Sony DSC-W550 (serv.man2) Service Manual ▷ View online
DSC-W550_L2
2-6
2-1-4. LENS BLOCK SECTION
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
151
8-848-862-01
DEVICE, LENS LSV-1380B (Note 1, 2)
152
4-155-850-01
RING A (S), ORNAMENTAL
153
4-147-109-01 TAPE,
BARRIER
154
A-1743-714-A BARRIER
ASSY
155
4-147-091-01
FRAME, 1 GROUP
156
A-1743-728-A CAM
TUBE
BLOCK
ASSY
157
A-1743-727-A STRAIGHT
TUBE
LUBRICATED
ASSY
158
1-787-874-11 STEPPING
MOTOR,
OPTICAL(F1380)
159
4-147-113-01 SEAL,
FG
160
A-1743-730-A WORM B LUBRICATED ASSY
161
A-1743-731-A NARUTO GEAR LUBRICATED ASSY
162
A-1743-725-A DC MOTOR WORM A ASSY
163
A-1798-783-A CD-774 BOARD, COMPLETE
(including IC001 (CCD imager)) (Note 3)
#30
3-086-156-11 SCREW
B1.2
#176 3-947-504-31 SCREW
(M1.2)
1. The meaning of the sign in left figure is as follows. Be careful when it removes.
◇-X
: Solder
DISASSEMBLY
#30
#30
#30
#176
151
(Note 1, 2)
(Note 3)
152
ns
ns
ns
ns
ns
ns
ns
158
153
153
154
155
156
157
160
159
161
162
163
(including IC001
(CCD imager))
(CCD imager))
Note
Note 1:
Hold the Lens Block at the
center of both sides.
center of both sides.
Do not hold the following part.
Hold here.
Lens Flexible Board
PRECAUTIONS WHEN HOLDING THE LENS BLOCK
Screw
#176: M1.2 X 2.0
(Silver)
3-947-504-31
3-947-504-31
2.0
1.2
#30: M1.2 X 3.5 (Tapping)
(White)
3-086-156-11
3-086-156-11
3.5
1.2
ns : not supplied
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.
Ver. 1.1 2011.08
Note 2: Refer to the following each item when you exchange parts of Lens Block.
• 1-8.
ORNAMENTAL RING A OR BARRIER ASSY REPLACING METHOD (page1-7)
• 1-9.
OPTICAL STEPPING MOTOR (F1380) REPLACING METHOD (page 1-7)
• 1-10. DC MOTOR WORM A ASSY REPLACING METHOD (page 1-8)
• 1-11. CAM TUBE BLOCK ASSY AND STRAIGHT TUBE LUBRICATED ASSY and
• 1-11. CAM TUBE BLOCK ASSY AND STRAIGHT TUBE LUBRICATED ASSY and
1 GROUP FRAME REPLACING METHOD (page 1-8)
• 1-12. FINAL INSPECTION (page 1-12)
Note 3: Be sure to read “Precautions for Replacement of Imager”
on page 6-1 of Level 3 when changing the imager.
Note 3: イメージャの交換時はLevel 3の6-1ページ、 イメージャ
交換時の注意 を必ずお読みください。
Note 2: レンズブロックの各部品を交換する際は，下記の各項目を参照してください。
• 1-8.
• 1-8.
ORNAMENTAL RING A OR BARRIER ASSY REPLACING METHOD (page1-7)
• 1-9.
OPTICAL STEPPING MOTOR (F1380) REPLACING METHOD (page 1-7)
• 1-10. DC MOTOR WORM A ASSY REPLACING METHOD (page 1-8)
• 1-11. CAM TUBE BLOCK ASSY and STRAIGHT TUBE LUBRICATED ASSY and
• 1-11. CAM TUBE BLOCK ASSY and STRAIGHT TUBE LUBRICATED ASSY and
1 GROUP FRAME REPLACING METHOD (page 1-8)
• 1-12. FINAL INSPECTION (page 1-12)
DSC-W550_L2
2-7E
Checking supplied accessories.
