Sony DSC-S60 / DSC-S80 / DSC-S90 / DSC-ST80 Service Manual ▷ View online
SERVICE MANUAL
LEVEL
3
Revision History
Revision History
Link
FRAME SCHEMATIC DIAGRAM
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SERVICE NOTE
FRAME SCHEMATIC DIAGRAM
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SERVICE NOTE
Link
How to use
Acrobat Reader
How to use
Acrobat Reader
Sony EMCS Co.
DSC-S60/S80/S90/ST80
The information that is not described in this Service Manual is described
in the LEVEL 2 Service Manual.
When repairing, use this manual together with LEVEL 2 Service Manual.
in the LEVEL 2 Service Manual.
When repairing, use this manual together with LEVEL 2 Service Manual.
• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (9-876-869-51).
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (9-876-869-42).
• This service manual contains information for Japanese model as well.
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (9-876-869-42).
• This service manual contains information for Japanese model as well.
• Reference No. search on printed wiring boards is available.
• Method for Copying or Erasing the Data in Internal Memory
DIGITAL STILL CAMERA
2007J0500-1
© 2007.10
Published by Kohda TEC
9-876-869-11
Ver. 1.2 2007.10
Contents of LEVEL 2 Service Manual
1. SERVICE NOTE
2. DISASSEMBLY
3. BLOCK DIAGRAMS
OVERALL
POWER
4. PRINTED WIRING BOARDS AND
CD-573, SW-446, ST-122,
SCHEMATIC DIAGRAMS
MC-153, MS-271
CONTROL SWITCH
BLOCK
5. REPAIR PARTS LIST
EXPLODED VIEWS
ELECTRICAL PARTS LIST
DSC-S60/S80/S90/ST80
Photo: DSC-S90/Silver
DSC-S60/S90
US Model
Canadian Model
Chinese Model
Tourist Model
DSC-S60/S80/S90/
ST80
AEP Model
UK Model
E Model
Hong Kong Model
DSC-S60/S80/S90
Australian Model
Korea Model
DSC-S90
Argentine Model
— 2 —
DSC-S60/S80/S90/ST80
TABLE OF CONTENTS
1.
SERVICE NOTE
1-5.
Method for Copying or Erasing the Data in Internal
Memory ··········································································· 1-3
Memory ··········································································· 1-3
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
4-1.
Frame Schematic Diagram ·············································· 4-1
4-2.
Schematic Diagrams ························································ 4-5
CH-169 (CCD SIGNAL PROCESS) ······························ 4-9
SY-126 (1/8) (CAMERA MODULE) ··························· 4-11
SY-126 (2/8) (CAMERA DSP, CPU) ···························· 4-13
SY-126 (3/8) (LENS DRIVE) ······································· 4-15
SY-126 (4/8) (BURST FLASH, SDRAM) ···················· 4-17
SY-126 (5/8) (AND FLASH) ········································ 4-19
SY-126 (6/8) (AUDIO) ·················································· 4-21
SY-126 (7/8) (DC/DC CONVERTER) ·························· 4-23
SY-126 (8/8) (CONNECTOR) ······································ 4-25
CH-169 (CCD SIGNAL PROCESS) ······························ 4-9
SY-126 (1/8) (CAMERA MODULE) ··························· 4-11
SY-126 (2/8) (CAMERA DSP, CPU) ···························· 4-13
SY-126 (3/8) (LENS DRIVE) ······································· 4-15
SY-126 (4/8) (BURST FLASH, SDRAM) ···················· 4-17
SY-126 (5/8) (AND FLASH) ········································ 4-19
SY-126 (6/8) (AUDIO) ·················································· 4-21
SY-126 (7/8) (DC/DC CONVERTER) ·························· 4-23
SY-126 (8/8) (CONNECTOR) ······································ 4-25
4-3.
Printed Wiring Boards ··················································· 4-35
SY-126 ··········································································· 4-39
CH-169 ·········································································· 4-39
SY-126 ··········································································· 4-39
CH-169 ·········································································· 4-39
4-4.
Waveforms ····································································· 4-49
4-5.
Mounted Parts Location ················································ 4-51
5.
REPAIR PARTS LIST
5-2.
Electrical Parts List ························································· 5-6
Section
Title
Page
1-3
DSC-S60/S80/S90/ST80
The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.)
Note: 1
When replacing the SY-126 board, erase the data in internal memory of the board before replacement.
Note: 2
When replacing the SY-126 board or the IC301 on the SY-126 board, execute formatting and initialize the internal memory after
replacement.
replacement.
Method for Copying the Data in Internal Memory
Method for Formatting the Internal Memory
Copies all images in the internal memory to a “Memory Stick”.
