Sony DSC-S40 (serv.man15) Service Manual ▷ View online
6-2
DSC-S40
Method for Copying or Erasing the Data in Internal Memory
The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the
internal memory.)
internal memory.)
Method for copying the data in internal memory
Method for formatting the internal memory
Copies all images in the internal memory to a “Memory Stick”.
1 Insert a “Memory Stick” having 32 MB or larger capacity.
2 Select [OK] with v on the control button, then press z.
2 Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be copied Ready?” appears.
3 Select [OK] with v , then press z.
Copying starts.
• Use batteries with enough capacity or the AC Adaptor (not supplied). If you attempt to copy image files
using batteries with little remaining capacity, the batteries may run out, causing copying to fail or possibly
corrupting the data.
corrupting the data.
• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the
• The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the “Memory Stick” after copying, then execute the [Format] command in
Internal Memory Tool
• You cannot select a folder copied on a “Memory Stick”.
• The setting of
• The setting of
(Print order) marks is not copied even when you copy data.
Copy
OK
See the following procedure.
Cancel
Cancels the copying.
Copying
102_COPY
This item does not appear when a “Memory Stick” is inserted in the camera.
The default settings are marked with
The default settings are marked with
.
Formats the internal memory.
Note that formatting irrevocably erases all data in the internal memory, including even protected images.
1
Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be erased Ready?” appears.
The message “All data in internal memory will be erased Ready?” appears.
2
Select [OK] with v, then press z.
The format is complete.
The format is complete.
Format
OK
See the following procedure.
Cancel
Cancels the formatting.
Note 1:
When replacing the SY-116 board, erase the data in internal memory of the board before replacement.
Note 2:
When replacing the SY-116 board or the IC1401 on the SY-116 board, execute formatting and initialize
the internal memory after replacement.
the internal memory after replacement.
6-3
DSC-S40
1-1. Adjusting items when replacing main parts and boards
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note 1:
The automatic Adjustment Program does not support the “Initialization of data”. Perform it manually.
Note 2:
Use the AWB Adjustment Program (S40AwbAdjustment.exe).
Note 3:
When replacing the SY-116 board, erase the data in internal memory of the board before replacement.
Note 4:
When replacing the SY-116 board or the IC1401 on the SY-116 board, execute formatting and initialize the internal memory
after replacement.
after replacement.
Table 6-1-1
Replaced parts
Block
Mounted parts
Board
replacement
replacement
replacement
Adjusting item
Adjustment
LCD unit
Back light unit
(AF illumination LED)
(Timing gen., CCD signal process)
(Camera DSP)
(32M AND flash) (Note 4)
(Including CD-575 flexible board (CCD imager))
LCD901
D901
D001
IC101
IC1001
IC1401
(COMPLETE)
(COMPLETE)
(COMPLETE)
(COMPLETE) (Note 3, 4)
Lens block
Flash unit
LCD block
LCD block
FP-176 board
CH-169 board
SY-116 board
SY-116 board
FP-176 board
CH-169 board
ST-116 board
SY-116 board
(Note 1)
Initialization of data
z
CAMERA adjustment 1
Flange back adj.
z
z
CAMERA adjustment 2
Flange back check
z
z
F No. compensation
Measure gain adj.
Mechanical shutter adj.
Light value adj.
(Note 2)
AWB 3200K-5800K standard data input
z
z
z
z
Color reproduction adj. & check
CCD linearity check
CCD white defect compensation check
CCD black defect compensation check
Strobe adj.
Auto focus illumination check
V-COM AC adj.
V-COM adj.
White Balance adj.
z
z
z
z
CAMERA adjustment 4
CAMERA adjustment 3
z
z
CAMERA adjustment 5
z
z
z
z
z
z
z
z
z
z
LCD adjustment
z
z
z
z
6-4
DSC-S40
6-1. CAMERA SECTION ADJUSTMENTS
1-1.
PREPARATIONS BEFORE ADJUSTMENTS
1-1-1.
List of Service Tools
•
AC power adapter
Fig. 6-1-1
Note1:
Personal computer
OS:
OS:
Windows98/98SE/Me/2000/XP Home/XP Pro
RAM:
256MB or more recommended
USB:
2.0 recommended (also compatible with 1.1)
Two connectors are required.
Two connectors are required.
Note2:
In using the 9 colors chart on the pattern box PTB-450, adjust the chart size through the procedure shown below so that it
matches to the pattern box PTB-450.
1) Prepare a woody board A of the thickness 5 mm, and paint it mat-black.
2) Fit the 9 colors chart in the woody board A, and secure the chart with a black tape, etc. to shield the light.
matches to the pattern box PTB-450.
1) Prepare a woody board A of the thickness 5 mm, and paint it mat-black.
2) Fit the 9 colors chart in the woody board A, and secure the chart with a black tape, etc. to shield the light.
Personal computer
(Note 1)
(Note 1)
J-1
J-10
J-9
J-7
HASP key and application
for adjustment (SEUS)
for adjustment (SEUS)
Contact our service headquater of each area
how to get the application for adjustment
(SEUS) and HASP key.
how to get the application for adjustment
(SEUS) and HASP key.
J-2
Pattern box PTB-450
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-4
Clear chart
For PTB-450:
J-6080-621-A
J-6080-621-A
For PTB-1450:
J-6082-560-A
J-6082-560-A
J-6
Minipattern box
J-6082-353-B
J-6082-353-B
Siemens star chart
J-6080-875-A
J-6080-875-A
Back ground paper
J-2501-130-A
J-2501-130-A
J-10
Connection cord
DK-2AA
1-830-351-11
DK-2AA
1-830-351-11
9 colors chart (Note 2)
For PTB-1450:
J-6082-562-A
J-6082-562-A
J-5
J-8
Flange back
adjustment jig
J-6082-563-A
adjustment jig
J-6082-563-A
USB cable
1-829-579-21
1-829-579-21
J-3
Fig. 6-1-2
360 mm
155 mm
280 mm
woody boad A
woody boad A
9 colors chart
135 mm
6-5
DSC-S40
Fig. 6-1-4
1-1-2.
Preparations
1) Connect the equipment for adjustments according to Fig. 6-1-4.
2) Start up the application for adjustment (SEUS).
2) Start up the application for adjustment (SEUS).
Fig. 6-1-3
Front of the lens
L = About 9 cm
L
Pattern box
PC
(The SEUS must be installed in the PC.)
OS: Windows 98/98SE/Me/2000/XP
RAM: 256MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
RAM: 256MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
Two connectors are required.
AC IN
AC power adaptor
Insert the connection cord
DK-2AA (1-830-351-11)
DK-2AA (1-830-351-11)
.
To USB
connector
connector
HASP Key
To USB connector
To USB connector
USB cable
(1-829-579-21)