Sony DSC-W80 / DSC-W80HDPR / DSC-W85 (serv.man3) Service Manual ▷ View online
6-19
DSC-W80/W85_ADJ
1-5-3.
Adjusting Method
1.
Composite Video Level Adjustment
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Video Adj.
2. Composite Video Level Adj.
3. VIDEO OUT Level Check
4. Release of Data Setting during Video Adj.
sequence]
1. Data Setting during Video Adj.
2. Composite Video Level Adj.
3. VIDEO OUT Level Check
4. Release of Data Setting during Video Adj.
[Adjusting method]
1) Click the [Start] button of the Composite Video Level Adj.
2) The Automatic Adjustment Program executes the “1. Data
1) Click the [Start] button of the Composite Video Level Adj.
2) The Automatic Adjustment Program executes the “1. Data
Setting during Video Adj.”.
3) If “1. Data Setting during Video Adj.” completed successfully,
the following screen is displayed during the execution of “2.
Composite Video Level Adj.”. Using the [Up]/[Down] button
on the screen, adjust so that the sync level of the video signals
satisfies the specified value. After the adjustment, click the
[End] button in the screen.
Composite Video Level Adj.”. Using the [Up]/[Down] button
on the screen, adjust so that the sync level of the video signals
satisfies the specified value. After the adjustment, click the
[End] button in the screen.
4) If the [End] button is clicked, “3. VIDEO OUT Level Check”
will be executed. The following message and screen are dis-
played. Check that the sync signal level and burst level of the
video signals satisfies the specified value, and click the [OK]
button in the message.
played. Check that the sync signal level and burst level of the
video signals satisfies the specified value, and click the [OK]
button in the message.
5) If the [End] button is clicked, “2. Composite Video Level Adj.”
and “4. Release of Data Setting during Video Adj.” will be
executed.
executed.
6) Upon successful completion of all item the Composite Video
Level Adjustment, the following message is displayed. Click
the [OK] button.
the [OK] button.
6-20
DSC-W80/W85_ADJ
2.
Component Video Level Adjustment
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Video Adj.
2. COMPONENT OUT Y Level Adj.
3. COMPONENT OUT Pb Level Adj.
4. COMPONENT OUT Pr Level Adj.
5. Release of Data Setting during Video Adj.
sequence]
1. Data Setting during Video Adj.
2. COMPONENT OUT Y Level Adj.
3. COMPONENT OUT Pb Level Adj.
4. COMPONENT OUT Pr Level Adj.
5. Release of Data Setting during Video Adj.
[Adjusting method]
1) Click the [Start] button of the Component Video Level Adjust-
1) Click the [Start] button of the Component Video Level Adjust-
ment.
2) The Automatic Adjustment Program executes the “1. Data
Setting during Video Adj.”.
3) If “1. Data Setting during Video Adj.” completed successfully,
the following screen is displayed during the execution of “2.
COMPONENT OUT Y Level Adj.”. Using the [Up]/[Down] but-
ton on the screen, adjust so that the Y signal level satisfies the
specified value. After the adjustment, check that the sync level
of the Y signals satisfies the specified value, and click the [End]
button in the screen.
COMPONENT OUT Y Level Adj.”. Using the [Up]/[Down] but-
ton on the screen, adjust so that the Y signal level satisfies the
specified value. After the adjustment, check that the sync level
of the Y signals satisfies the specified value, and click the [End]
button in the screen.
4) After that, the following screen is displayed during the execu-
tion of “3. COMPONENT OUT Pb Level Adj.”. Using the [Up]/
[Down] button on the screen, adjust so that the Pb signal level
satisfies the specified value. After the adjustment, check that
the sync level of the Pb signals satisfies the specified value,
and click the [End] button in the screen.
[Down] button on the screen, adjust so that the Pb signal level
satisfies the specified value. After the adjustment, check that
the sync level of the Pb signals satisfies the specified value,
and click the [End] button in the screen.
5) After that, the following screen is displayed during the execu-
tion of “4. COMPONENT OUT Pr Level Adj.”. Using the [Up]/
[Down] button on the screen, adjust so that the Pr signal level
satisfies the specified value. After the adjustment, check that
the sync level of the Pr signals satisfies the specified value,
and click the [End] button in the screen.
[Down] button on the screen, adjust so that the Pr signal level
satisfies the specified value. After the adjustment, check that
the sync level of the Pr signals satisfies the specified value,
and click the [End] button in the screen.
6) If the [End] button is clicked, the items from “2. COMPO-
NENT OUT Y Level Adj.” to “4. COMPONENT OUT Pr Level
Adj.” and “5. Release of Data Setting during Video Adj.” will
be executed.
Adj.” and “5. Release of Data Setting during Video Adj.” will
be executed.
7) Upon successful completion of all item the Component Video
Level Adjustment, the following message is displayed. Click
the [OK] button.
the [OK] button.
6-21
DSC-W80/W85_ADJ
1-6.
CAMERA SYSTEM ADJUSTMENTS
1-6-1.
