DOWNLOAD Sony DSC-W650 (serv.man2) Service Manual ↓ Size: 6.96 MB | Pages: 21 in PDF or view online for FREE

Model
DSC-W650 (serv.man2)
Pages
21
Size
6.96 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / LEVEL 2
File
dsc-w650-sm2.pdf
Date
PREV: Sony DSC-W650 Service Manual

Sony DSC-W650 (serv.man2) Service Manual ▷ View online

DSC-W650_L2
3-1E
3. ASSEMBLY
Assembly-1: Installation Methode of Battery Terminal Board.
Fold the notch 3 or 4 times repeatedly to break.
Remove the notch.
Solder the battery terminal board on the SY-310
Board.
* Battery terminal board is attached with
  notch for  installation.
Remove the battery terminal board by 
bending the claw of rock portion.
When assembling the battery terminal board, 
replace it with new one because battery
terminal board will be bent.
Notch
Solder Position
(reflow soldering )
Notch
SY-310 Board
Battery terminal board
Notch
Battery terminal
board
Assembly-2: Multi Connector (Rec) 8P Soldering Position.
Multi Connector (Rec) 8P
Solder Position
Solder Position
Guide Line
SY-310 Board
SY-310 Board
Assembly-3: Precaution During Speaker Installation.
Speaker
Harness
Rib
Route the speaker harness as shown below.
Assembly-4: Installation Cautions Method of LCD Cushion 
(620) and LCD Window (620).
Apply LCD cushion (620).
And have the Tab of the Release Paper and peel it off.
Attach Cabinet (Rear) Assy to set.
Fit LCD Window (620) into the flame of Cabinet (Rear)
Assy and attach it on LCD Cushion (620).
Tab
Release
Paper
Align corner of
LCD cushion (620)
with corner of LCD.
LCD Cushion (620)
LCD
Cabinet (Rear) Assy
Cabinet (Rear) Assy
LCD Window (620)
LCD Cushion (620)
Blow the air before attaching.
Be sure to keep away from dust.
DSC-W650_L2
3-1E
3. ASSEMBLY
Assembly-1: Installation Methode of Battery Terminal Board.
Fold the notch 3 or 4 times repeatedly to break.
Remove the notch.
Solder the battery terminal board on the SY-310
Board.
* Battery terminal board is attached with
  notch for  installation.
Remove the battery terminal board by 
bending the claw of rock portion.
When assembling the battery terminal board, 
replace it with new one because battery
terminal board will be bent.
Notch
Solder Position
(reflow soldering )
Notch
SY-310 Board
Battery terminal board
Notch
Battery terminal
board
Assembly-2: Multi Connector (Rec) 8P Soldering Position.
Multi Connector (Rec) 8P
Solder Position
Solder Position
Guide Line
SY-310 Board
SY-310 Board
Assembly-3: Precaution During Speaker Installation.
Speaker
Harness
Rib
Route the speaker harness as shown below.
Assembly-4: Installation Cautions Method of LCD Cushion 
(620) and LCD Window (620).
Apply LCD cushion (620).
And have the Tab of the Release Paper and peel it off.
Attach Cabinet (Rear) Assy to set.
Fit LCD Window (620) into the flame of Cabinet (Rear)
Assy and attach it on LCD Cushion (620).
Tab
Release
Paper
Align corner of
LCD cushion (620)
with corner of LCD.
LCD Cushion (620)
LCD
Cabinet (Rear) Assy
Cabinet (Rear) Assy
LCD Window (620)
LCD Cushion (620)
Blow the air before attaching.
Be sure to keep away from dust.
DSC-W650_L2
3-1E
3. ASSEMBLY
Assembly-1: Installation Methode of Battery Terminal Board.
Fold the notch 3 or 4 times repeatedly to break.
Remove the notch.
Solder the battery terminal board on the SY-310
Board.
* Battery terminal board is attached with
  notch for  installation.
Remove the battery terminal board by 
bending the claw of rock portion.
When assembling the battery terminal board, 
replace it with new one because battery
terminal board will be bent.
Notch
Solder Position
(reflow soldering )
Notch
SY-310 Board
Battery terminal board
Notch
Battery terminal
board
Assembly-2: Multi Connector (Rec) 8P Soldering Position.
Multi Connector (Rec) 8P
Solder Position
Solder Position
Guide Line
SY-310 Board
SY-310 Board
Assembly-3: Precaution During Speaker Installation.
Speaker
Harness
Rib
Route the speaker harness as shown below.
Assembly-4: Installation Cautions Method of LCD Cushion 
(620) and LCD Window (620).
Apply LCD cushion (620).
And have the Tab of the Release Paper and peel it off.
Attach Cabinet (Rear) Assy to set.
Fit LCD Window (620) into the flame of Cabinet (Rear)
Assy and attach it on LCD Cushion (620).
Tab
Release
Paper
Align corner of
LCD cushion (620)
with corner of LCD.
LCD Cushion (620)
LCD
Cabinet (Rear) Assy
Cabinet (Rear) Assy
LCD Window (620)
LCD Cushion (620)
Blow the air before attaching.
Be sure to keep away from dust.
DSC-W650_L2
3-1E
3. ASSEMBLY
Assembly-1: Installation Methode of Battery Terminal Board.
Fold the notch 3 or 4 times repeatedly to break.
Remove the notch.
Solder the battery terminal board on the SY-310
Board.
* Battery terminal board is attached with
  notch for  installation.
Remove the battery terminal board by 
bending the claw of rock portion.
When assembling the battery terminal board, 
replace it with new one because battery
terminal board will be bent.
Notch
Solder Position
(reflow soldering )
Notch
SY-310 Board
Battery terminal board
Notch
Battery terminal
board
Assembly-2: Multi Connector (Rec) 8P Soldering Position.
Multi Connector (Rec) 8P
Solder Position
Solder Position
Guide Line
SY-310 Board
SY-310 Board
Assembly-3: Precaution During Speaker Installation.
Speaker
Harness
Rib
Route the speaker harness as shown below.
Assembly-4: Installation Cautions Method of LCD Cushion 
(620) and LCD Window (620).
Apply LCD cushion (620).
And have the Tab of the Release Paper and peel it off.
Attach Cabinet (Rear) Assy to set.
Fit LCD Window (620) into the flame of Cabinet (Rear)
Assy and attach it on LCD Cushion (620).
Tab
Release
Paper
Align corner of
LCD cushion (620)
with corner of LCD.
LCD Cushion (620)
LCD
Cabinet (Rear) Assy
Cabinet (Rear) Assy
LCD Window (620)
LCD Cushion (620)
Blow the air before attaching.
Be sure to keep away from dust.
Page of 21
Display

Sony DSC-W650 (serv.man2) Service Manual ▷ Download

Found More:

DSC-W650 (serv.man2) Service Manuals

Preview DownloadPagesSize
DSC-W650 LEVEL 3 Service Manual 25 1.82 MB
DSC-W650 (serv.man3) ADJUSTMENT MANUAL Service Manual 1 49.06 KB

RANDOM: