DOWNLOAD Sony DSC-T30 (serv.man2) Service Manual ↓ Size: 232.02 KB | Pages: 7 in PDF or view online for FREE

DSC-T30_L1

2007H0500-1

  © 2007.8

The components identified by
mark  0  or dotted line with
mark 0 are critical for safety.
Replace only with part number
specified.

Les composants identifiés par une
marque  0  sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.

US Model

Canadian Model

AEP Model

UK Model

E Model

Australian Model

Hong Kong Model

Chinese Model

Korea Model

Brazilian Model

Japanese Model

Tourist Model

Photo: Silver

Revised-1

Replace the previously issued
SERVICE MANUAL 9-876-942-41
with this manual.

— 2 —

DSC-T30_L1

Camera
[System]
Image device

7.20 mm (1/2.5 type) color
CCD, Primary color filter

Total pixel number of camera

Approx. 7 410 000 pixels

Effective pixel number of camera

Approx. 7 201 000 pixels

Lens

Carl Zeiss Vario-Tessar 3

×

zoom lens
f = 6.33 – 19.0 mm (38 – 114
mm when converted to a 35
mm still camera)
F3.5 – 4.3

Exposure control

Automatic exposure, Scene
Selection (9 modes)

White balance

Automatic, Daylight, Cloudy,
Fluorescent, Incandescent,
Flash

File format (DCF compliant)

Still images: Exif Ver. 2.21
JPEG compliant, DPOF
compatible
Movies: MPEG1 compliant
(Monaural)

Recording media

Internal Memory (58 MB)
“Memory Stick Duo”

Flash

Recommended distance (ISO
set to Auto): approx. 0.1 to
3.4 m (4 to 133 7/8 inches)
(W)/approx. 0.25 to 2.7 m
(9 7/8 to 106 3/8 inches) (T)

[Input and Output connectors]
Multi connector
USB communication

Hi-Speed USB (USB 2.0
compliant)

[LCD screen]
LCD panel

7.5 cm (3.0 type) TFT
drive

Total number of dots

230 400 (960

×240)

dots

[Power, general]
Power

Rechargeable battery
pack NPFR1, 3.6 V
AC-LS5K AC Adaptor
(not supplied), 4.2 V

Power consumption (during shooting)

1.1 W

Operating temperature

0 to 40ºC (32 to 104ºF)

Storage temperature

–20 to +60ºC (–4 to
+140ºF)

Dimensions

95

×56.5×23.3 mm

(3 3/4

×2 1/4×15/16

inches)
(W/H/D, excluding
protrusions)

Mass

Approx. 169 g (6.0 oz)
(including NP-FR1
battery pack and wrist
strap, etc.)

Microphone

Electret condenser
microphone

Speaker

Dynamic speaker

Exif Print

Compatible

PRINT Image Matching III

Compatible

PictBridge

Compatible

BC-CS3 battery charger
Power requirements

AC 100 to 240 V, 50/60
Hz, 3.2 W

Output voltage

DC 4.2 V, 500 mA

Operating temperature

0 to 40ºC (32 to 104ºF)

Storage temperature

–20 to +60ºC (–4 to
+140ºF)

Dimensions

Approx. 66

×23×91 mm

(2 5/8

×29/32×3 5/8

inches)
(W/H/D)

Mass

Approx. 70 g (2.7 oz)

Rechargeable battery pack NP-FR1
Used battery

Lithium-ion battery

Maximum voltage

DC 4.2 V

Nominal voltage

DC 3.6 V

Capacity

4.4 Wh (1 220 mAh)

Design and specifications are subject to
change without notice.

— 3 —

DSC-T30_L1

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.

LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

1.

Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.

2.

Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.

3.

Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.

4.

Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.

5.

Check the B+ voltage to see it is at the values specified.

6.

Flexible Circuit Board Repairing

• Keep the temperature of the soldering iron around 270°C

during repairing.

• Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering

or unsoldering.

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer.

— 4 —

DSC-T30_L1

Self-diagnosis display
• C: ss: ss

You can reverse the camera
malfunction yourself. (However,
contact your Sony dealer or local
authorized Sony service facility
when you cannot recover from the
camera malfunction.)

• E: ss: ss

Contact your Sony dealer or local
authorized Sony service facility.

Display Code

  C:32:ss

  C:13:ss

Countermeasure

Turn the power off and on again.

Format the “Memory Stick” or internal
memory.

Insert a new “Memory Stick”.

Cause

Trouble with hardware.

“Memory Stick” or internal memory is
unformatted.

“Memory Stick” is broken.

Caution Display During Error

SYSTEM ERROR

FORMAT ERROR

MEMORY STICK ERROR

  E:61:ss

  E:91:ss

Turn the power off and on again.

Trouble with internal memory.

When failed in the focus and zoom
initialization.

Checking of lens drive circuit.

INTERNAL MEMORY ERROR

—

Checking of flash unit or replacement
of flash unit.

Abnormality when flash is being
charged.

  E:62:ss

Steady shot function does not work well.

Inspect angular velocity sensor
Peripheral circuits.