Sony DSC-T100 (serv.man13) Service Manual ▷ View online
HELP
DSC-T100_L2
AJUDA
Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
SW-496 flexible board
Loudspeaker
Microphone block
SY-171
board
board
Harness (Black)
Harness (Black)
Harness (Red)
Harness (Red)
HELP
DSC-T100_L2
•
Hold the LSV-1220A at the center of both sides.
•
Do not hold the LSV-1220A in the front-rear thickness
direction.
direction.
•
Do not touch the top of lens prism.
•
Do not touch the motor coil or terminals.
LSV-1220A
Hold here.
Do not touch here.
LSV-1220A
LSV-1220A
Lens prism
Do not touch
the coil.
the coil.
LSV-1220A
Motor
Do not touch
the terminals.
the terminals.
PRECAUÇÃO NO MANUSEIO DO
LSV-1220A
HELP
DSC-T100_L2
Lens
Lens block
Solder
Note:
Take care not to melt
the mold part of .
Take care not to melt
the mold part of .
PROCEDIMENTO DE DESMONTAGEM DO MOTOR DE FOCO
Cover the lens surface for protection.
1
Cover the lens surface to protect from solder splashing.
2
Remove the solder.
3
Remove one screw.
*
Tightening torque = 0.5
±
0.1kgf
•
cm
4
Remove the focus motor from the lens block.
Screw
Focus motor
Lens
Lens block
Solder
Cover the lens
surface for protection.
surface for protection.
1
Cover the lens surface to protect from solder splashing.
2
Remove the solder.
3
Remove two screws.
*
Tightening torque = 0.5
±
0.1kgf
•
cm
4
Remove the zoom motor from the lens block.
Screw
Zoom motor
Note:
Take care not to melt
the mold part of .
Take care not to melt
the mold part of .
PROCEDIMENTO DE DESMONTAGEM DO MOTOR DE
ZOOM
HELP
DSC-T100_L2
BT holder
Notch
1
BT-035
flexible board
flexible board
2
Battery terminal board
Battery terminal
board
board
Notch
Notch
Battery terminal board
1
Install the BT-035 flexible board in the BT holder.
2
Insert the battery terminal board into a slit in the BT holder to install.
* The battery terminal board is attached with the notch for installation.
* The battery terminal board is attached with the notch for installation.
3
Fold the notch 3 or 4 times repeatedly to break.
MÉTODO PARA INSTALAÇÃO DA TERMINAL DE BATERIA
Click on the first or last page to see other DSC-T100 (serv.man13) service manuals if exist.