DOWNLOAD Sony DSC-W200 (serv.man4) Service Manual ↓ Size: 851.72 KB | Pages: 40 in PDF or view online for FREE

2007I0500-1

© 2007.9

DSC-W200_ADJ

• Use this Service Manual together with the Automatic Adjustment Program (DSC-W200 Auto-Adj Ver_1.3r04.exe).

— 2 —

DSC-W200_ADJ

Before Starting Adjustments ····················································· 6-1
1-1.

Adjusting Items When Replacing
Main Parts and Boards ···················································· 6-3

1-2.

List of Service Tools ························································ 6-4

6-1.

Camera Section Adjustments ··········································· 6-6

1-1.

Preparations Before Adjustments ···································· 6-6

1-2.

Adjustment Program ······················································ 6-10

1-3.

Destination Data Write ·················································· 6-12

1-4.

USB Serial No. Input ····················································· 6-13

1-5.

Video System Adjustments ············································ 6-14

1-6.

Camera System Adjustments ········································· 6-17

1-7.

LCD System Adjustments ············································· 6-27

1-8.

Error ··············································································· 6-29

6-2.

Service Mode ································································· 6-31

2-1.

Application for Adjustment (SeusEX) ·························· 6-31

2-2.

Service Mode ································································· 6-32

2-3.

Data Backup ·································································· 6-37

Section

Title

Page

6-1

DSC-W200_ADJ

The data can be copied/erased by the operations on the HOME screen. (When erasing the data, execute formatting the
internal memory.)

Note: When replacing the SY-178 board, erase the data in internal memory of the board before replacement.

Copies all images in the internal memory to a “Memory Stick Duo”.

1

Insert a “Memory Stick Duo” having 32 MB or larger capacity.

2

Select [Copy] with v/V/b/B on the control button, then press z.
The message “All data in internal memory will be copied” appears.

3

Select [OK] with v, then press z.
Copying starts. 

Select [Cancel] in step 3, then press z.

• Use a fully charged battery pack. If you attempt to copy image files using a battery pack with little 

remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data.

• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the 

internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in 
[Internal Memory Tool].

• When you copy the data in the internal memory to the “Memory Stick Duo”, all the data will be copied. 

You cannot choose a specific folder on the “Memory Stick Duo” as the destination for the data to be 
copied.

• Even if you copy data, a 

 (Print order) mark is not copied.

This item does not appear when a “Memory Stick Duo” is inserted in the camera.

Formats the internal memory.

• Note that formatting irrevocably erases all data in the internal memory, including even protected images.

1

Select [Format] with v/V/b/B on the control button, then press z.
The message “All data in internal memory will be erased” appears.

2

Select [OK] with v, then press z.
The format is completed.

Select [Cancel] in step 2, then press z.

6-2

DSC-W200_ADJ

Usually, the camera has been set so as to disable the data writing from the PC to the internal memory of the camera.
This setting must be changed temporarily when the data is to be written to the internal memory such as a case after the
board replacement.
To change the setting, use the write enable tool “WriteEnableTool.exe”.

1) Connect the PC to the camera (USB mode: Mass Storage), and switch the driver to the “Sony Seus USB Driver”.
2) Start the Write Enable Tool and the SeusEX.
3) Click the [Activate Write Enable Mode] button of the Write Enable Tool.

4) Upon completion of the setting change, the following message will be displayed.

5) Return the driver to the original one, and connect the PC to the camera (USB mode: Mass Storage).
6) Write the data read out into the PC to the internal memory of the camera.
7) Disconnect the PC from the camera, and turn off the camera.

Note: By turning off the camera, the write enable setting is reset.