DOWNLOAD Sony DSC-W30 (serv.man3) Service Manual ↓ Size: 493.33 KB | Pages: 32 in PDF or view online for FREE

— 2 —

DSC-W30_ADJ

Section

Title

Page

Before Starting Adjustment ······················································· 6-1
1-1.

Adjusting Items When Replacing
Main Parts and Boards ···················································· 6-4

1-2.

List of Service Tools ························································ 6-5

6-1.

Camera Section Adjustments ··········································· 6-6

1-1.

Preparations Before Adjustments ···································· 6-6

1-2.

Adjustment Programs ···················································· 6-10

1-3.

Video System Adjustments ············································ 6-12

1-4.

Camera System Adjustments ········································· 6-14

1-5.

LCD System Adjustments ············································· 6-22

1-6.

Error ··············································································· 6-24

1-7.

Initialization of Data ······················································ 6-26

6-2.

Service Mode ································································· 6-27

6-1

DSC-W30_ADJ

• The Repair Board has already been adjusted. Re-initialization or EVR data copy from the set before repair is not

required.

• Perform “VIDEO OUT Default Data and Exif Model Data Check” and “Initial Language Data Check” mentioned

below, and also the adjustment items necessary after SY Board replacement.

When you replace to the repairing board, the written data of repairing board also might be changed to original setting.
When the data has changed because of board replacing etc., check the data setting (VIDEO OUT Default Data, Exif
Model Data) is right. If not, rewrite to the right value.

Writing Method:
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 4F, address: 8D, and set the VIDEO OUT Default Data.
3) Select page: 8F, address: E5 and E6, and set the Exif Model Data.
4) Click 

[Save]

 on the SEUS screen.

5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.

Address

8D

Page

4F

Data

NTSC

00

PAL

01

Address

E5

E6

Page

8F

8F

Data

DSC-W30

33

30

DSC-W40

34

30

6-2

DSC-W30_ADJ

If the SY-143 board was replaced, initial language setting may be changed. Accordingly, change the following data so
as to set same initial language as that of the set distributing in each region.

Initial language: Language displayed at the next starting if the setting of Setup menu was reset.

It is different from the language setting selectable with the menu.

Page

Address

Data

Language

GP1

GP2

GP3

GP4

4F

8C

00

English

z

z

z

01

Japanese

z

04

Spanish

z

z

06

Portugal

z

08

Simplified Chinese

z

0B

Russian

z

0D

Korean

z

GP1 is fixed to Japanese.
GP2 is fixed to English.
GP3 is either English, Spanish, or Russian.
GP4 is either English, Spanish, Portugal, Simplified Chinese, or Korean.

Writing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 8C, and set the Initial Language Data.
3) Select page: 40, address: 38, and set data: 00.
4) Click 

[Save]

 on the SEUS screen.

5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
8) Turn off the camera.
9) Turn on the camera. Execute “Initialize” of Setup screen.
10) Check the language displayed when the camera starts.

6-3

DSC-W30_ADJ

The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the
internal memory.)

When replacing the SY-143 board, erase the data in internal memory of the board before replacement.

When replacing the SY-143 board or the IC202 on the SY-143 board, execute formatting and initialize the
internal memory after replacement.

Copies all images in the internal memory to a “Memory Stick Duo”.

1 Insert a “Memory Stick Duo” having 32 MB or larger capacity.
2 Select [OK] with v on the control button, then press z.

The message “All data in internal memory will be copied Ready?” appears.

3 Select [OK] with v, then press z.

Copying starts. 

• Use a fully charged battery pack or the AC Adaptor (not supplied). If you attempt to copy image files 

using a battery pack with little remaining charge, the battery pack may run out, causing copying to fail or 
possibly corrupting the data.

• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the 

internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in 

(Internal Memory Tool).

• You cannot select a folder copied on a “Memory Stick Duo”.
• Even if you copy data, a 

 (Print order) mark is not copied.

OK

See the following procedure.

Cancel

Cancels the copying.

This item does not appear when a “Memory Stick Duo” is inserted in the camera.
The default settings are marked with 

.

Formats the internal memory.

• Note that formatting irrevocably erases all data in the internal memory, including even protected images.

1 Select [OK] with v on the control button, then press z.

The message “All data in internal memory will be erased Ready?” appears.

2 Select [OK] with v, then press z.

The format is complete.

OK

See the following procedure.

Cancel

Cancels the formatting.