Conversion (2P) Adaptor
0 1-569-008-33
0 1-569-008-33
(E : NTSC)
Power cord (mains lead)
(EXCEPT US, CND, CH
(EXCEPT US, CND, CH
, J
)
0 1-837-421-11 (UK, E (Saudi), HK)
0 1-837-428-11 (KR)
0 1-837-427-11 (AEP, E (EXCEPT Saudi))
0 1-837-428-11 (KR)
0 1-837-427-11 (AEP, E (EXCEPT Saudi))
CD-ROM
(Cyber-shot application software /
“Cyber-shot User Guide”)
4-264-963-01
(Cyber-shot application software /
“Cyber-shot User Guide”)
4-264-963-01
Battery charger
(BC-CSN/BC-CSNB)
0 1-487-523-21 (US, CND)
(BC-CSN/BC-CSNB)
0 1-487-523-21 (US, CND)
0 1-487-523-51 (J)
0 1-487-523-61 (EXCEPT US, CND, CH
, J
)
Instruction Manual
• (Only for destination Japanese model)
日本語・英語・韓国語・中国語のみ部品供給可能です。
日本語・英語・韓国語・中国語のみ部品供給可能です。
4-295-904-01 (JAPANESE)
4-264-972-11 (ENGLISH)
4-264-972-11 (ENGLISH)
* 4-264-972-21 (ENGLISH, SPANISH)
* 4-264-972-31 (ENGLISH, FRENCH)
* 4-264-972-41 (ENGLISH, RUSSIAN, UKRAINIAN)
* 4-264-972-51 (ENGLISH, FRENCH, ITALIAN, SPANISH, PORTUGUESE,
* 4-264-972-31 (ENGLISH, FRENCH)
* 4-264-972-41 (ENGLISH, RUSSIAN, UKRAINIAN)
* 4-264-972-51 (ENGLISH, FRENCH, ITALIAN, SPANISH, PORTUGUESE,
GERMAN, DUTCH, TURKISH, GREEK, POLISH, CZECH,
HUNGARIAN, SLOVAK, SWEDISH, FINNISH, NORWEGIAN,
DANISH, CROATIAN, ROMANIAN)
HUNGARIAN, SLOVAK, SWEDISH, FINNISH, NORWEGIAN,
DANISH, CROATIAN, ROMANIAN)
* 4-264-972-61 (ENGLISH, SIMPLIFIED CHINESE, TRADITIONAL CHINESE,
MALAY, INDONESIAN, THAI, ARABIC, PERSIAN)
* 4-264-972-71 (ENGLISH, SPANISH, PORTUGUESE)
* 4-264-972-81 (ENGLISH, SIMPLIFIED CHINESE, TRADITIONAL CHINESE,
* 4-264-972-81 (ENGLISH, SIMPLIFIED CHINESE, TRADITIONAL CHINESE,
INDONESIAN, ARABIC, PERSIAN)
* 4-264-973-11 (ENGLISH, TRADITIONAL CHINESE, SIMPLIFIED CHINESE)
4-264-973-21 (KOREAN)
* 4-264-973-41 (ENGLISH, ARABIC, PERSIAN)
Rechargeable battery pack (NP-BN1)
(Note1)
(Note1)
Wrist strap
2-050-981-01 (Gray) (SILVER)
2-050-981-11 (Black) (BLACK)
2-050-981-01 (Gray) (SILVER)
2-050-981-11 (Black) (BLACK)
Dedicated USB cable
1-834-311-51
1-834-311-51
Note1 : This item is supplied with the unit as an accessory, but is
not prepared as a service part.
