core unit_2 to the Linear Cam Barrel and the Drive Gear Barrel.

 

Linear Cam Barrel,
Drive Gear Barrel

Core unit_2

Bosses

Grooves

Flexible
Board

Rounded
cutout

A

Rounded cutout

Gear

1.5 teeth

10. While inserting the six bosses of the Core unit_1 into the six grooves of the Fixed Barrel, install the Core unit_1 to the Fixed Barrel.

 

Fixed Barrel

Bosses

Grooves

Core unit_1

Hole of the Fixed Barrel for passing
the Flexible Board

11.  Push the Linear Cam Barrel to protrude it to the object side so that the Drive Gear Barrel can be held.
12. Pull down the Drive Gear Barrel to the maximum.
13. Turn the Drive Gear Barrel clockwise to the maximum.

 

Drive Gear Barrel

Object side

Linear Cam Barrel

DSC-WX350

4-18

14. Pass the flexible board through the hole of the Fixed Barrel.
 

Hook the two projections of the flexible board to the two claws of the Fixed Barrel.

15. Set the lens unit in the retracted state.

 

Hole of the
Fixed Barrel

Projections and Claws

Flexible Board

Flexible Board

16. Install the Rear Lens Assy.
17. Install the Naruto Gear.

Note: Install the Naruto Gear with its boss side coming to the rear side.

 

Z Motor Assy

Rear Lens Assy

Boss

Naruto Gear

18. Connect the connector and arrange the flexible board as shown below.

 

Flexible Board

Z Motor Assy

Connector

Rib

Bosses

Ribs