DSC-W1, DSC-W12 — Sony Digital Camera Service Manual (repair manual)

Model
DSC-W1 DSC-W12
Pages
33
Size
3.67 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / LEVEL 3
File
dsc-w1-dsc-w12.pdf
Date

View Sony DSC-W1 / DSC-W12 Service Manual online

DSC-W1/W12
SERVICE MANUAL
DIGITAL STILL CAMERA
LEVEL
 
3
Revision History
Revision History
Ver. 1.5  2007.11
Link
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SCHEMATIC DIAGRAMS
Link
How to use
Acrobat Reader
How to use
Acrobat Reader
Contents of LEVEL 2 Service Manual
1. SERVICE NOTE
2. DISASSEMBLY
3. BLOCK DIAGRAMS
OVERALL
POWER
4. PRINTED WIRING BOARDS AND
CD-507 FLEXIBLE,
SCHEMATIC DIAGRAMS
ST-100, ST-101 FLEXIBLE,
US-011 FLEXIBLE
5. REPAIR PARTS LIST
EXPLODED VIEWS
ELECTRICAL PARTS LIST
The information that is not described in this Service Manual is described
in the LEVEL 2 Service Manual.
When repairing, use this manual together with LEVEL 2 Service Manual.
• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (9-876-736-51).
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (9-876-736-41).
• This service manual contains information for Japanese model as well.
• Reference No. search on printed wiring boards is available.
• When the machine needs to be repaired, make sure to follow the item of “LCD TYPE CHECK”.
Photo: DSC-W1/Silver
DSC-W1
US Model
Canadian Model
Hong Kong Model
Australian Model
Argentine Model
Brazilian Model
Tourist Model
Japanese Model
DSC-W1/W12
AEP Model
UK Model
E Model
Chinese Model
Korea Model
Revised-1
Replace the previously issued
SERVICE MANUAL 9-876-736-11
with this manual.
— 2 —
DSC-W1/W12
TABLE OF CONTENTS
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-2.
Schematic Diagrams ························································ 4-5
CH-146 (CCD SIGNAL PROCESS) ······························ 4-9
SY-102 (1/6) (CAMERA MODULE) ··························· 4-11
SY-102 (2/6) (CAMERA DSP) ····································· 4-13
SY-102 (3/6) (LENS DRIVE) ······································· 4-15
SY-102 (4/6) (SH DSP) ················································· 4-17
SY-102 (5/6) (FRONT CONTROL) ······························ 4-19
SY-102 (6/6) (DC/DC CONVERTER) ·························· 4-21
SW-422 (AUDIO, CONTROL SWITCH) ····················· 4-23
JK-263 (JACK) ······························································ 4-25
SP-045 FLEXIBLE (SPEAKER) ·································· 4-25
MS-204 (1/2) (MS CONNECTOR) ······························ 4-25
MS-205 FLEXIBLE (CONNECTOR) ·························· 4-25
MS-204 (2/2) (LCD DRIVE) ········································ 4-27
4-3.
Printed Wiring Boards ··················································· 4-35
CH-146 ·········································································· 4-39
SY-102 ··········································································· 4-39
SW-422 ·········································································· 4-43
JK-263 ··········································································· 4-44
SP-045 FLEXIBLE ······················································· 4-44
MS-204 ·········································································· 4-45
MS-205 FLEXIBLE ······················································ 4-47
4-4.
Mounted Parts Location ················································ 4-54
5.
REPAIR  PARTS  LIST
5-2.
Electrical Parts List ························································· 5-7
Section
Title
Page
DSC-W1/W12
Link
Link
4-2.  SCHEMATIC DIAGRAMS
SY-102 BOARD (4/6) 
(SH DSP)
SY-102 BOARD (6/6) 
(DC/DC CONVERTER)
SY-102 BOARD (5/6) 
(FRONT CONTROL)