Cyber-shot User Guide (HTML)
* 4-258-990-01 (JAPANESE)
* 4-258-990-11 (ENGLISH)
* 4-258-990-21 (FRENCH)
* 4-258-990-31 (ITALIAN)
* 4-258-990-41 (SPANISH)
* 4-258-990-51 (PORTUGUESE)
* 4-258-990-61 (GERMAN)
* 4-258-990-71 (DUTCH)
* 4-258-990-81 (TRADITIONAL CHINESE)
* 4-258-990-91 (SIMPLIFIED CHINESE)
* 4-259-001-11 (RUSSIAN)
* 4-259-001-21 (ARABIC)
* 4-259-001-31 (PERSIAN)
* 4-259-001-41 (KOREAN)
* 4-259-001-51 (POLISH)
* 4-259-001-61 (CZECH)
* 4-258-990-11 (ENGLISH)
* 4-258-990-21 (FRENCH)
* 4-258-990-31 (ITALIAN)
* 4-258-990-41 (SPANISH)
* 4-258-990-51 (PORTUGUESE)
* 4-258-990-61 (GERMAN)
* 4-258-990-71 (DUTCH)
* 4-258-990-81 (TRADITIONAL CHINESE)
* 4-258-990-91 (SIMPLIFIED CHINESE)
* 4-259-001-11 (RUSSIAN)
* 4-259-001-21 (ARABIC)
* 4-259-001-31 (PERSIAN)
* 4-259-001-41 (KOREAN)
* 4-259-001-51 (POLISH)
* 4-259-001-61 (CZECH)
* 4-259-001-71 (HUNGARIAN)
* 4-259-001-81 (SLOVAK)
* 4-259-001-91 (SWEDISH)
* 4-259-002-11 (FINNISH)
* 4-259-002-21 (NORWEGIAN)
* 4-259-002-31 (DANISH)
* 4-259-002-41 (THAI)
* 4-259-002-51 (MALAY)
* 4-259-002-61 (TURKISH)
* 4-259-002-71 (GREEK)
* 4-259-002-81 (UKRAINIAN)
* 4-259-002-91 (CROATIAN)
* 4-259-003-11 (ROMANIAN)
* 4-259-003-21 (INDONESIAN)
* 4-259-003-31 (BRAZILIAN PORTUGUESE)
* 4-259-001-81 (SLOVAK)
* 4-259-001-91 (SWEDISH)
* 4-259-002-11 (FINNISH)
* 4-259-002-21 (NORWEGIAN)
* 4-259-002-31 (DANISH)
* 4-259-002-41 (THAI)
* 4-259-002-51 (MALAY)
* 4-259-002-61 (TURKISH)
* 4-259-002-71 (GREEK)
* 4-259-002-81 (UKRAINIAN)
* 4-259-002-91 (CROATIAN)
* 4-259-003-11 (ROMANIAN)
* 4-259-003-21 (INDONESIAN)
* 4-259-003-31 (BRAZILIAN PORTUGUESE)
About Cyber-shot User Guide (HTML)
This CD-ROM is provided in HTML.
Therefore, it is suitable for browsing on the PC, but is not suitable for printing.
Therefore, it is suitable for browsing on the PC, but is not suitable for printing.
The printed matter is not supplied.
The following lists part numbers of languages.
The following lists part numbers of languages.
The CD-ROM supplied contains all of language version.
Note2: Dedicated A/V cable (optional accessory)
Dedicated A/V cable is not supplied with this model.
If you need dedicated A/V cable, order 1-834-312-4□
If you need dedicated A/V cable, order 1-834-312-4□
or VMC-15CSR1.
The changed portions from
Ver. 1.1 are shown in blue.
Ver. 1.1 are shown in blue.
Ver. 1.2 2012.05
DSC-W550_L2
3-1E
3. ASSEMBLY
Assembly-1: Installation Method of Battery Terminal Board
Insert the battery terminal board into a slit in
BT holder to install.
* Battery terminal board is attached with
BT holder to install.
* Battery terminal board is attached with
notch for installation.
Remove the battery terminal board by
bending the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery ]
terminal board will be bent.
bending the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery ]
terminal board will be bent.
Fold the notch 3 or 4 times repeatedly to break.
Remove the notch.