1 Insert a “Memory Stick” having 32 MB or larger capacity.
2 Select [OK] with v on the control button, then press z.
2 Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be copied Ready?” appears.
3 Select [OK] with v, then press z.
Copying starts.
• Use batteries with enough capacity or the AC Adaptor (not supplied). If you attempt to copy image files
using batteries with little remaining charge, the batteries may run out, causing copying to fail or possibly
corrupting the data.
corrupting the data.
• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the
• The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the “Memory Stick” after copying, then execute the [Format] command in
Internal Memory Tool.
• You cannot select a folder copied on a “Memory Stick”.
• The setting of
(Print order) marks is not copied even when you copy data.
Copy
OK
See the following procedure.
Cancel
Cancels the copying.
Copying
102_COPY
Formats the internal memory.
• Note that formatting irrevocably erases all data in the internal memory, including even protected images.
1
Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be erased Ready?” appears.
The message “All data in internal memory will be erased Ready?” appears.
2
Select [OK] with v, then press z.
The format is complete.
The format is complete.
Format
OK
See the following procedure.
Cancel
Cancels the formatting.
1-5. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
1. SERVICE NOTE
DSC-S60/S80/S90/ST80
:S90
:S60/S80/ST80
2P
CN703
1
MIC_GND
2
MIC_SIG
4P
CN001
1
2
3
4
39P
CN001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
39P
CN401
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
27P
CN601
1
ZOOM_B
2
ZOOM_A
3
ZOOM_B
4
ZOOM_A
5
TEMP_GND
6
TEMP_OUT
7
Z_RST_GND1
8
Z_RST_SENS1
9
Z_RST_VCC1
10
IRIS_S_-
11
IRIS_S_+
12
IRIS_M_-
13
IRIS_M_+
14
SHUTTER-
15
SHUTTER-
16
SHUTTER+
17
SHUTTER+
18
F_RST_SENS
19
F_RST_GND
20
F_RST_VCC
21
FOCUS_B
22
FOCUS_A
23
FOCUS_B
24
FOCUS_A
25
Z_RST_VCC2
26
Z_RST_GND2
27
Z_RST_SENS2
33P
CN706
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
33P
CN005
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
39P
CN003
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
6P
CN004
1
2
3
4
5
6
10P
CN702
1
2
3
4
5
6
7
8
9
10
45P
CN701
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
32P
CN002
1
3
5
7
9
11
13
15
17
2
4
6
8
10
12
14
16
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
14P
CN704
1
2
3
4
5
6
7
8
9
10
11
12
13
14
16P
CN705
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
16P
CN004
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
BT001
CN002 10P
1
VSS
2
BS
3
DATA1
4
SDIO/DATA0
5
DATA2
6
INT
7
DATA3
8
SCLK
9
VCC
10
VSS
CCD
BATT_UNREG
BATT_UNREG
BATT_GND
BATT_GND
N.C.
BL_L
BL_H
N.C.
FP-199
V5B
VSUB_CONT
H1A
V3B
CAM_-7.5V_CD
POWER_SA
VE
XAE_LOCK_LED
GND
GND
GND
GND
GND
GND
GND
V1
V2
GND
VHLD
GND
SHT
V3A
VST
GND
V5A
GND
H2A
H1B
GND
D_3.2V
RG
CCD_OUT
V6
GND
GND
V4
H2B
CAM_15.0V_CD
CAM_15.0V_CD
XSTRB_LED
GND
VSUB_CONT
XAE_LOCK_LED
GND
GND
VST
RG
H1B
V5B
POWER_SA
VE
GND
V2
V3A
CAM_15.0V_CD
D_3.2V
H2B
GND
V6
H2A
CAM_-7.5V_CD
GND
V1
SHT
GND
V3B
GND
GND
GND
V5A
XSTRB_LED
CAM_15.0V_CD
V4
H1A
GND
GND
GND
VHLD
GND
CCD_OUT
ACV_GND
VL_3V
KEY_AD1_C
ACV_GND
ACV_GND
AU_OUT
KEY_AD2_C
V_BATT
D-
ACV_UNREG
ACV_UNREG
BATT_UNREG
D+
BATT_UNREG
USB_GND
ACV_UNREG
ACV_UNREG
A_GND
USB_GND
ACV_UNREG
ACV_GND
V_GND
SP-
ACV_UNREG
SP+
XMULTI_IN
XACV_IN
X_K.BATT
ACV_UNREG
ACV_GND
ACV_GND
XAV_JACK_IN
USB_VBUS
BATT_UNREG
BATT_UNREG
ACV_GND
V_TH
V_OUT
BATT_UNREG
ACV_GND
X_CGH_ON
NC
CRADLE_ON
ACV_GND
V_TH
X_CGH_ON
NC(UART_SO)
KEY_AD1_C
NC(UART_SI)
V_OUT
BATT_UNREG
X_K.BATT
XCAM_IN
XAV_JACK_IN
BATT_UNREG
ACV_UNREG
ACV_UNREG
ACV_GND
XACV_IN
USB_GND
D-
ACV_GND
NC
USB_VBUS
CRADLE_ON
D+
V_BATT
V_GND
A_OUT
XMULTI_IN
KEY_AD2_C
NC
ACV_GND
NC(XLANC_PWR_ON)
A_GND
USB_GND
A_3.2V
A_3.2V
XAE_LOCK_SW
XPWR_LED
XSHTR_SW
MODE_DIAL1
N.C.
