Sony DSC-T20 / DSC-T20HDPR / DSC-T25 (serv.man3) Service Manual ▷ View online
11
GB
[
To check the remaining battery time
Press POWER button to turn on and check the remaining battery on the LCD screen.
• It takes about one minute until the correct battery remaining indicator appears.
• The displayed battery remaining indicator may not be correct under certain circumstances.
• The Clock Set screen appears when the camera is turned on for the first time (page 12).
[
To remove the battery pack/“Memory Stick Duo”
Open the battery/“Memory Stick Duo” cover.
• Never remove the battery pack/“Memory Stick Duo” when the access lamp is lit. This may cause damage
to data in the “Memory Stick Duo”.
Battery
remaining
indicator
remaining
indicator
Battery
remaining
guidelines
remaining
guidelines
Sufficient
power
remaining
power
remaining
Battery
almost fully
charged
almost fully
charged
Battery half
full
full
Battery low,
recording/
playback
will stop
soon.
recording/
playback
will stop
soon.
Change the battery
with fully charged
one, or charge the
battery. (The warning
indicator flashes.)
with fully charged
one, or charge the
battery. (The warning
indicator flashes.)
Slide the battery eject lever.
Be sure not to drop the
battery pack.
Be sure not to drop the
battery pack.
Make sure that the access lamp is
not lit, then push the “Memory Stick
Duo” in once.
not lit, then push the “Memory Stick
Duo” in once.
Battery pack
“Memory Stick Duo”
12
3 Turning the camera on/setting the clock
1
Press the POWER button or slide the lens cover downward.
2
Set the clock with the control button.
1
Select the date display format with v/V, then press z.
2
Select each item with b/B and set the numeric value with v/V, then press z.
3
Select [OK], then press z.
[
To change the date and time
Press the HOME button, and select [
Clock Settings] in
(Settings) (page 18).
[
When you turn on the power
•
After installing the battery pack into the camera, it may take a little while to get the camera
powered.
powered.
•
If the camera is running on battery power and you do not operate the camera for about three
minutes, the camera turns off automatically to prevent wearing down the battery pack (Auto
power-off function).
minutes, the camera turns off automatically to prevent wearing down the battery pack (Auto
power-off function).
POWER button
Control button
ɟ
Lens cover
1
2
3
z
button
HOME button
13
GB
Shooting images easily (Auto adjustment mode)
The following procedure is for shooting a still image.
1
Slide the lens cover downward.
2
Hold the camera steady, keeping your arm at your side.
3
Shoot with the shutter button.
Movie:
Press the HOME button, and select [
Movie Mode] in
(Shooting) (page 18).
Tripod receptacle
(bottom)
(bottom)
Shutter
button
ɠ
Zoom button
MENU button
Control button
HOME button
Macro button
Lens cover
Self-timer button
Flash button
DISP button
Lens
Self-timer lamp
Flash
Microphone
Position the subject
in the center of the
focus frame.
in the center of the
focus frame.
Still image:
1
Press and hold the shutter button
halfway down to focus.
halfway down to focus.
The z (AE/AF lock) indicator (green)
flashes, a beep sounds, the indicator stops
flashing and remains lit.
flashes, a beep sounds, the indicator stops
flashing and remains lit.
2
Press the shutter button fully down.
The shutter sounds.
AE/AF lock indicator
14
Zoom/Flash/Macro/Self-timer/Display
[
Using the zoom
Press
to zoom, press
to undo zoom.
[
Flash (Selecting a flash mode
for still images)
Press
B
( ) on the control button repeatedly
until the desired mode is selected.
:
Flash Auto
Strobes when there is insufficient light or
backlight (default setting)
backlight (default setting)
:
Flash forced on
:
Slow synchro (Flash forced on)
The shutter speed is slow in a dark place to
clearly shoot the background that is out of
flash light.
clearly shoot the background that is out of
flash light.
:
Flash forced off
[
Macro/Close Focus (Shooting
close-up)
Press
b
(
) on the control button
repeatedly until the desired mode is
selected.
selected.
:
Macro off
:
Macro On (W side: Approx. 8 cm or farther
(3 1/4 inches or farther), T side: Approx. 25 cm or
farther (9 7/8 inches or farther))
farther (9 7/8 inches or farther))
:Close focus enabled (Locked to the W side:
Approx. 1 to 20 cm (13/32 to 7 7/8 inches))
[
Using the self-timer
Press
V
(
) on the control button
repeatedly until the desired mode is
selected.
selected.
:
Not using the self-timer
: Setting the 10-second delay self-timer
: Setting the 2-second delay self-timer
Press the shutter button, the self-timer lamp
flashes, and a beep sounds until the shutter
operates.
flashes, and a beep sounds until the shutter
operates.
[
DISP
Changing the screen
display
Press v (DISP) on the control button.
Each time you press v (DISP) button, the
display changes as follows.
Each time you press v (DISP) button, the
display changes as follows.
Brightness of LCD backlight up
r
Histogram on
r
Indicators off
r
Indicators on
r
Histogram on
r
Indicators off
r
Indicators on
Click on the first or last page to see other DSC-T20 / DSC-T20HDPR / DSC-T25 (serv.man3) service manuals if exist.