Sony DSC-W310 Service Manual ▷ View online
DSC-W310
2-1
(ENGLISH)
NOTE:
• -XX, -X mean standardized parts, so they may have some differences from the original one.
• Items marked “*” are not stocked since they are seldom required for routine service. Some
delay should be anticipated when ordering these items.
• The mechanical parts with no reference number in the exploded views are not supplied.
• Due to standardization, replacements in the parts list may be different from the parts speci-
fied in the diagrams or the components used on the set.
2. REPAIR PARTS LIST
Follow the disassembly in the numerical order given.
• Color Indication of Appearance Parts
Example:
(SILVER) : Cabinet’s Color
(Silver) : Parts Color
The components identified by mark 0 or
dotted line with mark are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque
Les composants identifiés par une marque
0
sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
le numéro spécifié.
ACCESSORIES
IDENTIFYING PARTS
Link
ACCESSORIES
View Position
When indicating parts by reference
number,please include the board name.
DISCHARGING OF THE CHARGING CAPACITOR
Bottom View
Bottom View
Top View
Top View
Back View
Back View
Front View
Right View
Right View
Left View
Left View
• Abbreviation
AR : Argentine model
AUS : Australian model
BR : Brazilian model
CH : Chinese model
CND : Canadian model
HK : Hong Kong model
KR : Korea model
5
Cabinet (Front) Assy
2
Cabinet (Left) Assy
3
DC Door
1
Cabinet (Rear) Assy
4
Cabinet (Right)
7
TOP Cover Assy
qd
BT Lid
8
SW Board
9
LCD Module
0
Stroboscope Assy
qa
Lens Block Assy
[Disassembly]
[Exploded View]
qs
Main Board
qf
Frame Assy
DSC-W310
2-2
The charging capacitor is charged up to the maximum 310 V po-
tential.
There is a danger of electric shock by this high voltage when the
capacitor is handled by hand. The electric shock is caused by the
charged voltage which is kept without discharging when the main
power of the unit is simply turned off. Therefore, the remaining
voltage must be discharged as described below.
Preparing the Short Jig
To preparing the short jig, a small clip is attached to each end of a
resistor of 1 kΩ /1 W (1-215-869-11).
Wrap insulating tape fully around the leads of the resistor to prevent
electrical shock.
DISCHARGING OF THE CHARGING CAPACITOR
NOTE FOR REPAIR
• Make sure that the flat cable and flexible board are not cracked of
bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
• When remove a connector, don’t pull at wire of connector. It is pos-
sible that a wire is snapped.
• When installing a connector, don’t press down at wire of connector.
It is possible that a wire is snapped.
• Do not apply excessive load to the gilded flexible board.
Cut and remove the part of gilt
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
Wrap insulating tape.
R:1 k /1 W
(Part code: 1-215-869-11)
Stroboscope Assy
Note:
Note:
High-voltage cautions
High-voltage cautions
Discharging the Capacitor
Short-circuit between the two points with the
short jig about 10 seconds.
To avoid the spark with the metal plate,
wrap the short jig with the insulation tape.
Short-circuit between the two points with the
short jig about 10 seconds.
To avoid the spark with the metal plate,
wrap the short jig with the insulation tape.
DSC-W310
2-3
2-1. EXPLODED VIEWS
2-1-1. OVERALL SECTION
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
DISASSEMBLY
1
X-2547-495-1 CABINET (LEFT) ASSY (S) (SILVER)
1
X-2547-496-1 CABINET (LEFT) ASSY (B) (BLACK)
1
X-2547-497-1 CABINET (LEFT) ASSY (P) (PINK)
2
4-182-738-01 DC DOOR (B) (SILVER / BLACK)
2
4-182-739-01 DC DOOR (BROWN) (PINK)
3
X-2547-493-1 CABINET (REAR) ASSY (B) (SILVER / BLACK)
3
X-2547-494-1 CABINET (REAR) ASSY (BROWN) (PINK)
4
4-182-740-01 CABINET (RIGHT) (S) (SILVER)
4
4-182-741-01 CABINET (RIGHT) (B) (BLACK)
4
4-182-742-01 CABINET (RIGHT) (P) (PINK)
#S1
3-299-366-01 SCREW_TP_1.7_3.5_A_0.3_D=2.5 (Note)
#S2
4-182-736-01 SCREW_TP_1.7_3.5_A0.3_D2.5_BLK (Note)
#S3
3-113-005-01 SCREW TP 1.7*3
1
#S1 / #S2 X 3 → USB Cover Open (
1
) → #S3 X 1
2
#S3 X 1 → #S1 / #S2 X 1
1. Remove to numerical order (
1
to
4
) in the left figure.
Note
#S1
#S2
#S1
#S2
#S3
Left View
Right View
Bottom View
#S1
#S2
Left View
#S3
#S1
#S2
Bottom View
Note: THE COMBINATION OF CABINET’S COLOR AND SCREW
The screw pointed is different according to the cabinet's color.
For the combination of cabinet's color and screw, please refer
to Table 2-1.
Table 2-1
Screw's
Ref. No. (Parts Color.)
Cabinet's Color
#S1 (Silver)
SILVER
#S2 (Black)
BLACK, PINK
4
#S1 / #S2 X 2
LCD Section
(See page 2-4)
#S1
#S2
(Note)
#S3
1(Claw)
1�
3
2�
1
1(Claw)
3�
2
#S1
#S2
(Note)
#S1
#S2
(Note)
4�
4
4(Claw)
1
DSC-W310
2-4
Ref. No.
Part No.
Description
Description
Ref. No.
Part No.
Description
Description
2-1-2. LCD SECTION
DISASSEMBLY
51
X-2547-498-1
CABINET (FRONT) ASSY (S) (SILVER)
CABINET (FRONT) ASSY
CABINET (FRONT) ASSY
51
X-2547-499-1
CABINET (FRONT) ASSY (B) (BLACK)
CABINET (FRONT) ASSY
CABINET (FRONT) ASSY
51
X-2547-500-1
CABINET (FRONT) ASSY (P) (PINK)
CABINET (FRONT) ASSY
CABINET (FRONT) ASSY
52
X-2547-502-1
TOP COVER ASSY (S) (SILVER)
52
X-2547-503-1
TOP COVER ASSY (B) (BLACK)
52
X-2547-504-1
TOP COVER ASSY (P) (PINK)
53
A-1770-870-A SW BOARD, COMPLETE
54
1-811-083-11
LCD MODULE (LMS270GF10) (Note)
#S3
3-113-005-01
SCREW TP 1.7*3
#S4
4-182-743-01
SCREW_TP_1.7_2.5_A0.3_D2.5_BLK
#S5
3-277-534-01
TP_1.4_3.5_A0.3_D2.5_B
DISCHARGING OF THE CHARGING CAPACITOR
1. Remove to numerical order (
5
to
9
) in the left figure.
5
#S3 X 1
6
7
#S4 X 2
Note: When removing the LCD Module Flexible Board, turn over the
Main Board Mylar, then pull off the LCD Module Flexible Board.
Main Board
LCD Module
Flexible Board
Main Board Mylar
Note
Left View
#S3
#S4
#S4
Left View
Right View
Back View
#S5
8
#S5 X 1
#S5
8�
53
9�
54
(Note)
#S4
#S4
5(Claw)
7(Claw)
7�
52
#S3
5�
51
5(Claw)
6
Main Frame Section
(See page 2-5)
8(Claw)
Click on the first or last page to see other DSC-W310 service manuals if exist.