DOWNLOAD Sony DSC-T1 (serv.man2) Service Manual ↓ Size: 503.08 KB | Pages: 40 in PDF or view online for FREE

6-3

• Oscilloscope

• Color monitor

• Vectorscope

• AC power adapter

• Calculator which can hexadecimal calculation.

J-1

J-2

J-3

J-4

J-5

J-6

J-7

J-8

J-9

J-10

J-11

Fig. 6-1-1.

J-1

J-2

J-3

J-4

J-5

J-6

J-7

J-8

J-9

J-10

J-11

J-12

Filter for color temperature correction (C14)

Pattern box PTB-450

Color bar chart for pattern box

Siemens star chart

Clear chart for pattern box

Mini pattern box

Camera table

Personal computer with Windows98/ME/2000/XP

installed and with two USB ports

USB cable

Application for adjustment (SEUS) and HASP key

Background paper

Cradle

J-6080-058-A

J-6082-200-A

J-6020-250-A

J-6080-875-A

J-6080-621-A

J-6082-353-B

J-6082-384-A

1-828-073-11

J-2501-130-A

1-817-742-11

Auto white balance adjustment/check

White balance adjustment/check

For checking the flange back

For adjusting the flange back

For adjusting the flange back

For connecting the personal computer

Contact our service headquarter of each area how to get

the application for adjustment (SEUS) and HASP key

For adjusting the strobe

J-12

6-4

1)

Connect the equipment for adjustments according to Fig. 6-1-4.

2)

Start up the application for adjustment (SEUS).

Setting the “Forced Power ON Mode (Forced STILL Mode)”
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 2F, address: 23, and write data: 01.
3) Save the data.
4) Wait for 2 sec.

The above procedure will enable the power (STILL mode) to
be turned on with POWER switch (Control switch block)
disconnected. After completing adjustments, be sure to exit the
“Forced Power ON Mode”.

Setting the “Forced Power ON Mode (Forced PLAY Mode)”
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 2F, address: 23, and write data: 02.
3) Save the data.
4) Wait for 2 sec.

The above procedure will enable the power (PALY mode) to be
turned on with POWER switch (Control switch block)
disconnected. After completing adjustments, be sure to exit the
“Forced Power ON Mode”.

Exiting the “Forced Power ON Mode”
1) Select page: 00, address: 01, and set data: 01.
2) Select page: 2F, address: 23, and write data: 80.
3) Save the data.
4) Wait for 2 sec.
5) Select page: 00, address: 01, and set data: 00.

The capacitor which is used as power supply of flashlight is charged
with 200V to 300V voltage. When disassembling the unit, discharge
this voltage in order to protect service engineers from electric shock.

Discharge procedure
1.

Remove the power supply (AC power adaptor or battery).

2.

Fabricate the discharging jig as shown in Fig. 6-1-3 locally by
yourself. Connect the discharging jig to the positive (+) and
negative (-) terminal of the flash voltage charge capacitor. Allow
ten seconds to discharge the voltage.

Fig. 6-1-2.

Fig. 6-1-3.

Capacitor

ST-86 BOARD

Shorting jig
(1k

Ω

 / 1w)

 About 30cm

Front of the lens

Pattern box

6-5

Fig. 6-1-4

Memory stick DUO

Cradle

Personal computer
(with two USB ports)

AC IN

DC IN

USB

USB1

USB2

HASP key

AC power
adaptor

6-6

H

A=

C=D

A

A

B

C

D

Enlargement

V

Picture frame

A

Difference in level

Y

ello

w

Cy

an

Green

White

Magenta

Red

Blue

Y

ello

w

Cy

an

Green

White

Magenta

Red

Blue

Video terminal

output waveform

Fig. b 

Fig. a

B

2

LCD screen or under scan 

monitor TV picture

Unless otherwise specified, set the switches as follows and perform
adjustments.

Switch settings
1.

Mode switch ....................................................... STILL ( 

 )

2.

Lens cover ...................................................................... Open

3.

ZOOM .................................................................... WIDE end

3.

MACRO ( 

 ) .................................................................. ON

4.

SCENE (Menu) ............................................................... Auto

5.

VIDEO OUT (SET UP of Menu) ................................. NTSC

Basically carry out adjustments in the order given.

Fig.6-1-5.

1)

Color bar chart (Standard picture frame)
When performing adjustments using the color bar chart, adjust
the picture frame as shown in Fig. 6-1-5. (Standard picture
frame)

2)

Clear chart (Color reproduction adjustment frame)
Remove the color bar chart from the pattern box and insert a
clear chart in its place. (Do not perform zoom operations during
this time.)

Adjust the camera position and direction to
obtain the output waveform shown in Fig. a
and the LCD screen or the monitor TV
display shown in Fig. b.