DOWNLOAD Sony DSC-T10 (serv.man2) Service Manual ↓ Size: 4.3 MB | Pages: 44 in PDF or view online for FREE

1-2

DSC-T10_L2

The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.)

When replacing the SY-163 board, erase the data in internal memory of the board before replacement.

When replacing the SY-163 board or the IC401 on the SY-163 board, execute formatting and initialize the internal memory after
replacement.

Copies all images in the internal memory to a “Memory Stick Duo”.

1

Insert a “Memory Stick Duo” having 64 MB or larger capacity.

2

Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be copied Ready?” appears.

3

Select [OK] with v, then press z.
Copying starts. 

Select [Cancel] in step 2 or 3, then press z.

• Use a fully charged battery pack or the AC Adaptor (not supplied). If you attempt to copy image files 

using a battery pack with little remaining charge, the battery pack may run out, causing copying to fail or 
possibly corrupting the data.

• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the 

internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in 

 (Internal Memory Tool).

• You cannot select a folder copied on a “Memory Stick Duo”.
• Even if you copy data, a 

 (Print order) mark is not copied.

This item does not appear when a “Memory Stick Duo” is inserted in the camera.

Formats the internal memory.

• Note that formatting irrevocably erases all data in the internal memory, including even protected images.

1

Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be erased Ready?” appears.

2

Select [OK] with v, then press z.
The format is complete.

Select [Cancel] in step 1 or 2, then press z.

If you cannot play back a Music file for the Slide Show, the Music file might be corrupted. If 
this happens, perform [Format Music].
When [Format Music] is performed, all the Music files are erased. Use the supplied software 
“Music Transfer” to activate [Download Music].

1

Select [OK] with v on the control button, then press z.
The message “All data will be erased Ready?” appears.

2

Select [OK] with v, then press z.
All the Music files are erased.

Select [Cancel] in step 1 or 2, then press z.

1-3E

DSC-T10_L2

If the SY-163 board is replaced, the broadcast system data setting (NTSC/PAL) might be changed.
Check the default data of VIDEO OUT if destination code is right. If not, rewrite to the right value.

Writing Method:
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 4F, address: 8D, and set data: 00 (NTSC) or data: 01 (PAL).
3) Select page: 40, address: 38, and set data: 00.
4) Click 

[Save]

 on the SEUS screen.

5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.

If the SY-163 board is replaced, initial language setting may be changed. Check the default data of INITIAL LANGUAGE if destination code
is right. If not, rewrite to the right value.

Initial language: Language displayed at the next starting if the setting of Setup menu was reset.

It is different from the language setting selectable with the menu.

Page

Address

Data

Language

GP1

GP2

GP3

GP4

4F

8C

00

English

z

z

z

01

Japanese

z

04

Spanish

z

z

06

Portugal

z

08

Simplified Chinese

z

0B

Russian

z

0D

Korean

z

GP1 is fixed to Japanese.
GP2 is fixed to English.
GP3 is either English, Spanish, or Russian.
GP4 is either English, Spanish, Portugal, Simplified Chinese, or Korean.

Writing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 8C, and set the Initial Language Data.
3) Select page: 40, address: 38, and set data: 00.
4) Click 

[Save]

 on the SEUS screen.

5) Select page: 80, address: 34, and check that the data is “00”.
6) Select page: 80, address: 30, and check that the data is “00”.
7) Select page: 00, address: 01, and set data: 00.
8) Turn off the camera.
9) Turn on the camera. Execute “Initialize” of Setup screen.
10) Check the language displayed when the camera starts.

Address

00

01

8D

4F

Page

Data

NTSC

PAL

2-1

DSC-T10_L2

• Make sure that the flat cable and flexible board are not cracked of bent at the terminal.

Do not insert the cable insufficiently nor crookedly.

• When remove a connector, don’t pull at wire of connector. It is possible that a wire is snapped.

• When installing a connector, don’t press down at wire of connector.

It is possible that a wire is snapped.

• Do not apply excessive load to the gilded flexible board.

Cut and remove the part of gilt 
which comes off at the point.
(Be careful or some 
pieces of gilt may be left inside) 

The charging capacitor (C328) of the ST-131 board is charged
up to the maximum 300 V potential.
There is a danger of electric shock by this high voltage when the
capacitor is handled by hand.  The electric shock is caused by
the charged voltage which is kept without discharging when the
main power of the unit is simply turned off.  Therefore, the
remaining voltage must be discharged as described below.

To preparing the short jig, a small clip is attached to each end of
a resistor of 1 k

Ω /1 W (1-215-869-11).

Wrap insulating tape fully around the leads of the resistor to
prevent electrical shock.

1 k

Ω

/1 W

Wrap insulating tape.

Note: High-voltage cautions

Discharging the Capacitor
Short-circuit between the two points 
with the short jig about 10 seconds.

R:1 k

Ω

/1 W

 

(Part code: 1-215-869-11)

2-2

DSC-T10_L2

Follow the disassembly in the numerical order given.

1

Cabinet (Front) Assy (

1

-1 to 

1

-4)

2

Lens Block (

2

-1 to 

2

-3)

3

Control Switch Block (

3

-1 to 

3

-6)

2

Lens Block

1

Cabinet (Front) Assy

1

-1

(#18/#29)

3

Control Switch Block

3

-1 (#18/#29)

3

-2

1

-2 (#18/#29)

1

-3 (#18/#29)

1

-4 (Claw)

2

-2

2

-3

3

-3 (Claw)

3

-4

3

-5

3

-6

Note: High-voltage cautions

Discharging the Capacitor
Short-circuit between the two points 
with the short jig about 10 seconds.

R:1 k

Ω

/1 W

 

(Part code: 1-215-869-11)

2

-1