Sony DSC-WX350 (serv.man2) Service Manual ▷ View online
DSC-WX350
4-4
4-3-2. Main Section
• Disassembly order
No.
Part
Item
Note
1
ST Flexible Fixed Sheet
2
Front Section
Connector x 1
3
Lens Block Section
Connector x 2
Refer to “Notes on Assembling the Lens Unit” when assembling. (Page 4-6)
4
SP Sheet Metal
Claw x 2
5
SY-1031 Board
Claw x 1
Refer to “Notes on Assembling the Speaker Unit” when assembling. (Page 4-6)
6
Loudspeaker (0.8cm)
Solder x 2
Hold the Lens Block at the
center of both sides.
center of both sides.
Do not hold the following part.
Hold here.
PRECAUTIONS WHEN HOLDING THE LENS BLOCK
Lens Barrier
Very weak
Focus Motor
Very weak
Focus Motor
Very weak
Zoom Motor
Very weak
Focus Lens
Very weak
6
BT Holder Assy
3
4
5
2
1
Claw
Claws
DSC-WX350
4-5
4-3-3. Front Block Section
• Disassembly order
No.
Part
Item
Note
1
Cabinet (Front) Assy
#212 x 1
Claw x 1
Claw x 1
2
Lithium Holder
Claw x 2
3
Lithium Rechargeable
Battery
Battery
Solder x 1
4
MIC Retainer, MIC
Cushion
Cushion
#276 x 1
This screw cannot be reused. Discard the screw removed once in servicing. Instead,
use a new screw.
use a new screw.
5
ST-1020 Flexible Board
Refer to “Notes on Assembling the ST-1020 Flexible Board” when assembling. (Page
4-6)
4-6)
6
Plate (Rotary Base)
#276 (4)
Cabinet (Upper) Assy
#212 (1)
Claw
Claws
2
3
4
5
6
1
1.4
3.0
#212: M1.4 X 3.0
(Silver)
4-270-114-01
4-270-114-01
#276: M1.4 X 3.0 (Tapping)
(Silver)
3-348-998-41
3-348-998-41
3.0
1.4
DSC-WX350
4-6
4-3-4. Complementary Information
(1) Notes on Assembling the Lens Unit
Hook the flexible board to the claw.
Flexible Board
Claw
(2) Notes on Assembling the Speaker Unit
Route the speaker harnesses as shown below.
Speaker
Harnesses
Harnesses
Ribs
(3) Notes on Assembling the ST-1020 Flexible Board
Install the ST-1020 Flexible Board as shown below.
ST-1020
Flexible Board
Flexible Board
Claw
Claw
Boss
Claw
(4) Notes on Assembling the LCD Unit
Claws
Claws
NG
OK
LCD Unit
LCD Unit
DSC-WX350
4-7
Note on removing the Cabinet (Rear) Assy
Remove the Cabinet (Rear) Assy as shown below to prevent
the hinge of the PLAY button from being deformed.
the hinge of the PLAY button from being deformed.
1. Remove the Wi-Fi side of the Cabinet (Rear) Assy.
Cabinet (Rear) Assy
Hinge part of the
Play Button
Play Button
2. Further lift the Wi-Fi side of the Cabinet (Rear) Assy while press-
ing the control button.
Control Button
3. Confirm that the Cabinet (Rear) Assy has passed over the control
button.
Control Button
4. Finally remove the control button side of the Cabinet (Rear) Assy.
Cabinet (Rear) Assy
Click on the first or last page to see other DSC-WX350 (serv.man2) service manuals if exist.