Sony DSC-W35 (serv.man15) Service Manual ▷ View online
SEÇÃO 6
AJUSTES
Revision History
Revision History
Sony EMCS Co. - Sony Brasil Ltda.
Auto-ADJ
Ver. 1.0 2007.01
9-
890-091-51
2007A0500-1
© 2007.1
Publicado por Sony Brasil Ltda.- Engenharia de Qualidade
DSC-W35
DSC-W35_ADJ
Link
Link
Lista de ferramentas de serviço
ITENS DOS AJUSTES QUANDO TROCAR AS PLACAS E PRINCIPAIS PARTES
Antes de iniciar os ajustes
AJUSTE DE SISTEMA DO LCD
ERRO
AJUSTE DE SISTEMA DO VÍDEO
AJUSTE DE SISTEMA DA CÂMERA
PROGRAMAS DE AJUSTES
INICIALIZAÇÃO DOS DADOS
PREPARAÇÕES ANTES DOS AJUSTES
AJUSTES DA SEÇÃO DE CAMERA
MODO DE SERVIÇO
MODO DE SERVIÇO
• Use este Manual de Serviço junto com o Automatic Adjustment Program (DSC-W35 Auto-Adj
Ver_1.0r01.exe) e o AWB Adjustment Program (W35W55AwbAdjustment.exe).
• Precaução na substituição da placa SY-175
— 2 —
DSC-W35_ADJ
ÍNDICE
Section
Title
Page
6. AJUSTES
Before Starting Adjustments ····················································· 6-1
1-1.
1-1.
Adjusting Items When Replacing
Main Parts and Boards ···················································· 6-4
Main Parts and Boards ···················································· 6-4
1-2.
List of Service Tools ························································ 6-5
6-1.
Camera Section Adjustments ··········································· 6-6
1-1.
Preparations Before Adjustments ···································· 6-6
1-2.
Adjustment Programs ···················································· 6-10
1-3.
Video System Adjustments ············································ 6-12
1-4.
Camera System Adjustments ········································· 6-14
1-5.
LCD System Adjustments ············································· 6-22
1-6.
Error ··············································································· 6-24
1-7.
Initialization of Data ······················································ 6-26
6-2.
Service Mode ································································· 6-27
6-1
DSC-W35_ADJ
SEÇÃO 6
AJUSTES
Antes de iniciar os ajustes
Precaution on Replacing the SY-175 Board
• The Repair Board has already been adjusted. Re-initialization or EVR data copy from the set before repair is not
required.
• Perform “VIDEO OUT Default Data Check” and “Initial Language Data Check” mentioned below, and also the
adjustment items necessary after SY Board replacement.
VIDEO OUT Default Data Check
When you replace to the repairing board, the written data of repairing board also might be changed to original setting
because of broadcast system (NTSC/PAL).
When the data has changed because of board replacing etc., check the default data of VIDEO OUT if destination code is
right. If not, rewrite to the right value.
because of broadcast system (NTSC/PAL).
When the data has changed because of board replacing etc., check the default data of VIDEO OUT if destination code is
right. If not, rewrite to the right value.
VIDEO OUT Default Data
Writing Method:
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 4F, address: 8D, and set data: 00 (NTSC) or data: 01 (PAL).
3) Select page: 40, address: 38, and set data: 00.
4) Click [Save] on the SEUS screen.
5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 4F, address: 8D, and set data: 00 (NTSC) or data: 01 (PAL).
3) Select page: 40, address: 38, and set data: 00.
4) Click [Save] on the SEUS screen.
5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
Address
8D
Page
4F
Data
NTSC
00
PAL
01
6-2
DSC-W35_ADJ
Initial Language Data Check
If the SY-175 board was replaced, initial language setting may be changed. Accordingly, change the following data so
as to set same initial language as that of the set distributing in each region.
as to set same initial language as that of the set distributing in each region.
Initial language: Language displayed at the next starting if the setting of Setup menu was reset.
It is different from the language setting selectable with the menu.
Initial Language Data
Page
Address
Data
Language
GP1
GP2
GP3
GP4
4F
8C
00
English
z
z
z
01
Japanese
z
04
Spanish
z
z
06
Portugal
z
08
Simplified Chinese
z
0B
Russian
z
0D
Korean
z
Note:
GP1 is fixed to Japanese.
GP2 is fixed to English.
GP3 is either English, Spanish, or Russian.
GP4 is either English, Spanish, Portugal, Simplified Chinese, or Korean.
GP2 is fixed to English.
GP3 is either English, Spanish, or Russian.
GP4 is either English, Spanish, Portugal, Simplified Chinese, or Korean.
Writing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 8C, and set the Initial Language Data.
3) Select page: 40, address: 38, and set data: 00.
4) Click [Save] on the SEUS screen.
5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
8) Turn off the camera.
9) Turn on the camera. Execute “Initialize” of Setup screen.
10) Check the language displayed when the camera starts.
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 8C, and set the Initial Language Data.
3) Select page: 40, address: 38, and set data: 00.
4) Click [Save] on the SEUS screen.
5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
8) Turn off the camera.
9) Turn on the camera. Execute “Initialize” of Setup screen.
10) Check the language displayed when the camera starts.