DOWNLOAD Sony DSC-T9 (serv.man4) Service Manual ↓ Size: 553.55 KB | Pages: 39 in PDF or view online for FREE

6-1

DSC-T9_ADJ

• The Repair Board has already been adjusted. Re-initialization or EVR data copy from the set before repair is not

required.

• Perform “VIDEO OUT Default Data Check” and “Initial Language Data Check” mentioned below, and also the

adjustment items necessary after SY Board replacement.

When you replace to the repairing board, the written data of repairing board also might be changed to original setteing
because of broadcast system (NTSC/PAL).
When the data has changed because of board replaceing etc, check the default data of VIDEO OUT if destination code
is right. If not, rewrite to the right value.

Page

Address

Data

NTSC

PAL

4F

8D

00

01

4F

A2

00

01

Writing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 8D, and set data: 00 (NTSC) or data: 01 (PAL).
3) Select page: 4F, address: A2, and set data: 00 (NTSC) or data: 01 (PAL).
4) Select page: 40, address: 38, and set data: 00.
5) Click [Save] on the SEUS screen.
6) Select page: 80, address: 34, and check that the data is “00”.
7) Select page: 80, address: 30, and check that the data is “00”.
8) Select page: 00, address: 01, and set data: 00.

6-2

DSC-T9_ADJ

If the SY-141 board was replaced, initial language setting may be changed. Accordingly, change the following data so
as to set same initial language as that of the set distributing in each region.

Initial language: Language displayed at the next starting if the setting of Setup menu was reset.

It is different from the language setting selectable with the menu.

Page

Address

Data

Language

GP1

GP2

GP3

GP4

4F

8C

00

English

z

z

z

01

Japanese

z

04

Spanish

z

z

06

Portugal

z

08

Simplified Chinese

z

0B

Russian

z

0D

Korean

z

GP1 is fixed to Japanese.
GP2 is fixed to English.
GP3 is either English, Spanish, or Russian.
GP4 is either English, Spanish, Portugal, Simplified Chinese, or Korean.

Writing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 8C, and set the Initial Language Data.
3) Select page: 40, address: 38, and set data: 00.
4) Click [Save] on the SEUS screen.
5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
8) Turn off the camera.
9) Turn on the camera. Execute “Initialize” of Setup screen.
10) Check the language displayed when the camera starts.

6-3

DSC-T9_ADJ

The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the
internal memory.)

When replacing the SY-165 board, erase the data in internal memory of the board before replacement.

When replacing the SY-165 board or the IC401 on the SY-165 board, execute formatting and initialize the
internal memory after replacement.

Copies all images in the internal memory to a “Memory Stick Duo”.

1 Insert a “Memory Stick Duo” having 64 MB or larger capacity.
2 Select [OK] with v on the control button, then press z.

The message “All data in internal memory will be copied Ready?” appears.

3 Select [OK] with v, then press z.

Copying starts. 

• Use a fully charged battery pack or the AC Adaptor (not supplied). If you attempt to copy image files 

using a battery pack with little remaining charge, the battery pack may run out, causing copying to fail or 
possibly corrupting the data.

• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the 

internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in 

 (Internal Memory Tool) .

• You cannot select a folder copied on a “Memory Stick Duo”.
• Even if you copy data, a 

 (Print order) mark is not copied.

OK

See the following procedure.

Cancel

Cancels the copying.

Formats the internal memory.

• Note that formatting irrevocably erases all data in the internal memory, including even protected images.

1 Select [OK] with v on the control button, then press z.

The message “All data in internal memory will be erased Ready?” appears.

2 Select [OK] with v, then press z.

The format is complete.

OK

See the following procedure.

Cancel

Cancels the formatting.

6-4

DSC-T9_ADJ

If you cannot play back a Music file for the Slide Show, the Music file might be corrupted. If 
this happens, perform [Format Music].
When [Format Music] is performed, all the Music files are erased. Use the supplied software 
“Music Transfer” to activate [Download Music].

The message “All data will be erased Ready?” appears.

OK

Formats the Music files. All data other than Music files 
remain as it is.

Cancel

Cancels the formatting.