Sony DSC-W550 (serv.man2) Service Manual ▷ View online
DSC-W550_L2
1-1
1. SERVICE NOTE
1-1. PRECAUTION ON REPLACING THE SY-284 BOARD
DESTINATION DATA
When you replace to the repairing board, the written destination data of repairing board also might be changed to original setting.
Start the Adjust Manual in the Adjust Station and execute the “DESTINATION DATA WRITE”.
Start the Adjust Manual in the Adjust Station and execute the “DESTINATION DATA WRITE”.
RESTORE DATA
When you replace to the repairing board, get the data from the former one.
Start the Adjust Manual in the Adjust Station and perform “RESTORE DATA” to get the data.
The data getting for this model is as follows.
Start the Adjust Manual in the Adjust Station and perform “RESTORE DATA” to get the data.
The data getting for this model is as follows.
• USB SERIAL No.
• AWB standard data input & check, Color reproduction check
• AWB standard data input & check, Color reproduction check
Note: When you cannot read data from the former replace the same time SY-284 board and lens.
Regarding the PMB Portable
PMB Portable has been written in internal memory.
SY-284 board for service is supplied with written the PMB Portable.
SY-284 board for service is supplied with written the PMB Portable.
USB SERIAL No.
The set is shipped with a unique ID (USB Serial No.) written in it.
This ID has not been written in a new board for service, and therefore it must be entered after the board replacement.
Start the Adjust Manual in the Adjust Station and execute the “USB SERIAL No. INPUT”.
This ID has not been written in a new board for service, and therefore it must be entered after the board replacement.
Start the Adjust Manual in the Adjust Station and execute the “USB SERIAL No. INPUT”.
– ENGLISH –
1-2. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
The data can be copied/erased by the operations on the HOME screen. (When erasing the data, execute formatting the internal memory.)
Note 1:When replacing the SY-284 board, erase the data in internal memory of the board before replacement.
Note 2:When replacing the SY-284 board, execute formatting and initialize the internal memory after replacement.
Note 2:When replacing the SY-284 board, execute formatting and initialize the internal memory after replacement.
Method for Copying the Data in Internal Memory
Copy
Copies all images in the internal memory to a memory card.
1. Insert a memory card with sufficient free capacity into the camera.
2. MENU
2. MENU
(Settings)
(Memory Card Tool)
[Copy]
[OK]
Notes
Use a fully charged battery pack. If you attempt to copy image files using a battery pack with
little remaining charge, the battery pack may run out, causing copying to fail or possibly
corrupting the data.
Images cannot be copied individually.
The original images in the internal memory are retained even after copying. To delete the
contents of the internal memory, remove the memory card after copying, then format the
internal memory ([Format] in [Internal Memory Tool]).
A new folder is created on the memory card and all the data will be copied to it. You cannot
choose a specific folder and copy images to it.
little remaining charge, the battery pack may run out, causing copying to fail or possibly
corrupting the data.
Images cannot be copied individually.
The original images in the internal memory are retained even after copying. To delete the
contents of the internal memory, remove the memory card after copying, then format the
internal memory ([Format] in [Internal Memory Tool]).
A new folder is created on the memory card and all the data will be copied to it. You cannot
choose a specific folder and copy images to it.
Method for Formatting the Internal Memory or “Memory Stick Duo” media
Format
Formats the memory card or the internal memory. When you use a memory card with this
camera for the first time, it is recommended to format the card using the camera for stable
performance of the memory card before shooting. Note that formatting permanently erases all
data on the memory card, and is unrecoverable. Save precious data on a computer, etc.
camera for the first time, it is recommended to format the card using the camera for stable
performance of the memory card before shooting. Note that formatting permanently erases all
data on the memory card, and is unrecoverable. Save precious data on a computer, etc.
1. MENU
(Settings)
(Memory Card Tool) or
(Internal Memory Tool)
[Format]
[OK]
Note
Note that formatting permanently erases all data including even protected images.
