Sony DSC-T50 (serv.man4) Service Manual ▷ View online
6-34
DSC-T50_ADJ
3.
LED Check
Page 80
Address 12
Page 8E
Address FE
Using method:
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 8E, address: FE, and set data: 20.
3) Select page: 80, address: 12, and set data: 01.
4) Check that all LED are lit.
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 8E, address: FE, and set data: 20.
3) Select page: 80, address: 12, and set data: 01.
4) Check that all LED are lit.
•
SELF TIMER/AF ILLUMINATOR
•
MS ACCESS
•
INDEX
•
ZOOM W/-
•
ZOOM T/+
•
TOUCH PANEL
•
SCREEN STATUS
•
POWER
5) Select page: 80, address: 12, and set data: 00.
6) Select page: 8E, address: FE, and set data: 00.
7) Select page: 00, address: 01, and set data: 00.
8) Click [Disconnect] on the SEUS screen.
9) Disconnect the USB cable.
10) Turn off the power.
6) Select page: 8E, address: FE, and set data: 00.
7) Select page: 00, address: 01, and set data: 00.
8) Click [Disconnect] on the SEUS screen.
9) Disconnect the USB cable.
10) Turn off the power.
4.
Switch Check (1)
Page 80
Address 13
Using method:
1) Select page: 80, address: 13.
2) By discriminating the read data, the state of the switches can
1) Select page: 80, address: 13.
2) By discriminating the read data, the state of the switches can
be discriminated.
Function
When data = 00
When data = 01
When data = 02
Shutter button
(XAE LOCK SW)
(XAE LOCK SW)
OFF
ON
ON
RL-072 flexible S002
Shutter button
(XSHUTTER SW)
(XSHUTTER SW)
OFF
OFF
ON
RL-072 flexible S002
6-35E
DSC-T50_ADJ
C:32:ss
C:13:ss
E:61:ss
E:62:ss
E:91:ss
6.
Switch Check (3)
Page 20
Addresses A0
Using method:
1) Select page: 20, addresses: A0.
2) By discriminating the read data, the pressed key can be dis-
1) Select page: 20, addresses: A0.
2) By discriminating the read data, the pressed key can be dis-
criminated.
7.
Mode Switch Check
Page 20
Addresses A3
Using method:
1) Select page: 20, addresses: A3.
2) By discriminating the read data, the state of the mode switch can be discriminated.
1) Select page: 20, addresses: A3.
2) By discriminating the read data, the state of the mode switch can be discriminated.
8.
Self Diagnosis Code
Note:
After repair, be sure to execute the “Initialize” of the setup screen.
Address
Data
27 to 36
45 to 57
5C to 6C
A3
MOVIE
PLAY
CAMERA
(MODE DIAL0) (RL-072 flexible)
(RL-072 flexible)
(RL-072 flexible)
(IC301 AB14)
(S001)
(S001)
(S001)
Display Code
Countermeasure
Cause
Caution Display During Error
Turn the power off and on again.
Format the “Memory Stick” or
internal memory.
internal memory.
Insert a new “Memory Stick”.
Turn the power off and on again.
Checking of lens drive circuit.
Inspect angular velocity sensor
peripheral circuits.
peripheral circuits.
Checking of flash unit or replacement
of flash unit. (Note)
of flash unit. (Note)
SYSTEM ERROR
FORMAT ERROR
MEMORY STICK ERROR
INTERNAL MEMORY ERROR
–
Trouble with hardware.
“Memory Stick” or internal memory is
unformatted.
unformatted.
“Memory Stick” is broken.
Trouble with internal memory.
When failed in the focus zoom
initialization.
initialization.
Steady shot function does not work well.
Abnormality when flash is being
charged.
charged.
Address
Data
00 to 0F
27 to 36
45 to 57
70 to 84
A0 to FF
A0
ZOOM T
ZOOM W
TOUCH PANEL SCREEN STATUS
(KEY AD0)
(RL-072 flexible) (RL-072 flexible) (RL-072 flexible) (RL-072 flexible)
No key input
(IC301 AA13)
(S012)
(S008)
(S009)
(S010)
Revision History
Reverse
DSC-T50_ADJ
Ver.
1.0
1.1
1.2
Date
2006.09
2007.05
2007.08
History
Official Release
Supplement-1
(S1 DI07-009)
Supplement-2
(S2 DI07-045)
Contents
—
• Change of Automatic Adjustment Program
• Addition of “How to read the sensitivity
• Addition of “How to read the sensitivity
data of angular velocity sensor”
• Change of Automatic Adjustment Program
Version of Automatic Adjustment Program
has been changed from Ver_1.1r02 into
Ver_1.2r03.
has been changed from Ver_1.1r02 into
Ver_1.2r03.
• Addition of “DESTINATION DATA
WRITE”
S.M. Rev.
issued
—
Yes
Yes
985214753.pdf
Revision History
Reverse
DSC-T50_ADJ
Ver.
1.0
1.1
1.2
Date
2006.09
2007.05
2007.08
History
Official Release
Supplement-1
(S1 DI07-009)
Supplement-2
(S2 DI07-045)
Contents
—
• Change of Automatic Adjustment Program
• Addition of “How to read the sensitivity
• Addition of “How to read the sensitivity
data of angular velocity sensor”
• Change of Automatic Adjustment Program
Version of Automatic Adjustment Program
has been changed from Ver_1.1r02 into
Ver_1.2r03.
has been changed from Ver_1.1r02 into
Ver_1.2r03.
• Addition of “DESTINATION DATA
WRITE”
S.M. Rev.
issued
—
Yes
Yes
985214753.pdf