DOWNLOAD Sony DSC-S730 (serv.man2) Service Manual ↓ Size: 127.89 KB | Pages: 9 in PDF or view online for FREE

2008I0200-1

  © 2008.09

DSC-S730_ADJ

5-1

DSC-S730_ADJ

For the chart, search “J-6082-563-A” in the JIG & Software on ESI homepage, download the PDF file and print out it on the A4 size

white paper.

Paste it to the chart pasting position on the flange back adjustment jig aligning center without wrincles.

Connect the equipments as shown below.

J-7

J-5

Small pattern box
PTB-1450
J-6082-557-A

J-3

Cord with connector
1-830-351-21

J-4

Chart
(Note)

J-6

Flange back
adjustment jig
J-6082-563-A

Camera table
J-6082-384-A

J-1

SONY 
Memory Stick Duo
(128MB or less)

AC power adaptor
(AC-LS5)
1-479-284-51

J-2

To wall outlet

DSC-S730
Bottom side

AC power adaptor
AC-LS5
(1-479-284-51)

Cord with connector
(1-830-351-21)

Power cord
(Supplied with AC-LS5)

Memory Stick Duo
(128MB or less)

5-2

DSC-S730_ADJ

In case of replacing lens, the adjustments mentioned below are required.

• Aperture Diameter/Mechanical Shutter Adjustment

• Zoom Adjustment

• Infinity Focus Adjustment

• Near Focus Adjustment

Save the firmware file in the root directory of Memory Stick.

Saving it in the other directory causes the malfunction of program.

The firmware file is downloadable from the ESI homepage.

First, format the Memory Stick before copying the firmware.

When formatting, perform on the PC, using the FAT. Do not format on the unit.
If the concealed file “MEMSTICK.IND” exists, delete it.

Decompress the file and confirm the file format as shown below.

Firmware file for DSC-S730: 

Save the file in the root directory of Memory Stick.

This Memory Stick saved the firmware is used in the adjustments.

1. With the camera turned OFF, set the Mode dial to “Program auto shooting mode” and insert the Memory Stick with the firmware files

into the Memory Stick slot of the camera.

2. While pressing the “Image Size” button, press the POWER button and release when the POWER lamp and the LCD display turns on.

Release the “Image Size” button when the POWER lamp and the LCD display goes out.

3. After a few seconds, the LCD display will turn white and then show the Adjustment mode screen.

Pushing “

MENU

” button, the adjustment is finished makes to return to the initial screen display for adjustments.

In case of adjusting continuously, go to the next step with above mentioned operation.

Changing the Mode dial will take you out of the Adjustment mode.
When all adjustments are completed, just simply remove the power from the unit completes the adjustment procedure.

The changed portions from
Ver. 1.0 are shown in blue.

5-3

DSC-S730_ADJ

After lens replacement, perform adjustments to operate the camera.

Followings are keys and functions used in the adjustments.

The initial screen for the adjustment mode is as follows.

v

/

V

/

b

/

B

 button

z

 button

Macro button

DISP button

Flash button

Self-timer button

 (Delete) button

Control button

ME

Power button

Zoom button

Access Lamp

NU button

 (Playback) button

 (Image Size)/ 

Program auto shooting mode

Mode dial