Sony DSC-W730 (serv.man2) Service Manual ▷ View online
DSC-W730_L2
2-5
2-1-3. LENS BLOCK SECTION
ns : not supplied
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
101
8-848-907-41
DEVICE, LENS LSV-1590A-LS (SERVICE) (Note 1, 2)
102
4-429-501-41
RING A, ORNAMENTAL (T)
103
A-1897-949-A BARRIER
ASSY(1590A-LS)
104
4-294-347-01 RETAINER,
FG
105
A-1897-703-A GEAR WH LUBRICATED ASSY
106
A-1897-691-A GEAR B LUBRICATED ASSY
107
A-1897-692-A GEAR A LUBRICATED ASSY
108
A-1896-929-A DC MOTOR WORM ASSY
109
A-1903-144-A DOC-6005 FLEXIBLE BOARD, COMPLETE
(including IC001 (CCD imager)) (Note 3)
#176 3-947-504-31 SCREW
(M1.2)
#258 4-299-468-11 SCREW,
TAPPING
UB1.2(CH)
(Note 1, 2)
109
(including IC001 (CCD imager))
(Note 3)
(Note 3)
101
103
102
107
108
106
105
104
#258
#258
#176
#258
ns
ns
ns
1. The meaning of the symbol in left figure is as follows. Be careful when you remove it.
◇
: Solder
DISASSEMBLY
Note
Lens Barrier
Very weak
Ornamental Ring
Zoom Motor
Very weak
Optical Stepping Motor
Very weak
Sensor
Flexible
Board
Board
Focus Lens
Very weak
Flexible
Board
Board
Note 1:
Hold the Lens Block at the
center of both sides.
center of both sides.
Do not hold the following part.
PRECAUTIONS WHEN HOLDING THE LENS BLOCK
Hold here.
Screw
#176: M1.2 X 2.0
(Silver)
3-947-504-31
3-947-504-31
2.0
1.2
#258: M1.2 X 3.5 (Tapping)
(Silver)
4-299-468-11
4-299-468-11
1.2
3.5
Note 2: Refer to the following each item when you exchange parts
of Lens Block
•
1-8.
ORNAMENTAL RING A REPLACING METHOD (page
1-7)
1-7)
•
1-9.
DC MOTOR WORN ASSY REPLACING METHOD (page
1-7)
1-7)
• 1-10. FINAL INSPECTION (page 1-9)
Note 3: Be sure to read “Precautions for Replacement of Imager” on
page 6-1 of Level3 when changing the imager.
Note 3: イメージャの交換時はLevel3の6-1ページ,“イメージャ交換
時の注意”を必ずお読みください。
Note 2: レンズブロックの各部品を交換する際は,下記の各項目を参
照してください。
•
1-8.
ORNAMENTAL RING A REPLACING METHOD (page
1-7)
1-7)
•
1-9.
DC MOTOR WORN ASSY REPLACING METHOD (page
1-7)
1-7)
•
1-10.
FINAL INSPECTION (page 1-9)
DSC-W730_L2
2-6E
ACCESSORIES
901
902
903
904
905
906
907
Ref. No. Part No.
Description
901
1-489-282-12
AC Adaptor AC-UB10/UB10B/UB10C/UB10D (BR, J)
901
1-489-282-21
AC Adaptor AC-UB10/UB10B/UB10C/UB10D (US, CND)
901
1-489-282-31
AC Adaptor AC-UB10/UB10B/UB10C/UB10D (CH)
901
1-489-282-61
AC Adaptor AC-UB10/UB10B/UB10C/UB10D (AEP, UK,
RU, E, AUS, KR, JE)
RU, E, AUS, KR, JE)
902
1-837-421-11
Power cord (mains lead) (UK, E (Saudi))
902
1-837-422-11
Power cord (mains lead) (JE)
902
1-837-427-11
Power cord (mains lead) (AEP, RU, E (EXCEPT Saudi))
902
1-837-429-11
Power cord (mains lead) (AUS)
902
1-837-428-11
Power cord (mains lead) (KR)
902
1-837-801-12
Power cord (mains lead) (BR)
903
1-569-007-12
Conversion (2P) Adaptor (JE)
904
1-569-008-12
Conversion (2P) Adaptor (E: NTSC)
905
1-834-311-51
Dedicated USB cable
906
2-050-981-01
Wrist strap (Gray) (BLUE, GREEN, PINK, SILVER)
906
2-050-981-11
Wrist strap (Black) (BLACK)
907
4-445-399-01
Instruction Manual (JAPANESE)
907
4-445-399-11
Instruction Manual (SIMPLIFIED CHINESE)
* 907
4-445-400-11
Instruction Manual (ENGLISH)
907
4-445-400-21
Instruction Manual (ENGLISH, SPANISH)
* 907
4-445-400-31
Instruction Manual (ENGLISH, FRENCH)
Ref. No. Part No.
