Sony DSC-S950 (serv.man2) Service Manual ▷ View online
5-8
DSC-S950_ADJ
5-2-5. Near Focus Adjustment
Note:
Perform the Near Focus Adjustment after the Far Focus adjustment.
1) Be sure to set 50
± 1 cm distance between the chart and the tip of camera lens.
2) Check that the center of chart meets the center of shot image
screen with the zoom lens at TELE end and WIDE end respectively.
Color temperature = 5000
±
300K
Be sure not to turn off the power during adjusting.
Adjustment order
Screen display
The adjustment finished normally.
The adjustment is finished abnormally.
The adjustment is complete.
Malfunction of Near Focus ad-
justment
justment
In case of the Near Focus adjust-
ment is failed, readjust the Far
Focus adjustment and try to re-
adjust the Near Focus adjust-
ment.
ment is failed, readjust the Far
Focus adjustment and try to re-
adjust the Near Focus adjust-
ment.
Chart
50
±
1 cm
Camera
Equipments required: Chart
Camera table
Set the unit to the adjustment mode.
* For the setting procedure of the adjustment mode, refer to Page 5-2.
Set the camera as show in Fig. 5-2-24.
Press the control button “B”, then Near Focus Adjustment starts.
Confirm the indication
on the screen.
Finished normally.
Finished abnormally.
In case of the adjustment is finished normally.
the adjustment completion indication appears
on the screen. (Fig. 5-2-25)
Turn off the power to quit the adjustment mode.
the adjustment completion indication appears
on the screen. (Fig. 5-2-25)
Turn off the power to quit the adjustment mode.
In case of the adjustment is finished abnormally.
the following indication appears on the screen.
(Fig. 5-2-26)
In this case, confirm the adjusting environment
and readjust.
In case of the Near Focus adjustment is failed,
readjust the Far Focus adjustment and try to
readjust the Near Focus adjustment.
the following indication appears on the screen.
(Fig. 5-2-26)
In this case, confirm the adjusting environment
and readjust.
In case of the Near Focus adjustment is failed,
readjust the Far Focus adjustment and try to
readjust the Near Focus adjustment.
O Near Focus Station Passed
Please Key MENU Enter...
X
Near Focus NG !
Please ReAdjust Far Focus
Fig. 5-2-25
Fig. 5-2-26
Fig. 5-2-24
5-9
DSC-S950_ADJ
5-2-6. WB/ISO Adjustment
The White balance Adjustment is as follows.
Small pattern box (PTB-1450) setting:
Color temperature = 3150
±
50K
Luminance: LV 12.3
±
0.2
Adjustment order
Set the unit to the adjustment mode.
* For the setting procedure of the adjustment mode, refer to Page 5-2.
Place the camera in front of the small pattern box (PTB-1450). (Fig. 5-2-27)
Press the control button “ ”, then WB/ISO Adjustment starts.
Confirm the indication
on the screen.
Finished normally.
Finished abnormally.
In case of the adjustment is finished normally.
the adjustment completion indication appears
on the screen. (Fig. 5-2-28)
Turn off the power to quit the adjustment mode.
the adjustment completion indication appears
on the screen. (Fig. 5-2-28)
Turn off the power to quit the adjustment mode.
In case of the adjustment is finished abnormally.
the following indication appears on the screen.
(Fig. 5-2-29 to 5-2-31)
In this case, confirm the adjusting environment
and readjust.
the following indication appears on the screen.
(Fig. 5-2-29 to 5-2-31)
In this case, confirm the adjusting environment
and readjust.
Screen display
The adjustment is finished normally.
Fig. 5-2-28
The adjustment is finished abnormally.
Fig. 5-2-29
Fig. 5-2-30
Fig. 5-2-31
The adjustment is complete.
Malfunction of Cap White Bal-
ance adjustment
ance adjustment
Malfunction of Pre White Bal-
ance adjustment
ance adjustment
Malfunction of White Balance
adjustment
adjustment
O WB OK
X WB NG
X Pre WB NG
X Cap WB NG
Equipments required: Small pattern box (PTB-1450)
Camera table
Small pattern box
(PTB-1450)
(PTB-1450)
0.5
to
1 cm
Camera
Fig. 5-2-27
Ver. 1.1 2009.07
5-10
DSC-S950_ADJ
5-2-7. Set Lang Destination
Language destination set:
Save “lang.txt” document in the root directory of Memory Stick PRO Duo used.
The content of “lang.txt” as follows:
The content of “lang.txt” as follows:
Language destination (for example: U2) (enter key)
Product ID (10 bit) (enter key) (Refer to “5-3. PRODUCT ID LIST”)
S/N (7 bit) (enter key)
Product ID (10 bit) (enter key) (Refer to “5-3. PRODUCT ID LIST”)
S/N (7 bit) (enter key)
Now as DSC-S950 silver camera U2 Lang Destination setting for the lang.txt document example.
