Sony DSC-S600 (serv.man12) Service Manual ▷ View online
6-3
DSC-S600_ADJ
Replaced parts
Block
Mounted parts
Board
replacement
replacement
replacement
Adjusting item
Adjustment
AF illumination LED
LCD unit
(Timing gen., CCD signal process)
(Internal memory) (Note 3)
LED901
LCD901
IC301
IC203
Flash unit
LED
LCD block
SY-145 board
SY-145 board
SY-145 board
CAMERA adjustment 1
Flange back adj.
z
z
CAMERA adjustment 2
Flange back check
z
z
F No. compensation
Measure gain adj.
Mechanical shutter adj.
Light value adj.
AWB 3200K-5800K standard data input
AWB 3200K-5800K check
Color reproduction adj. & check
CCD linearity check
CCD white defect compensation check
CCD black defect compensation check
CAMERA adjustment 4
Strobe adj.
z
z
z
z
CAMERA adjustment 5
Auto focus illumination check
z
z
V-COM adj.
White Balance adj.
(Note 1)
Initialization of data
z
LCD adjustment
(COMPLETE) (Note 2, 3, 4)
Lens block (Including CD-606 flexible board and CCD imager)
CAMERA adjustment 3
z
z
z
z
1-1. Adjusting items when replacing main parts and boards
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note 1:
The automatic Adjustment Program does not support the “Initialization of data”. Perform it manually.
Note 2:
When replacing the SY-145 board, erase the data in internal memory of the board before replacement.
Note 3:
When replacing the SY-145 board or the IC203 on the SY-145 board, execute formatting and initialize the internal memory
after replacement.
after replacement.
Note 4:
When replacing the SY-145 board, perform “Initial Language Data Check” after replacement.
Table 6-1-1
6-4
DSC-S600_ADJ
1-2. List of service tools
Fig. 6-1-1
Note1:
Personal computer
OS:
Windows98/98SE/Me/2000/XP Home/XP Pro
RAM:
256MB or more recommended
USB:
2.0 recommended (also compatible with 1.1)
Two connectors are required.
Two connectors are required.
Note2:
In using the 9 colors chart on the pattern box PTB-450, adjust the chart size through the procedure shown below so that it
matches to the pattern box PTB-450.
1) Prepare a woody board A of the thickness 5 mm, and paint it mat-black.
2) Fit the 9 colors chart in the woody board A, and secure the chart with a black tape, etc. to shield the light.
matches to the pattern box PTB-450.
1) Prepare a woody board A of the thickness 5 mm, and paint it mat-black.
2) Fit the 9 colors chart in the woody board A, and secure the chart with a black tape, etc. to shield the light.
Personal computer
(Note 1)
(Note 1)
J-1
J-10
J-9
J-7
HASP key and application
for adjustment (SEUS)
for adjustment (SEUS)
Contact our service headquater of each area
how to get the application for adjustment
(SEUS) and HASP key.
how to get the application for adjustment
(SEUS) and HASP key.
J-2
Pattern box PTB-450
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-4
Clear chart
For PTB-450:
J-6080-621-A
J-6080-621-A
For PTB-1450:
J-6082-560-A
J-6082-560-A
J-6
Minipattern box
J-6082-353-B
J-6082-353-B
Siemens star chart
J-6080-875-A
J-6080-875-A
Back ground paper
J-2501-130-A
J-2501-130-A
J-11
Connection cord
DK-2AA
1-830-351-11
DK-2AA
1-830-351-11
9 colors chart (Note 2)
For PTB-1450:
J-6082-562-A
J-6082-562-A
J-5
J-8
Flange back
adjustment jig
J-6082-563-A
adjustment jig
J-6082-563-A
USB cable
1-827-038-11
1-827-038-11
J-3
AC power adaptor
AC-LS5
1-479-284-12
AC-LS5
1-479-284-12
J-12
Fig. 6-1-2
360 mm
155 mm
280 mm
woody boad A
woody boad A
9 colors chart
135 mm
6-5
DSC-S600_ADJ
Fig. 6-1-4
6-1. CAMERA SECTION ADJUSTMENTS
1-1.
PREPARATIONS BEFORE ADJUSTMENTS
1-1-1.
Preparations
1) Connect the equipment for adjustments according to Fig. 6-1-4.
2) Start up the application for adjustment (SEUS).
2) Start up the application for adjustment (SEUS).
Note:
Before perform the adjustment, set the following data.
1) Select page: 40, address: 38 and set data: 00.
1) Select page: 40, address: 38 and set data: 00.
Fig. 6-1-3
PC
(The SEUS must be installed in the PC.)
OS: Windows 98/98SE/Me/2000/XP
RAM: 256MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
RAM: 256MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
AC IN
AC power adaptor
AC-LS5
(1-479-284-12)
AC-LS5
(1-479-284-12)
Insert the connection cord
DK-2AA (1-830-351-11)
DK-2AA (1-830-351-11)
.
To USB
connector
connector
HASP Key
To USB connector
To USB connector
USB cable
(1-827-038-11)
Pattern box
Front of the lens
L = About 9 cm
L
Camera
6-6
DSC-S600_ADJ
1-1-3.
Precautions
1.
Setting the Switch
Unless otherwise specified, set the switches as follows and per-
form adjustments.
1. Mode switch ....................................... CAMERA
2. ZOOM switch .................................... WIDE end
3. Digital Zoom (SET UP setting) ......... Off
4. Camera (Menu items) ........................ Auto
form adjustments.
1. Mode switch ....................................... CAMERA
2. ZOOM switch .................................... WIDE end
3. Digital Zoom (SET UP setting) ......... Off
4. Camera (Menu items) ........................ Auto
2.
Subjects
1) 9 colors chart (Standard picture frame).
When performing adjustments using the 9 colors chart, adjust
the picture frame as shown in Fig. 6-1-5. (Standard picture
frame)
the picture frame as shown in Fig. 6-1-5. (Standard picture
frame)
2) Clear chart (Standard picture frame)
Remove the 9 colors chart from the pattern box and insert a
clear chart in its place. (Do not perform zoom operations dur-
ing this time)
clear chart in its place. (Do not perform zoom operations dur-
ing this time)
Fig. 6-1-5
9 colors chart (Standard picture frame)
Adjust the camera position and direction
to obtain the LCD screen shown in Fig. a.
to obtain the LCD screen shown in Fig. a.
Fig. a LCD screen
A
C
C
Effective picture frame
White
Green
Yellow
W14
Red
Magenta
Cyan
Blue
B
C14
A
2
2
B
A
A = B
C14 : Filter for AWB 5800K adjustment
C =
B
3
Transparent window
Click on the first or last page to see other DSC-S600 (serv.man12) service manuals if exist.