Description
* 907
4-445-400-41
Instruction Manual (ENGLISH, RUSSIAN, UKRAINIAN)
* 907
4-445-400-51
Instruction Manual (ENGLISH, FRENCH, ITALIAN,
SPANISH, PORTUGUESE, GERMAN, DUTCH,
GREEK, POLISH, CZECH, HUNGARIAN, SLOVAK,
SWEDISH, FINNISH, NORWEGIAN, DANISH,
CROATIAN, ROMANIAN)
SPANISH, PORTUGUESE, GERMAN, DUTCH,
GREEK, POLISH, CZECH, HUNGARIAN, SLOVAK,
SWEDISH, FINNISH, NORWEGIAN, DANISH,
CROATIAN, ROMANIAN)
* 907
4-445-400-61
Instruction Manual (ENGLISH, TURKISH,
TRADITIONAL CHINESE, SIMPLIFIED CHINESE,
MALAY, INDONESIAN, THAI, ARABIC, PERSIAN)
TRADITIONAL CHINESE, SIMPLIFIED CHINESE,
MALAY, INDONESIAN, THAI, ARABIC, PERSIAN)
* 907
4-445-400-71
Instruction Manual (ENGLISH, SPANISH, BRAZILIAN
PORTUGUESE)
PORTUGUESE)
* 907
4-445-400-81
Instruction Manual (ENGLISH, TRADITIONAL
CHINESE, SIMPLIFIED CHINESE, INDONESIAN,
ARABIC, PERSIAN)
CHINESE, SIMPLIFIED CHINESE, INDONESIAN,
ARABIC, PERSIAN)
* 907
4-445-400-91
Instruction Manual (ENGLISH, SPANISH, BRAZILIAN
PORTUGUESE, TRADITIONAL CHINESE, SIMPLIFIED
CHINESE, KOREAN)
PORTUGUESE, TRADITIONAL CHINESE, SIMPLIFIED
CHINESE, KOREAN)
907
4-445-401-21
Instruction Manual (KOREAN)
* 907
4-445-401-32
Instruction Manual (ENGLISH, ARABIC, PERSIAN)
Note 1: Dedicated A/V cable (optional accessory)
Dedicated A/V cable is not supplied with this model.
If you need dedicated A/V cable, order 1-834-312-4[] or VMC-
15CSR1.
15CSR1.
Note 2: This unit has no bundled CD-ROM.
Contents included in the CD-ROM will be supplied to customers as
follows.
Contents included in the CD-ROM will be supplied to customers as
follows.
・ User Guide (HTML)
- You can access to the URL of support site described in the Instruc-
tion Manual.
- All of the contents in the User Guide are included in the Instruction
Manual or built-in guide.
・ Application Software
- If a customer requests the CD-ROM, consult with each Head
Quarters.
Ref. No. Part No.
Description
8-022-156-00
Rechargeable battery pack NP-BN1 (J)
8-022-156-33
Rechargeable battery pack NP-BN1 (US, CND)
8-022-156-51
Rechargeable battery pack NP-BN1 (AEP, UK, RU, E,
AUS, KR, BR, JE)
AUS, KR, BR, JE)
8-022-156-76
Rechargeable battery pack NP-BN1 (CH)
DSC-W730_L2
3-1E
3. ASSEMBLY
Assembly-1: Installation Method of Battery Terminal Board.
Fold the notch 3 or 4 times repeatedly to break.
Remove the notch.
Solder the battery terminal board on the SY-1005
Board.
* Battery terminal board is attached with
notch for installation.
Board.
* Battery terminal board is attached with
notch for installation.
Remove the battery terminal board by
bending the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery
terminal board will be bent.
bending the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery
terminal board will be bent.
Notch
Solder Position
(reflow soldering )
(reflow soldering )
Notch
SY-1005 Board
Battery terminal board
Notch
Battery terminal
board
board
Assembly-2: Multi Connector (Rec) 8P Soldering Position.
SY-1005 Board
SY-1005 Board
Multi Connector
(Rec) 8P
(Rec) 8P
Solder Position
Solder Position
Assembly-3: Precaution During Speaker Installation.
Route the speaker harness as shown below.
Speaker
Harness
Harness
Rib
DSC-W730_L2
3-1E
3. ASSEMBLY
Assembly-1: Installation Method of Battery Terminal Board.
Fold the notch 3 or 4 times repeatedly to break.
Remove the notch.
Solder the battery terminal board on the SY-1005
Board.
* Battery terminal board is attached with
notch for installation.
Board.
* Battery terminal board is attached with
notch for installation.
Remove the battery terminal board by
bending the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery
terminal board will be bent.
bending the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery
terminal board will be bent.
Notch
Solder Position
(reflow soldering )
(reflow soldering )
Notch
SY-1005 Board
Battery terminal board
Notch
Battery terminal
board
board
Assembly-2: Multi Connector (Rec) 8P Soldering Position.
SY-1005 Board
SY-1005 Board
Multi Connector
(Rec) 8P
(Rec) 8P
Solder Position
Solder Position
Assembly-3: Precaution During Speaker Installation.
Route the speaker harness as shown below.
Speaker
Harness
Harness
Rib