Sony DSC-V1 (serv.man3) Service Manual ▷ View online
SERVICE MANUAL
• INSTRUCTION MANUAL is shown at the end of this document.
Revision History
Revision History
Ver 1.0 2003. 05
LEVEL
1
Link
SELF DIAGNOSIS FUNCTION
ORNAMENTAL PARTS
SPECIFICATIONS
SELF DIAGNOSIS FUNCTION
ORNAMENTAL PARTS
SPECIFICATIONS
Link
DIGITAL STILL CAMERA
DSC-V1
US Model
Canadian Model
AEP Model
UK Model
E Model
Hong Kong Model
Australian Model
Chinese Model
Korea Model
Tourist Model
Japanese Model
— 2 —
DSC-P9
COVER
COVER
SPECIFICATIONS
TM
x
Camera
[System]
Image device
9.04 mm (1/1.8 type) color CCD
Primary color filter
Primary color filter
Total pixels number of camera
Approx. 5 255 000 pixels
Effective pixels number of camera
Approx. 5 090 000 pixels
Lens
4
× zoom lens
f = 7.0 – 28.0 mm (34 – 136 mm when
converted to a 35 mm still camera)
F2.8 – 4.0
converted to a 35 mm still camera)
F2.8 – 4.0
Exposure control
Automatic exposure, Shutter speed
priority, Aperture priority, Manual
exposure, Scene selection (6 modes)
priority, Aperture priority, Manual
exposure, Scene selection (6 modes)
White balance
Automatic, Daylight, Cloudy,
Fluorescent, Incandescent, Flash,
One-push
Fluorescent, Incandescent, Flash,
One-push
File format (DCF compliant)
Still images: Exif Ver. 2.2 JPEG
compliant, GIF (for Clip Motion),
TIFF, DPOF compatible
Audio with still image: MPEG1
compliant (Monaural)
Movies: MPEG1 compliant
(Monaural)
compliant, GIF (for Clip Motion),
TIFF, DPOF compatible
Audio with still image: MPEG1
compliant (Monaural)
Movies: MPEG1 compliant
(Monaural)
Recording media
“Memory Stick”
Flash
Recommended distance (ISO set to
Auto):
0.4 m to 2.8 m (15 3/4 inches to
110 1/4 inches) (W)
0.4 m to 2.0 m (15 3/4 inches to
78 3/4 inches) (T)
Auto):
0.4 m to 2.8 m (15 3/4 inches to
110 1/4 inches) (W)
0.4 m to 2.0 m (15 3/4 inches to
78 3/4 inches) (T)
[Input and Output connectors]
A/V OUT (MONO) (Monaural)
Minijack
Video: 1 Vp-p, 75
Video: 1 Vp-p, 75
Ω, unbalanced,
sync negative
Audio: 327 mV (at a 47 k
Ω load)
Output impedance 2.2 k
Ω
ACC jack
Mini-minijack (ø 2.5 mm)
USB jack
mini-B
[LCD screen]
LCD panel
3.8 cm (1.5 type) TFT drive
Total number of dots
123 200 (560
×220) dots
[General]
Used battery pack
NP-FC11
Power requirements
3.6 V
Power consumption (during shooting with
LCD screen on)
LCD screen on)
1.7 W
Operating temperature
0
°C to 40°C (32°F to 104°F)
Storage temperature
–20
°C to +60°C (–4°F to +140°F)
Dimensions
99.5
×65.2×56.8 mm
(4
×2 5/8×2 1/4 inches)
(W/H/D, excluding maximum
protrusions)
protrusions)
Mass
Approx. 300 g (10.6 oz) (including
battery pack NP-FC11, “Memory
Stick”, and hand strap)
battery pack NP-FC11, “Memory
Stick”, and hand strap)
Built-in microphone
Electret condenser microphone
Built-in speaker
Dynamic speaker
Exif Print
Compatible
PRINT Image Matching II
Compatible
x
AC-LS5 AC Adaptor
Power requirements
100 to 240 V AC, 50/60 Hz
Current consumption
0.16 to 0.09 A
Power consumption
11 W
Rated output voltage
4.2 V DC, 1.5 A
Operating temperature
0
°C to 40°C (32°F to 104°F)
Storage temperature
–20
°C to +60°C (–4°F to +140°F)
Dimensions (approx.)
48
×29×81 mm
(1 15/16
×1 3/16×3 1/4 inches)
(W/H/D) excluding projecting parts
Mass (approx.)
130 g (5 oz) excluding power cord
(mains lead)
(mains lead)
x
NP-FC11 battery pack
Used battery
Lithium-ion battery
Maximum voltage
DC 4.2 V
Nominal voltage
DC 3.6 V
Capacity
2.8 Wh (780 mAh)
x
Accessories
• AC Adaptor (1)
• Power cord (mains lead) (1)
• USB cable (1)
• NP-FC11 battery pack (1)
• A/V connecting cable (1)
• Hand strap (1)
• “Memory Stick” (32 MB) (1)
• CD-ROM (USB driver SPVD-010) (1)
• Operating instructions (1)
Design and specifications are subject to change
without notice.
without notice.
— 3 —
DSC-V1
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
• Unleaded solder melts at a temperature about 40
°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CAUTION
Use of controls or adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.
Use of controls or adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.
— 4 —
DSC-V1
SELF-DIAGNOSIS FUNCTION
COVER
COVER
[Description on Self-diagnosis Display]
Self-diagnosis display
• C: ss: ss
You can reverse the camera
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)
• E: ss: ss
Contact your Sony dealer or local
authorized Sony service facility.
authorized Sony service facility.
Display Code
C:32:ss
C:13:ss
Countermeasure
Turn the power off and on again.
Format the “Memory stick”.
Insert a new “Memory Stick”.
Cause
Trouble with hardware.
Unformatted memory stick is inserted.
Memory stick is broken.
Caution Display During Error
SYSTEM ERROR
FORMAT ERROR
MEMORY STICK ERROR
E:61:ss
E:91:ss
Checking of lens drive circuit.
When failed in the focus and zoom
initialization.
initialization.
Abnormality when flash is being
charged.
charged.
Checking of flash unit or replacement
of flash unit.
of flash unit.
—
