Sony DSC-U20 (serv.man3) Service Manual ▷ View online
29
Shoo
ting s
till
im
age
s
LCD screen display during shooting
You can use [DISPLAY] under [
] with MENU and
v/V on the control button to turn the display on and off.
This is useful when recording under conditions where it
is difficult to check the image on the LCD screen.
This is useful when recording under conditions where it
is difficult to check the image on the LCD screen.
•
For detailed descriptions of the indicators, see page 99.
•
Indicators on the LCD screen are not recorded.
Using the self-timer
,
Set the mode switch to STILL, and press
MENU.
MENU.
The menu appears on the LCD screen.
•
You can also carry out this operation when the mode switch
is set to MOVIE.
is set to MOVIE.
(Displays warnings
only)
only)
(Displays all indicators
that can be displayed)
that can be displayed)
When [DISPLAY] is
[OFF]
[OFF]
When [DISPLAY] is
[ON]
[ON]
23
1280
1632
1
STILL
RETURN
FOCUS
SELFTIMER
P.EFFECT
SELFTIMER
P.EFFECT
AUTO
OFF
OFF
OFF
SIZE BURST
•
1632
1632
1632
MENU
30
,
Select [
] with
v
/
V
on the control
button, then press EXEC.
Select [SELFTIMER] with
Select [SELFTIMER] with
v
/
V
on the
control button, then press EXEC.
,
Select [ON] with
v
/
V
on the control
button, then press EXEC.
When you press MENU, the menu disappears.
The
The
(self-timer) indicator appears on the LCD
screen.
2
SIZE BURST
•
RETURN
FOCUS
SELFTIMER
P.EFFECT
SELFTIMER
P.EFFECT
AUTO
OFF
OFF
OFF
1632
1632
1632
EXEC
3
SELFTIMER
O N
O F F
1632
1632
1632
23
EXEC
31
Shoo
ting s
till
im
age
s
,
Center the subject in the LCD screen,
and press and hold the shutter button
halfway down.
and press and hold the shutter button
halfway down.
,
Press the shutter button fully down.
The self-timer lamp (page 10) flashes in red and the
beep sounds. The image will be shot after
approximately 10 seconds.
beep sounds. The image will be shot after
approximately 10 seconds.
To cancel the self-timer in the middle of the
operation
operation
Close the lens cover or press POWER to turn off the
power.
power.
•
If you press the shutter button while standing in front of the
camera, the focus and the exposure may not be correctly set.
camera, the focus and the exposure may not be correctly set.
4
1632
1632
1632
23
5
23
1632
1632
1632
Self-timer lamp
32
Selecting a flash mode
,
Set the mode switch to STILL, and press
v
( ) on the control button repeatedly to
select a flash mode.
Each time you press v ( ), the indicator changes as
follows:
follows:
No indicator (Auto):
Based on the lighting
conditions, the camera will decide if there is enough
light, and will use the flash accordingly (factory setting).
light, and will use the flash accordingly (factory setting).
r
(Red-eye reduction):
Flash mode is set to Auto,
and the red-eye reduction operates if the flash strobes.
r
(Forced flash):
The flash strobes regardless of the
surrounding brightness.
r
(No flash):
The flash does not strobe.
1632
1632
1632
23
Click on the first or last page to see other DSC-U20 (serv.man3) service manuals if exist.