DOWNLOAD Sony DSC-T2 (serv.man2) Service Manual ↓ Size: 3.77 MB | Pages: 58 in PDF or view online for FREE

DSC-T2_L2

2008E0800-1

  © 2008.05

US Model

Canadian Model

AEP Model

UK Model

E Model

Australian Model

Hong Kong Model

Chinese Model

Korea Model

Argentine Model

Brazilian Model

Thai Model

Japanese Model

Tourist Model

The components identified by
mark  0 or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.

Les composants identifiés par une
marque  0 sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.

Photo: Black

— 2 —

DSC-T2_L2

Audio output (Monaural)
USB communication

: Video output

Image device: 7.18 mm (1/2.5 type) color CCD, 

Primary color filter

Total pixel number of camera: 

Approx. 8 286 000 pixels

Effective pixel number of camera: 

Approx. 8 083 000 pixels

6.33  – 19.0 mm (38 – 114 mm when 
converted to a 35 mm still camera) F3.5 – 4.3

Exposure control: Automatic exposure, Scene 

Selection (10

  modes)

White balance: Automatic, Daylight, Cloudy, 

Fluorescent 1, 2, 3, Incandescent, Flash

File format (DCF compliant):

 

Still images: Exif Ver. 2.21 JPEG compliant  
Movies: MPEG1 compliant (Monaural)

Recording media: Internal Memory (approx. 

3.8 GB), “Memory Stick Duo”

Flash: Flash range (ISO sensitivity

(Recommended Exposure

approx. 0.25 to 2.8 m (9 7/8 inches to
9 feet 2 1/4 inches) (T)

Multi connector 

USB communication : Hi-Speed USB (USB 2.0 

compliant)

LCD panel: 6.7 cm (2.7 type) TFT drive

Power: Rechargeable battery pack NP-BD1, 3.6 V

NP-FD1 (not supplied), 3.6 V

AC-LS5K AC Adaptor (not supplied), 4.2 V

Power consumption (during shooting): 1.0 W 
Operating temperature: 0 to 40  ºC  (32 to 104  ºF)
Storage temperature: –20 to +60  ºC (–4 to +140  ºF)

protrusions)

Mass (including NP-BD1 battery pack, paint pen

and strap etc.): Approx. 156 g (5.5 oz)

 

Microphone: Monaural
Speaker: Monaural
Exif Print: Compatible
PRINT Image Matching III: Compatible
PictBridge: Compatible

Power requirements: AC 100 V

 

to 240 V, 50/60 Hz, 

2.2 W

Output voltage: DC 4.2 V, 0.33 A
Operating temperature: 0 to 40  ºC  (32 to 104  ºF)
Storage temperature: –20 to +60  ºC  (–4 to +140  ºF )

Mass: Approx. 75 g (2.7 oz)

Used battery: Lithium-ion battery
Maximum voltage: DC 4.2 V
Nominal voltage: DC 3.6 V
Capacity: 2.4 Wh (680 mAh)

Design and specifications are subject to change 
without notice.

Lens: Carl Zeiss Vario-Tessar 3

×

 zoom lens f =

Total number of dots: 230 400 (960

×

240) dots

Dimensions: 86.8

×

56.8

×

20.2 mm (3 1/2

×

 

2 1/4

×

13/16 inches) (W/H/D, excluding

Dimensions: Approx. 62

×

24

×

91 mm (2 1/2

×

 

31/32

×

3 5/8 inches) (W/H/D)

Index) set to Auto): approx. 0.1 to 3.2 m 

(4 inches to 10 feet 10 6 inches) (W)/

DSC-T2_L2

— 3 —

0

0

0

1.

Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.

2.

Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.

3.

Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.

4.

Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.

5.

Check the B+ voltage to see it is at the values specified.

6.

FLEXIBLE Circuit Board Repairing

• Keep the temperature of the soldering iron around 270°C

during repairing.

• Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering

or unsoldering.

Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)

Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40°C higher than

ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350

°C.

Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!

• Strong viscosity

Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.

• Usable with ordinary solder

It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer.

CAUTION

Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.

1-1

DSC-T2_L2

In case of SY180-MC186 Board replacement, repair in the order of following flowchart.
At this time, be careful about the repairing process is different in cases of turning power on the set is possible or not.

(

*

1) For details, please refer to the service manual for adjustments separately issued.

(

*

2) "PMB Portable" is the embeded application software in the set. Installer is available in each destination and language.

       There are seven kinds of installers.

Turning power on is
possible

Copy the data in internal
memory to the personal
computer

Read out the adjustment 
data (

*

1)

• USB serial No.
• Wide limit data
• Anti-blur correction data

SY-180 board
replacement

Write the destination data

(

*

1)

Write USB serial No.

(

*

1)

All kinds of adjustment

(VIDEO/CAMERA/LCD)

(

*

1)

Write back the backup
data in the personal
computer to internal
memory

Turning power on is

impossible

SY-180 board

replacement

Write the destination data

(

*

1)

Write USB serial No.  (

*

1)

All kinds of adjustment

(VIDEO/CAMERA/LCD)

(

*

1)

Re-install "PMB
Portable"  (

*

2)

End

End

 “PMB Portable” is not installed in the SY-180 board for repair.

Therefore, it is necessary to re-install the “PMB Portable” for each destination and language.

 The shooting images are recorded into internal memory prior to the others within the Memory Stick.

When the internal memory is full, the shooting images is recorded into the Memory Stick.

 All the shooting images on repairing are recorded into the internal memory, so be sure to erase the shooting images after repairing.