DSC-W550_L2
1-2
– ENGLISH –
1-3. HOW TO WRITE DATA TO INTERNAL MEMORY
Usually, the camera has been set so as to disable the data writing from the PC to the internal memory of the camera.
This setting must be changed temporarily when the data is to be written to the internal memory such as a case after the board replacement.
To change settings is enabled with using the writing enabler tool (Write Enable Tool) on the Adjust Manual is activating from the Adjust Station.
This setting must be changed temporarily when the data is to be written to the internal memory such as a case after the board replacement.
To change settings is enabled with using the writing enabler tool (Write Enable Tool) on the Adjust Manual is activating from the Adjust Station.
Data writing method
1) Start the Adjust Manual from the Adjust Station.
2) Click
(Write Enable Tool) button.
3) Click “Activate Write Enable Mode” button.
4) Upon completion of the setting change, the following message will be displayed.
5) Return the driver to the original one, and connect the PC to the camera (USB mode: Mass Storage).
Perform the following procedure at the method order 5) when using [Write Enable Tool].
1. Disconnect the USB cable from the camera.
2. Remove the Adjustment mode setting MS from the camera.
3. Insert a Memory Stick (except Adjustment mode setting MS) into the camera, and then remove it.
4. Reconnect the USB cable to the camera so that the camera is connected in the Mass-Storage mode.
6) Write the data read out into the PC to the internal memory of the camera.
7) Disconnect the PC from the camera, and turn off the camera.
7) Disconnect the PC from the camera, and turn off the camera.
Note: By turning off the camera, the write enable setting is reset.
1-4. POWER SUPPLY ON REPAIRING
Use the battery (NP-BN1) on repairing.
The external battery source cannot be used on repairing.
The external battery source cannot be used on repairing.
1-5. SELF-DIAGNOSIS FUNCTION
1-5-1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis func-
tion starts working, and displays on the LCD screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
tion starts working, and displays on the LCD screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
1-5-2. Self-diagnosis Display
When problems occur while the unit is operating, the LCD screen shows
a 4-digit display consisting of an alphabet and numbers, which blinks at
3.2 Hz. This 5-character display indicates the “repaired by:”, “block” in
which the problem occurred, and “detailed code” of the problem.
a 4-digit display consisting of an alphabet and numbers, which blinks at
3.2 Hz. This 5-character display indicates the “repaired by:”, “block” in
which the problem occurred, and “detailed code” of the problem.
0 0
3 2
C
Repaired by:
Refer to “1-5-3. Self-diagnosis Code Tabl e”.
Indicates the appropriate
step to be taken.
E.g.
13 ....
32 ....Turn on power again.
13 ....
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2 Hz
C : Corrected by customer
E : Corrected by service
engineer
LCD screen
Format the “memory card”.
0 0
3 2
C
Repaired by:
Refer to “1-5-3. Self-diagnosis Code Tabl e”.
Indicates the appropriate
step to be taken.
E.g.
13 ....
32 ....Turn on power again.
13 ....
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2 Hz
C : Corrected by customer
E : Corrected by service
engineer
LCD screen
Format the “memory card”.
DSC-W550_L2
1-3
– ENGLISH –
1-6. PROCESS AFTER FIXING FLASH ERROR
When “FLASH error” (Self-diagnosis Code E : 91 : 01) occurs, to prevent any abnormal situation caused by high voltage, setting of the flash is changed
automatically to disabling charge and flash setting.
After fixing, this setting needs to be deactivated. Flash error code can be initialized by the operations on the HOME screen.
automatically to disabling charge and flash setting.
After fixing, this setting needs to be deactivated. Flash error code can be initialized by the operations on the HOME screen.
Method for Initializing the Flash Error Code
Initialize
Initializes the setting to the default setting.
Even if you execute this function, the images are retained.
Even if you execute this function, the images are retained.
1. MENU
(Settings)
(Main Settings)
[Initialize]
[OK]
Note
Be sure not to turn off the camera while initializing.
1-7. Dedicated A/V cable (optional accessory)
Dedicated A/V cable is not supplied with this model.
For details of the dedicated A/V cable, refer to the "Checking supplied accessories" page.
