Sony DSC-S30 / DSC-S50 (serv.man3) Service Manual ▷ View online
– 13 –
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
3-1-3. REAR CABINET SECTION
The components identified by mark
0 or dotted line with mark 0 are
critical for safety.
Replace only with part number speci-
fied.
critical for safety.
Replace only with part number speci-
fied.
101
108
102
103
104
106
107
108
133
109
131
130
129
134
128
127
135
126
125
124
123
108
122
105
110
120
121
110
115
113
119
115
116
118
136
117
110
111
112
113
114
not
supplied
supplied
LCD901
ND901
A
A
132
101
3-061-079-01 COVER (T), HINGE
* 102
3-061-083-01 CLIP, KJ
103
not supplied
KJ-11 BOARD, COMPLETE
104
1-960-474-11 HARNESS (SK-100)
* 105
3-061-082-01 HOLDER, KJ
106
X-3950-657-1 HINGE ASSY
107
3-061-084-01 COVER (B), HINGE
108
3-061-216-01 ACE (M1.7), SPECIAL HEAD LOCK
109
X-3950-658-1 CABINET (REAR) ASSY (S50)
109
X-3950-794-1 CABINET (REAR) ASSY (S30)
110
3-968-729-91 SCREW (M2), LOCK ACE, P2
111
3-061-080-01 CABINET (REAR), P
0 112
not supplied
TRANSFORMER UNIT, INVERTER
* 113
3-051-232-01 CLIP, PCB
114
3-914-366-01 SCREW (DIA. 1.7X4), PRECISION
115
3-989-735-51 SCREW (M1.7), LOCK ACE, P2
116
3-973-497-91 SCREW (M1.7), 0-NO. +P 2
117
3-061-078-01 CABINET (FRONT), P
* 118
3-061-081-01 PLATE, BL FIXED
119
not supplied
PD-127 BOARD, COMPLETE (S50)
119
not supplied
PD-127 BOARD, COMPLETE (S30)
120
1-960-472-11 HARNESS (YP-053)
121
1-960-473-11 HARNESS (YP-054)
122
3-060-299-12 KNOB, POWER
123
3-318-382-02 SCREW (1.7), TAPPING
124
3-061-108-01 HOLDER, LOCK
125
3-061-107-01 LEVER, LOCK
126
3-061-109-01 SPRING, LOCK
127
3-959-978-02 CUSHION, PANEL
128
3-061-096-01 LID, JK
129
3-051-520-01 SPRING, POWER
130
3-060-297-01 HOLDER, POWER
131
3-061-111-01 COVER, DC
* 132
3-062-825-01 SHEET, KJ
* 133
3-062-736-01 SHEET, ELECTROSTATIC
134
3-061-113-01 HOLDER, SLIDE KNOB
135
3-061-112-01 KNOB, SLIDE
136
3-060-295-01 SHEET (BL)
LCD901 not supplied
INDICATOR MODULE LIQUID CRYSTAL
0 ND901
not supplied
TUBE, FLUORESCENT, COLD CATHODE
Ver 1.3 2004. 07
– 14 –
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
3-1-4. LENS BLOCK ASSEMBLY
151
not supplied
LENS, ZOOM (VCL-6103WA)
154
3-061-122-01 SHEET, LENS
155
3-061-121-01 FRAME (260), LENS
156
3-914-366-01 SCREW (DIA. 1.7X4), PRECISION
157
1-678-001-11 FP-023 FLEXIBLE BOARD
158
3-947-268-11 TITE (2), +B TAPPING (P)
159
not supplied
CD-262 BOARD, COMPLETE (S50)
159
not supplied
CD-262 BOARD, COMPLETE (S30)
160
not supplied
RUBBER (CL), SEAL
161
not supplied
FILTER BLOCK, OPTICAL (S30)
161
not supplied
FILTER BLOCK, OPTICAL (S50)
162
not supplied
ADAPTOR (CL), CCD FITTING
IC301
not supplied
CCD BLOCK ASSY (CCD IMAGER) (S30)
IC301
not supplied
CCD BLOCK ASSY (CCD IMAGER) (S50)
M901
3-709-573-01 MOTOR UNIT, FOCUS
M902
3-709-574-01 MOTOR UNIT, ZOOM
151
154
155
156
156
162
161
160
159
158
157
M901
M902
IC301
– 15 –
4. GENERAL
DSC-S30/S50
This section is extracted from DSC-S30/S50
instruction manual.
instruction manual.