Function of Each Button on Camera System
Adjustment Screen
Adjustment Screen
Click the [CAMERA SYSTEM ADJUSTMENT] button on the Main
Menu screen, and the “CAMERA SYSTEM ADJUSTMENT”
screen in Fig. 6-1-18 will appear.
Menu screen, and the “CAMERA SYSTEM ADJUSTMENT”
screen in Fig. 6-1-18 will appear.
Fig. 6-1-18
1
[To Menu] button
The Main Menu screen comes back.
The Main Menu screen comes back.
2
[Preparation] button
Notes for adjustment or jigs used are displayed.
Notes for adjustment or jigs used are displayed.
3
[Start] button
Each adjustment from “Camera Adjustment 1” to “Camera
Adjustment 7” starts.
Each adjustment from “Camera Adjustment 1” to “Camera
Adjustment 7” starts.
4
[Reboot] button
When this button is clicked, the camera is rebooted.
When this button is clicked, the camera is rebooted.
5
[Release Data Setting] button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the camera adjust-
ment 1 to 6. If the adjustment completed successfully, the data
setting is automatically cancelled and the button color returns
to “white”.)
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the camera adjust-
ment 1 to 6. If the adjustment completed successfully, the data
setting is automatically cancelled and the button color returns
to “white”.)
5
4
3
2
1
2
3
6-22
DSC-W80/W85_ADJ
1-6-2.
Adjustment Items of Camera System Adjust-
ment
ment
The adjustment items of camera system adjustment are as listed in
Table 6-1-4. The Automatic Adjustment Program divides the ad-
justment items into seven, camera adjustment 1 to 7. Clicking ei-
ther CAMERA Adjustment Start button allows the adjustment item
which corresponds to that button to be executed.
The adjustment conditions of the subject and filter vary depend-
ing on which item is adjusted. The Adjustment Program displays
an instruction for the subject and filter as a message during the
adjustment.
Table 6-1-4. The Automatic Adjustment Program divides the ad-
justment items into seven, camera adjustment 1 to 7. Clicking ei-
ther CAMERA Adjustment Start button allows the adjustment item
which corresponds to that button to be executed.
The adjustment conditions of the subject and filter vary depend-
ing on which item is adjusted. The Adjustment Program displays
an instruction for the subject and filter as a message during the
adjustment.
Note 1:
Dark Siemens star chart.
Table 6-1-4
Block
Page
Address
Auto Orientation Adj.
11
61
0E0A to 0E0D
CAMERA Adjustment 2
Flange Back Adj.
Siemens star chart with ND filter
for minipattern box (Note 1) or
Flange back adjustment jig
for minipattern box (Note 1) or
Flange back adjustment jig
11
61
0F1C, 0F1D,
0F20 to 0F3F,
0F20 to 0F3F,
CAMERA Adjustment 3
Flange Back Check
Siemens star
(1.0m from front the lens)
(Illuminance: 200 to 400 lux)
(1.0m from front the lens)
(Illuminance: 200 to 400 lux)
-
-
-
F No. Compensation
11
61
095A
Measure Gain Adj.
11
61
0964
Light Value Adj.
11
61
0961
Mechanical Shutter Adj.
11
61
0980, 0981,
0998, 0999
0998, 0999
AWB 3200K-5800K
Standard Data Input
Standard Data Input
11
61
0C00 to 0C21,
0C24 to 0C49
0C24 to 0C49
AWB 3200K-5800K Check
-
-
-
Color Reproduction
Adj. & Check
Adj. & Check
11
61
0C50 to 0C57
CCD Linearity Check
-
-
-
CCD White Defect
Compensation Check
Compensation Check
11
61
0200 to 02FF,
0300 to 03FF,
0400 to 04FF,
0500 to 05FF
0300 to 03FF,
0400 to 04FF,
0500 to 05FF
CCD Black Defect
Compensation Check
Compensation Check
11
61
0000 to 00FF,
0100 to 01FF,
0400 to 04FF,
0500 to 05FF
0100 to 01FF,
0400 to 04FF,
0500 to 05FF
CAMERA Adjustment 5
Strobe Adj.
Flash adjustment box (50 cm)
11
61
09C2, 09C3,
0C72 to 0C75
0C72 to 0C75
CAMERA Adjustment 6
Auto Focus Illumination Check
Flash adjustment box (50 cm)
11
61
0F10 to 0F15
CAMERA Adjustment 7
Angular Velocity Sensor
Sensitivity Adj.
Sensitivity Adj.
Not required
11
61
0E10, 0E11
0E00 to 0E04,
0E08, 0E09,
0E20 to 0E2F
0E08, 0E09,
0E20 to 0E2F
11
61
Not required
Adjusting Address
Clear chart
(Standard picture frame)
(Standard picture frame)
Button Name
Adjustment
Subject
9 color chart
(Standard picture frame)
(Standard picture frame)
CAMERA Adjustment 1
CAMERA Adjustment 4
Clear chart
(Standard picture frame)
(Standard picture frame)
Hall Adj.
Ver. 1.4 2008.05
Click on the first or last page to see other DSC-W80 / DSC-W80HDPR / DSC-W85 (serv.man3) service manuals if exist.