MODE_DIAL0
REG_GND
XPWR_ON
MS_CLK
XMS_IN
BA
TT_TMP
REG_GND
X_K.BA
TT
REG_GND
MS_VCC
MS_D0
REG_GND
MS_D2
REG_GND
MS_D3
MS_D1
MS_BS
BA
TT_TMP
MS_VCC
REG_GND
REG_GND
MS_D1
REG_GND
MS_CLK
X_K.BA
TT
MS_D2
MS_D0
MS_BS
XMS_IN
REG_GND
MS_D3
STRB_ON
ST_UNREG
ST_5V
ST_GND
ST_GND
STRB_CHG_CONT
STRB_CHG
D_3.2V
ST_GND
XAF_LED
ST_UNREG
XSTRB_FULL
ST_UNREG
ST_GND
D2
XCS
REG_GND
BL_L
SCLK
REG_GND
SI
KEY_AD1
REG_GND
D1
VSYNC
REG_GND
PA
NEL_15V/NC
D0
HSYNC
BL_H
D7
REG_GND
REG_GND
REG_GND
REG_GND
D3
D4
D6
P_ADJ
PA
NEL_AD
KEY_AD0
XRESET
XACCESS_LED
REG_GND
D5
D_3.2V
DCLK
BL_H
BL_L
REG_GND
REG_GND
REG_GND
REG_GND
NC
SP901
MC-153
(MULTI CONNECTOR)
SPEAKER
BATTERY
FLEXIBLE BOARD
LITHIUM
BATTERY
TERMINAL
BT901
MIC901
MIC
CONTROL
BLOCK
SWITCH
FLEXIBLE
BOARD
(FLASH DRIVE)
FP-201 FLEXIBLE
ST-122
CD-573
BOARD
(CCD IMAGER)
BLOCK
LENS
SY-126 BOARD
PROCESS
CH-169
(3/8) (LENS DRIVE)
(8/8) (CONNECTOR)
BOARD
(2/8) (CAMERA DSP, CPU)
(7/8) (DC/DC CONVERTER)
(6/8) (AUDIO)
(4/8) (BURST FLASH, SDRAM)
(5/8) (AND FLASH)
(5/8) (AND FLASH)
(1/8) (CAMERA MODULE)
CP401
CCD SIGNAL
11
12
MEMORY STICK
BOARD
MS-271
CONNECTOR
MEMORY STICK
MEMORY
STICK
FP-200 FLEXIBLE
COLOR LCD PANEL
LCD901
2.5 INCH
2.0 INCH
(CONTROL SWITCH, LCD PANEL)
SW-446 BOARD
BACKLIGHT
D901
FLEXIBLE
05
TO AV/USB MULTI CABLE OR CRADLE
(MULTI CONNECTOR)
NC
NC
VSS
NC
NC
VVCOM
COMOUT
NC
VGL
C2-
C2+
NC
NC
NC
VDC
NC
VDD
VCOMDC
VSH
VBC
D0
D1
D2
D3
D4
D5
D6
D7
DCLK
HSYNC
VSYNC
SCLK
SI
XCS
XRESET
VSS
VR2
NC
VCOM
KEY_AD0
XACCESS_LED
REG_GND
D7
REG_GND
REG_GND
BL_H
D_3.2V
D6
PA
NEL_AD
XRESET
D5
REG_GND
P_ADJ
REG_GND
HSYNC
D4
D0
D2
XCS
REG_GND
BL_L
D3
SCLK
REG_GND
REG_GND
SI
P
ANEL_15V
DCLK
KEY_AD1
REG_GND
D1
VSYNC
4-1
4-2
4-1. FRAME SCHEMATIC DIAGRAM
4. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
FRAME
Ver 1.1 2005.07