For details of the dedicated A/V cable, refer to the "Checking supplied accessories" page.
1-5-3. Self-diagnosis Code Table
Self-diagnosis Code
Symptom/State
Correction
Repaired by:
Block
Function
Detailed
Code
C
1
3
0
1
The internal memory has experienced a me-
dia error.
dia error.
Turn the power off and on again.
The internal memory has experienced a for-
mat error.
mat error.
Format the internal memory.
Memory card is unformatted.
Format the memory card.
Memory card is broken.
Insert a new memory card.
Memory card type error
Insert a supported memory card.
The camera cannot read or write data on the
memory card.
memory card.
Turn the power off and on again, or taking out and inserting the memory
card several times.
card several times.
C
3
2
0
1
Trouble with hardware
Turn the power off and on again.
E
6
1
0
0
Difficult to adjust focus
(Cannot initialize focus)
(Cannot initialize focus)
Retry turn the power on by the power switch. If it does not recover,
check the focus reset sensor of lens block (pin qh of CN401 on the
SY-284 board). If it is OK, check the focus motor drive IC (IC401 on
the SY-284 board).
check the focus reset sensor of lens block (pin qh of CN401 on the
SY-284 board). If it is OK, check the focus motor drive IC (IC401 on
the SY-284 board).
E
9
1
0
1
Abnormality when flash is being charged.
Checking of flash unit or replacement of flash unit. (Note)
Note: After repair, be sure to perform “1-6. PROCESS AFTER FIXING FLASH ERROR”.
DSC-W550_L2
1-4
1-1. SY-284基板交換時の注意
仕向けデータ
補修用基板と交換する時，補修用基板に書かれている仕向けデータは元の設定と違っている場合があります。
Adjust StationからAdjust Manualを起動させて「DESTINATION DATA WRITE」を実行させてください。
Adjust StationからAdjust Manualを起動させて「DESTINATION DATA WRITE」を実行させてください。
リストアデータ
補修用基板と交換する時，交換前の基板よりデータを取得してください。
データの取得はAdjust StationからAdjust Manualを起動させて「RESTORE DATA」を実行させてください。
本機で取得されるデータは下記になります。
データの取得はAdjust StationからAdjust Manualを起動させて「RESTORE DATA」を実行させてください。
本機で取得されるデータは下記になります。
･ USB SERIAL No.
･ AWB standard data input & check, Color reproduction check
･ AWB standard data input & check, Color reproduction check
Note：交換前の基板よりデータが読み取れない場合は，SY-284基板とレンズを同時に交換する必要があります。
PMB Portableについて
本機の内蔵メモリー内にはPMB Portableが書き込まれています。
補修用SY-284基板は，PMB Portableが書き込まれた状態で供給されます。
補修用SY-284基板は，PMB Portableが書き込まれた状態で供給されます。
USBシリアルNo.
