Sony DSC-T500 (serv.man3) Service Manual ▷ View online
6-1
DSC-T500_ADJ
LCD, Touch panel unit
(AF illumination LED)
(CCD signal process, Timing gen.)
(CPU, Camera DSP, etc.)
(PITCH, YAW sensor)
LCD901
D002
IC801
IC401
SE1002, SE1001
(COMPLETE)
LCD block
ST-200 flexible board
SY-209 board
SY-209 board
SY-209 board
ST-200 flexible board
SY-209 board
Destination Data Write
Destination data write
z
USB Serial No. Input
USB serial No. input
z
Composite video level
check
check
Composite video level check
z
z
Hall adj.
Auto orientation adj.
CAMERA adjustment 2
Wide limit adj.
z
z
CAMERA adjustment 3
Flange back adj.
z
z
z
CAMERA adjustment 4
Flange back check
z
z
z
F No. compensation
Measure gain, LV adj.
Mechanical shutter adj.
AWB 3200K-5800K standard data input
AWB 3200K-5800K check
Color reproduction check
CCD white defect compensation check
CCD black defect compensation check
CAMERA adjustment 7
Strobe adj.
z
z
z
z
z
CAMERA adjustment 8
Auto focus illumination check
z
z
z
CAMERA adjustment 9
Angular velocity sensor sensitivity adj.
z
z
z
V-COM adj.
White Balance adj.
Touch panel adjustment
Touch panel adj.
z
z
Replaced parts
(COMPLETE) (Note)
Adjusting item
Adjustment
Block
replacement
Board
replacement
Lens block
CCD block assy (Including CD-745 flexible board and CCD imager)
Flash unit
Mounted parts
replacement
z
CAMERA adjustment 5
z
z
LCD adjustment
CAMERA adjustment 6
z
z
z
z
z
CAMERA adjustment 1
z
z
z
Before starting adjustments
1-1. Adjusting items when replacing main parts and boards
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note:
When replacing the SY-209 board, erase the data in internal memory of the board before replacement.
Table 6-1-1
SECTION 6
ADJUSTMENTS
6-2
DSC-T500_ADJ
360 mm
155 mm
280 mm
woody board A
woody board A
9 colors chart
135 mm
Fig. 6-1-1
Note 1:
Personal computer
OS:
OS:
Windows2000/XP/Vista
RAM: 256 MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
Note 2:
In using the 9 colors chart on the pattern box PTB-450, adjust the chart size through the procedure shown below so that it matches
to the pattern box PTB-450.
1) Prepare a woody board A of the thickness 5 mm, and paint it mat-black.
2) Fit the 9 colors chart in the woody board A, and secure the chart with a black tape, etc. to shield the light.
to the pattern box PTB-450.
1) Prepare a woody board A of the thickness 5 mm, and paint it mat-black.
2) Fit the 9 colors chart in the woody board A, and secure the chart with a black tape, etc. to shield the light.
Note 3:
The Multi-output stand must be modified. (Refer to “1-3-1. Multi-Output Stand Modification Procedure”)
1-2. List of service tools
• Oscilloscope
• Color monitor
Personal computer
(Note 1)
(Note 1)
J-1
J-11
J-10
J-8
HASP key and application
for adjustment (SeusZ)
for adjustment (SeusZ)
Contact our service headquarters of each
area how to get the application for
adjustment (SeusZ) and HASP key.
area how to get the application for
adjustment (SeusZ) and HASP key.
J-2
Pattern box PTB-450
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-5
Clear chart
For PTB-450:
J-6080-621-A
J-6080-621-A
For PTB-1450:
J-6082-560-A
J-6082-560-A
J-7
Minipattern box
J-6082-353-B
J-6082-353-B
Siemens star chart
J-6080-875-A
J-6080-875-A
Background paper
J-2501-130-A
J-2501-130-A
9 colors chart (Note 2)
For PTB-1450:
J-6082-562-A
J-6082-562-A
J-6
J-3
J-9
Flange back
adjustment jig
J-6082-563-A
adjustment jig
J-6082-563-A
AC power adaptor
AC-LS5
1-479-284-51
AC-LS5
1-479-284-51
J-12
USB cable
1-829-868-41
1-829-868-41
J-4
J-14
Camera table
J-6082-384-A
J-6082-384-A
J-15
J-13
Multiple connector
extension
J-6082-701-A
extension
J-6082-701-A
Multi-output stand
UC-TE (Note 3)
A-1548-091-A
UC-TE (Note 3)
A-1548-091-A
AV cable
1-824-097-11
1-824-097-11
Ver. 1.1 2009.01
6-3
DSC-T500_ADJ
1-3. Preparation before Using Adjustment Software (SeusZ)
Note 1:
For the adjustment of the set, use the adjustment software (SeusZ).
Install the SeusZ before performing the adjustment.
Install the SeusZ before performing the adjustment.
Note 2:
For the USB connection of the set using the adjustment software (SeusZ), the multi-output stand must be modified to enter the
adjustment mode.
adjustment mode.
1-3-1. Multi-Output Stand Modification Procedure
1) Remove the board from the multi-output stand through the procedure given below.
Fig. 6-1-2
1
2
3
4
5
4
4
4
6-4
DSC-T500_ADJ
2) As shown below, connect the lead wires attached with alligator clips to the check land and GND of the board so as to enable a short circuit
or open circuit to the GND.
Fig. 6-1-3
1-3-2. How to Enter Adjustment Mode
1) Connect the set to the modified multi-output stand.
2) Connect the PC and the modified multi-output stand.
3) Turn on the power with the lead wires connected to the GND of the board (Adjustment mode ON state) as mentioned in “1-3-1. Multi-
2) Connect the PC and the modified multi-output stand.
3) Turn on the power with the lead wires connected to the GND of the board (Adjustment mode ON state) as mentioned in “1-3-1. Multi-
Output Stand Modification Procedure”.
4) Change the USB driver to the one for SeusZ.
Note:
The set has been so designed that the power is turned off automatically in about 60 seconds after the power was turned on.
If the power is turned off automatically while the USB driver is changing, turn on the power again and retry.
If the power is turned off automatically while the USB driver is changing, turn on the power again and retry.
1
45
48
50
47
49
19
1
23
21
20
22
CN001
CN003
CL001
CL002
CL003
2
46
7
6
5
1
CN002
C001
C002
LF001
J001
J002
FB001
VDR001
FB002
VDR002
VDR003
FB003
VDR004
VDR005
FB006
R001
1
4
32
1
5
3
4
Short circuit: Adjustment mode ON state
Open circuit: Adjustment mode OFF state
HDMI OUT
A/V OUT
(STEREO)
USB
DC IN
from the Conductor side
from the Component side