Notch
Battery terminal board
Battery terminal board
Notch
Battery terminal
board
board
Notch
Assembly-2: Insulating Sheet (670) Putting Position
SY-284
Insulating Sheet (670)
SY-284 Board
Insulating Sheet (670)
Assembly-3: Precaution During of MA-473 Flexible Board
Installation.
Speaker
Harness
Harness
Tape SP
Route the speaker harness and microphone
harness as shown below.
harness as shown below.
Microphone
Harness
Harness
Microphone
Harness
Harness
MA-473 Flexible
Board
Board
MA-473 Flexible
Board
Board
Assembly-4: Precaution During of Cabinet (Rear) Assy
Installation.
Align the slide switch at the camera mode,
when install cabinet (rear) assy.
when install cabinet (rear) assy.
Slide Switch
Cabinet (Rear) Assy
Assembly-5: Attaching Method of LCD Cushion (710),
LCD Window (620)
Apply LCD cushion (620).
And have the Tab of the Release Paper and peel it off.
And have the Tab of the Release Paper and peel it off.
Attach Cabinet (Rear) Assy to set.
Cabinet (Rear) Assy
Mike Lid (710)
Fit LCD Window (620) into the flame of
Cabinet (Rear) Assy and attach it on LCD Cushion (710).
Cabinet (Rear) Assy and attach it on LCD Cushion (710).
LCD Cushion (710)
LCD Window (620)
Rear Cabinet Assy
Blow the air before attaching.
Be sure to keep away from dust.
Be sure to keep away from dust.
Align corner of
LCD cushion (710)
with corner of LCD.
LCD cushion (710)
with corner of LCD.
LCD Cushion (710)
LCD
Tab
Release Paper
DSC-W550_L2
3-1E
3. ASSEMBLY
Assembly-1: Installation Method of Battery Terminal Board
Insert the battery terminal board into a slit in
BT holder to install.
* Battery terminal board is attached with
BT holder to install.
* Battery terminal board is attached with
notch for installation.
Remove the battery terminal board by
bending the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery ]
terminal board will be bent.
bending the claw of rock portion.
When assembling the battery terminal board,
replace it with new one because battery ]
terminal board will be bent.
Fold the notch 3 or 4 times repeatedly to break.
Remove the notch.
Notch
Battery terminal board
Battery terminal board
Notch
Battery terminal
board
board
Notch
Assembly-2: Insulating Sheet (670) Putting Position
SY-284
Insulating Sheet (670)
SY-284 Board
Insulating Sheet (670)
Assembly-3: Precaution During of MA-473 Flexible Board
Installation.
Speaker
Harness
Harness
Tape SP
Route the speaker harness and microphone
harness as shown below.
harness as shown below.
Microphone
Harness
Harness
Microphone
Harness
Harness
MA-473 Flexible
Board
Board
MA-473 Flexible
Board
Board
Assembly-4: Precaution During of Cabinet (Rear) Assy
Installation.
Align the slide switch at the camera mode,
when install cabinet (rear) assy.
when install cabinet (rear) assy.
Slide Switch
Cabinet (Rear) Assy
Assembly-5: Attaching Method of LCD Cushion (710),
LCD Window (620)
Apply LCD cushion (620).
And have the Tab of the Release Paper and peel it off.
And have the Tab of the Release Paper and peel it off.
Attach Cabinet (Rear) Assy to set.
Cabinet (Rear) Assy
Mike Lid (710)
Fit LCD Window (620) into the flame of
Cabinet (Rear) Assy and attach it on LCD Cushion (710).
Cabinet (Rear) Assy and attach it on LCD Cushion (710).
LCD Cushion (710)
LCD Window (620)
Rear Cabinet Assy
Blow the air before attaching.
Be sure to keep away from dust.
Be sure to keep away from dust.
Align corner of
LCD cushion (710)
with corner of LCD.
LCD cushion (710)
with corner of LCD.
LCD Cushion (710)
LCD
Tab
Release Paper