JK-263 BOARD 
(JACK)
SP-045 FLEXIBLE BOARD 
(SPEAKER)
MS-204 BOARD (2/2) 
(LCD DRIVE)
MS-204 BOARD (1/2) 
(MS CONNECTOR)
MS-205 FLEXIBLE BOARD 
(CONNECTOR)
SW-422 BOARD 
(AUDIO, CONTROL SWITCH)
SY-102 BOARD (2/6) 
(CAMERA DSP)
SY-102 BOARD (3/6) 
(LENS DRIVE)
CH-146 BOARD 
(CCD SIGNAL PROCESS)
SY-102 BOARD (1/6) 
(CAMERA MODULE)
SY-102 BOARD (4/6) 
(SH DSP)
SY-102 BOARD (6/6) 
(DC/DC CONVERTER)
SY-102 BOARD (5/6) 
(FRONT CONTROL)
JK-263 BOARD 
(JACK)
SP-045 FLEXIBLE BOARD 
(SPEAKER)
MS-204 BOARD (2/2) 
(LCD DRIVE)
MS-204 BOARD (1/2) 
(MS CONNECTOR)
MS-205 FLEXIBLE BOARD 
(CONNECTOR)
SW-422 BOARD 
(AUDIO, CONTROL SWITCH)
SY-102 BOARD (2/6) 
(CAMERA DSP)
SY-102 BOARD (3/6) 
(LENS DRIVE)
CH-146 BOARD 
(CCD SIGNAL PROCESS)
SY-102 BOARD (1/6) 
(CAMERA MODULE)
COMMON NOTE FOR SCHEMATIC DIAGRAMS
COMMON NOTE FOR SCHEMATIC DIAGRAMS
4-5
DSC-W1/W12
4-2. SCHEMATIC DIAGRAMS
4-2. SCHEMATIC DIAGRAMS
Link
(For schematic diagrams)
All capacitors are in 
µ
F unless otherwise noted. pF : 
µ
µ
F.  50 V or less are not indicated except for electrolytics
and tantalums.
Chip resistors are 1/10 W unless otherwise noted.
k
=1000 
, M
=1000 k
.
Caution when replacing chip parts.
New parts must be attached after removal of chip.
Be careful not to heat the minus side of tantalum
capacitor, Because it is damaged by the heat.
Some chip part will be indicated as follows.
Example
C541
L452
22U
10UH
TA  A
2520
Constants of resistors, capacitors, ICs and etc with XX
indicate that they are not used.
In such cases, the unused circuits may be indicated.
Parts with 
 differ according to the model/destination.
Refer to the mount table for each function.
All variable and adjustable resistors have characteristic
curve B, unless otherwise noted.
Signal name
XEDIT
→ 
EDIT
PB/XREC 
 PB/REC
2
: non flammable resistor
5
: fusible resistor
C
: panel designation
A
: B+ Line
B
: B– Line
J
: IN/OUT direction of (+,–) B LINE.
C
: adjustment for repair.
A
: VIDEO SIGNAL (ANALOG)
A
: AUDIO SIGNAL (ANALOG)
A
: VIDEO/AUDIO SIGNAL
A
: VIDEO/AUDIO/SERVO SIGNAL
A
: SERVO SIGNAL
Circled numbers refer to waveforms.
(Measuring conditions voltage and waveform)
Voltages and waveforms are measured between the
measurement points and ground when camera shoots
color bar chart of pattern box.  They are reference values
and reference waveforms.
(VOM of DC 10 M
 input impedance is used)
Voltage values change depending upon input
impedance of VOM used.)
1. Connection
2. Adjust the distance so that the output waveform of
Fig. a and the Fig. b can be obtain.
When indicating parts by reference number, please
include the board name.
THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS
(In addition to this, the necessary note is printed in each block)
Kinds of capacitor
Case Size
External dimensions (mm)
Note :
Les composants identifiés par une marque
0
 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
le numéro spécifie.
Note :
The components identified by mark 
0
  or
dotted line with mark 
0
 are critical for safety.
Replace only with part number specified.
Fig.b (Picture on monitor TV)
H
A=B/2
A
B
B
A
Y
ellow
Cyan
Green
White
Magenta
Red
Blue
Fig. a (Video output terminal output waveform)
CRT picture frame
Electronic beam
scanning frame
4-2. SCHEMATIC DIAGRAMS
Front of the lens
L = About 27 cm (PTB-450)
L = About 11 cm (PTB-1450)
L
Pattern box
Page of 33
Display

Download Sony DSC-W1 / DSC-W12 Service Manual (Repair Manual)

Here you can view online or download Sony DSC-W1 / DSC-W12 Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Sony DSC-W1 / DSC-W12 Digital Camera. Information contained in Sony DSC-W1 / DSC-W12 service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).