U2
0048870634
0120243
0048870634
0120243
especially attention:
1.
The enter key must be the end symbol each row.
2.
The product ID refer to “5-3. PRODUCT ID LIST”. And the product ID must be 10 bit. If the product ID less than 10
bit, add 0 before the product ID.
bit, add 0 before the product ID.
3.
The S/N must be 7 bit. It refer to the serial number of shipment.
Adjustment order
Set the unit to the adjustment mode.
* For the setting procedure of the adjustment mode, refer to Page 5-2.
Press “Shutter button”, then Set Lang Destination starts.
Confirm the indication
on the screen.
Finished normally.
Finished abnormally.
In case of the adjustment is finished normally.
the adjustment completion indication appears
on the screen. (Fig. 5-2-32)
Turn off the power to quit the adjustment mode.
the adjustment completion indication appears
on the screen. (Fig. 5-2-32)
Turn off the power to quit the adjustment mode.
In case of the adjustment is finished abnormally.
the following indication appears on the screen.
(Fig. 5-2-33)
In this case, confirm the adjusting environment
and readjust.
the following indication appears on the screen.
(Fig. 5-2-33)
In this case, confirm the adjusting environment
and readjust.
Screen display
The adjustment is finished normally.
The adjustment is complete.
The adjustment is finished abnormally.
Lan:XXX NTSC Des:XXX
Set LangDestination OK!
Set LangDestination
Read Language NG!
Note:
The screen above is an example.
Fig. 5-2-32
Fig. 5-2-33
Malfunction of Set language
destination.
In case of the set language desti-
nation is failed, reset the lan-
guage destination.
destination.
In case of the set language desti-
nation is failed, reset the lan-
guage destination.
Ver. 1.1 2009.07
5-11E
DSC-S950_ADJ
5-3. PRODUCT ID LIST
Selectable Language Table
Japanese
English
French
German
Spanish
Italian
Portuguese
Simplified
Chinese
Traditional
Chinese
Dutch
Russian
Korean
Persian
Arabic
Thai
Melayu
Swedish
Norwegian
Danish
Finnish
Polish
Czech
Hungarian
Turkish
Greek
J
J
z
NTSC
JE3
JE
z
a
a
a
a
a
a
a
a
a
a
PAL
U2
US
z
a
a
a
a
a
NTSC
CA2
CND
z
a
a
a
a
a
NTSC
CEE2
a
a
a
a
a
a
a
z
a
a
a
a
a
a
a
a
a
PAL
CEE8
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
PAL
CEE9
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
PAL
CEH
UK
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
PAL
E15
z
a
a
a
a
a
a
a
a
a
a
PAL
E32
z
a
a
a
a
a
a
a
a
a
a
PAL
E33
a
a
z
a
a
a
a
a
a
a
a
NTSC
E37
z
a
a
a
a
a
a
a
a
a
a
PAL
TH6
Thai
a
a
a
a
a
a
a
a
a
z
a
PAL
AU2
AUS
z
a
a
a
a
a
PAL
HK1
HK
z
a
a
a
a
a
a
a
a
a
a
PAL
CN1
CH
a
a
a
a
z
a
a
a
a
a
a
PAL
KR2
KR
a
a
a
a
a
a
z
a
a
a
a
NTSC
AR2
AR
a
a
z
a
a
a
a
a
a
a
a
NTSC
BR1
BR
a
a
a
z
a
a
a
a
a
a
a
NTSC
z
: INITIAL LANGUAGE
E
VIDEO OUT
Default
AEP
DESTINATION
AREA
SELECTABLE LANGUAGE
Silver
48870606
Silver
48870640
Black
48870607
Black
48870641
Pink
48870608
Pink
48870642
Silver
48870610
Silver
48870650
Black
48870670
Black
48870663
Pink
48870686
Pink
48870693
Silver
48870611
Silver
48870651
Black
48870671
Black
48870664
Pink
48870687
Pink
48870694
Silver
48870612
Silver
48870652
Black
48870672
Black
48870665
Pink
48870688
Pink
48870695
Silver
48870613
Silver
48870660
Black
48870673
Black
48870661
Pink
48870689
Pink
48870662
Silver
48870617
Silver
48870675
Black
48870627
Black
48870676
Pink
48870646
Pink
48870677
Silver
48870620
Silver
48870680
Black
48870621
Black
48870681
Pink
48870622
Pink
48870682
Silver
48870623
Silver
48870683
Black
48870624
Black
48870684
Pink
48870625
Pink
48870685
Silver
48870634
Silver
48870690
Black
48870635
Black
48870691
Pink
48870636
Pink
48870692
TH6
AU2
Product ID
AR2
U2
CA2
CEE8
CEE9
CEE2
CEH
CN1
KR2
E15
HK1
BR1
JE3
Area
Color
E32
E33
Area
Color
Product ID
E37
Ver. 1.1 2009.07
Click on the first or last page to see other DSC-S950 (serv.man2) service manuals if exist.