Sony DSC-S40 (serv.man2) Service Manual ▷ View online
DSC-S40
2. DISASSEMBLY
2. DISASSEMBLY
1
Insert the plate of lens cover motor
in the slot on the front cabinet.
in the slot on the front cabinet.
4
Insert the flexible board
in the slot on the front cabinet.
in the slot on the front cabinet.
2
Insert the gear of lens cover motor,
as you don't collide with the gear of
lens cover.
as you don't collide with the gear of
lens cover.
FP-176 flexible board
6
Check that the FP-176 flexible board has fitted into
four claws and four bosses exactly.
four claws and four bosses exactly.
3
As you make the rotate the lens ring
in the direction of arrow,
engage with the gear of lens cover motor.
in the direction of arrow,
engage with the gear of lens cover motor.
Gear (lens cover motor)
Lens ring
7
P2 tapping screw
Claw
Claw
Boss
Boss
Boss
Boss
Claw
Claw
5
Assemble after pushing up the S002
of FP-176 flexible board upwards.
If it assembles then, the tip of S002
will break.
of FP-176 flexible board upwards.
If it assembles then, the tip of S002
will break.
S002
(Close detect switch)
(Close detect switch)
precision screw driver, etc.
2-3. THE METHOD OF ATTACHMENT OF FP-176 FLEXIBLE BOARD
2-7
2-8
2-9E
DSC-S40
2. DISASSEMBLY
2. DISASSEMBLY
2-4. CIRCUIT BOARDS LOCATION
CH-169
(included in SY-116)
(included in SY-116)
CD-575
(included in Lens Block Assy)
(included in Lens Block Assy)
FP-176 flexible
ST-116
SY-116
(including CH-169)
(including CH-169)
SW-437
Control switch block
(RL51320)
(RL51320)
MS-259 flexible
Board Name
Function
CH-169
CCD SIGNAL PROCESS
(included in SY-116)
CD-575
CD-575
CCD IMAGER
(included in
Lens Block Assy)
FP-176 flexible
Lens Block Assy)
FP-176 flexible
LENS COVER MOTOR
MS-259 flexible
MEMORY STICK CONNECTOR
ST-116
FLASH DRIVE
SW-437
CONTROL SWITCH
SY-116
CAMERA MODULE, CAMERA DSP, CPU,
(
CH-169 board))
LENS DRIVE, BURST FLASH, SDRAM,
AND FLASH, AUDIO, DC/DC CONVERTER,
CONNECTOR, LCD PANEL
AND FLASH, AUDIO, DC/DC CONVERTER,
CONNECTOR, LCD PANEL
Ver 1.1 2005.06
HELP
DSC-S40
CD-575 Flexible board
CD-575 Flexible board
Radiation sheet (CD)
When affixing the radiation sheet (CD), take care not to apply excessive force to the sheet (CD)
because the chip parts mounted on the CD-575 flexible board could be peeled off.
because the chip parts mounted on the CD-575 flexible board could be peeled off.
Radiation sheet (CDL)
When turning over the CD-575 flexible board to affix the radiation sheet (CDL),
take care not to turn it over strongly
because the chip parts mounted on the CD-575 flexible board could be peeled off.
take care not to turn it over strongly
because the chip parts mounted on the CD-575 flexible board could be peeled off.
HELP
Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
DSC-S40
Link
Link
3. BLOCK DIAGRAMS
OVERALL BLOCK DIAGRAM (2/2)
POWER BLOCK DIAGRAM
OVERALL BLOCK DIAGRAM (1/2)
OVERALL BLOCK DIAGRAM (2/2)
POWER BLOCK DIAGRAM
OVERALL BLOCK DIAGRAM (1/2)
Click on the first or last page to see other DSC-S40 (serv.man2) service manuals if exist.