セットは，1台毎に異なる固有のID（USB Serial No.）を書き込んだ後，出荷されています。
新品の補修用基板には，このIDが書き込まれていないので，基板交換後にIDを入力する必要があります。
Adjust StationからAdjust Manualを起動させて「USB SERIAL No. INPUT」を実行させてください。
新品の補修用基板には，このIDが書き込まれていないので，基板交換後にIDを入力する必要があります。
Adjust StationからAdjust Manualを起動させて「USB SERIAL No. INPUT」を実行させてください。
– JAPANESE –
1-2. 内蔵メモリーのデータコピーおよび消去方法
内蔵メモリーのデータコピーまたは消去はホーム画面の操作から実行可能です。
（消去する場合は内蔵メモリーの初期化を行います。）
Note1：SY-284基板交換の際は，基板交換前に内蔵メモリーのデータを消去して下さい。
Note2：SY-284基板交換の際は，基板交換後に内蔵メモリーのフォーマットおよび初期化を実行して下さい。
Note2：SY-284基板交換の際は，基板交換後に内蔵メモリーのフォーマットおよび初期化を実行して下さい。
内蔵メモリーのコピー方法
॥আش
ওঔজشप੶ஈखञ൸ؚ॑ওঔজشढ़شॻपฐ॥আشखऽघ؛
ౄীऩ૬ऌઍभँॊওঔজشढ़شॻ॑মਃपোोॊ
0(18
0(18
قਝك
قওঔজشढ़شॻॶشঝك
ن॥আشه
ن2.ه
র
ఙभ
ओିਔ
ౄীपౄਗ਼खञংॵॸজش॑ओઞ৷ऎटऔः؛ଋभऩःংॵॸজش॑ઞ৷खथ൸ই॓
ॖঝ॑॥আشघॊधؚংॵॸজشજोभञीॹشॱ॑ૡଛदऌऩऊढञॉؚॹشॱ॑घ
ॊउजोऋँॉऽघ؛
൸ओधभ॥আشमदऌऽच॒؛
ॹشॱ॑॥আشखथुؚওঔজشभॹشॱमచऔोऽच॒؛ওঔজشभઍ॑
ுघॊपमؚ॥আشपওঔজشढ़شॻ॑ম৬ऊैॉमङखؚنওঔজشॶشঝه
भنইज़شঐॵॺه॑ষढथऎटऔः؛
ॹشॱ॑॥আشघॊधওঔজشढ़شॻपৗखःইज़ঝॲऋਛऔोऽघ؛॥আشभইज़
ঝॲ॑घॊऒधमदऌऽच॒؛
ॖঝ॑॥আشघॊधؚংॵॸজشજोभञीॹشॱ॑ૡଛदऌऩऊढञॉؚॹشॱ॑घ
ॊउजोऋँॉऽघ؛
൸ओधभ॥আشमदऌऽच॒؛
ॹشॱ॑॥আشखथुؚওঔজشभॹشॱमచऔोऽच॒؛ওঔজشभઍ॑
ுघॊपमؚ॥আشपওঔজشढ़شॻ॑ম৬ऊैॉमङखؚنওঔজشॶشঝه
भنইज़شঐॵॺه॑ষढथऎटऔः؛
ॹشॱ॑॥আشघॊधওঔজشढ़شॻपৗखःইज़ঝॲऋਛऔोऽघ؛॥আشभইज़
ঝॲ॑घॊऒधमदऌऽच॒؛
内蔵メモリー、もしくはメモリーカードのフォーマット方法
ইज़شঐॵॺ
ওঔজشढ़شॻؚऽञमওঔজش॑ইज़شঐॵॺقੂ৲كखऽघ؛
ওঔজشढ़شॻभ॑औचॊञीपؚওঔজشढ़شॻ॑মਃदमगीथउઞःपऩॊৃ়
पमؚऽङؚমਃदইज़شঐॵॺघॊऒध॑उघघीखऽघ؛ইज़شঐॵॺघॊधؚওঔজش
ढ़شॻप੶ஈऔोथःॊ৸थभॹشॱमுऔोؚ੪पರघऒधमदऌऽच॒؛পજऩॹشॱम
ঃ९॥থऩनप৳ோखथउःथऎटऔः؛
ওঔজشढ़شॻभ॑औचॊञीपؚওঔজشढ़شॻ॑মਃदमगीथउઞःपऩॊৃ়
पमؚऽङؚমਃदইज़شঐॵॺघॊऒध॑उघघीखऽघ؛ইज़شঐॵॺघॊधؚওঔজش
ढ़شॻप੶ஈऔोथःॊ৸थभॹشॱमுऔोؚ੪पರघऒधमदऌऽच॒؛পજऩॹشॱम
ঃ९॥থऩनप৳ோखथउःथऎटऔः؛
0(18
قਝك
قওঔজشढ़شॻॶشঝكؚऽञम قওঔজشॶش
ঝك
نইज़شঐॵॺه
ن2.ه
রఙभ
ओିਔ
ইज़شঐॵॺघॊधؚউটॸॡॺखथँॊ൸ुஅीथؚघसथभॹشॱऋுऔोؚ੪प
ರचऽच॒؛
ರचऽच॒؛
Ver. 1.1 2011.08