2
To prevent fire or shock hazard, do
not expose the unit to rain or
not expose the unit to rain or
moisture.
Never expose the battery pack to
temperature above 140˚F (60˚C), such as in
a car parked in the sun or under direct
sunlight.
temperature above 140˚F (60˚C), such as in
a car parked in the sun or under direct
sunlight.
If you have any questions about this
product, you may call:
product, you may call:
Sony Customer Information Center
1-800-222-SONY (7669)
1-800-222-SONY (7669)
or write to:
Sony Customer Information Center
1 Sony Drive, Mail Drop #T1-11, Park
Ridge, NJ 07656
1 Sony Drive, Mail Drop #T1-11, Park
Ridge, NJ 07656
CAUTION
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
WARNING
For the Customers in the
U.S.A.
U.S.A.
This symbol is intended to
alert the user to the presence
of uninsulated “dangerous
voltage” within the
product’s enclosure that
may be of sufficient
magnitude to constitute a
risk of electric shock to
persons.
alert the user to the presence
of uninsulated “dangerous
voltage” within the
product’s enclosure that
may be of sufficient
magnitude to constitute a
risk of electric shock to
persons.
This symbol is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the
appliance.
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the
appliance.
Declaration of Conformity
Trade Name:
SONY
Model No.:
DSC-S30
Responsible Party:Sony Electronics Inc.
Address:
Address:
1 Sony Drive, Park
Ridge, NJ 07656
USA
Ridge, NJ 07656
USA
Telephone No.:
201-930-6972
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This
device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
FCC Rules. Operation is subject to the
following two conditions: (1) This
device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
Declaration of Conformity
Trade Name:
SONY
Model No.:
DSC-S50
Responsible Party:Sony Electronics Inc.
Address:
Address:
1 Sony Drive, Park
Ridge, NJ 07656
USA
Ridge, NJ 07656
USA
Telephone No.:
201-930-6972
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This
device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
FCC Rules. Operation is subject to the
following two conditions: (1) This
device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
3
Note:
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct
the interference by one or more of the
following measures:
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct
the interference by one or more of the
following measures:
— Reorient or relocate the receiving
antenna.
— Increase the separation between the
equipment and receiver.
— Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
the receiver is connected.
— Consult the dealer or an experienced
radio/TV technician for help.
The shielded interface cable recommended
in this manual must be used with this
equipment in order to comply with the limits
for a digital device pursuant to Subpart B of
Part 15 of FCC Rules.
in this manual must be used with this
equipment in order to comply with the limits
for a digital device pursuant to Subpart B of
Part 15 of FCC Rules.
DISPOSAL OF LITHIUM ION
BATTERY.
LITHIUM ION BATTERY.
DISPOSE OF PROPERLY.
BATTERY.
LITHIUM ION BATTERY.
DISPOSE OF PROPERLY.
You can return your unwanted lithium ion
batteries to your nearest Sony Service
Center or Factory Service Center.
batteries to your nearest Sony Service
Center or Factory Service Center.
Note:
In some areas the disposal of lithium ion
batteries in household or business trash may
be prohibited.
batteries in household or business trash may
be prohibited.
For the Sony Service Center nearest you call
1-800-222-SONY (United States only)
For the Sony Factory Service Center nearest
you call 416-499-SONY (Canada only)
1-800-222-SONY (United States only)
For the Sony Factory Service Center nearest
you call 416-499-SONY (Canada only)
Caution:
Do not handle damaged or leaking lithium
ion battery.
ion battery.
CAUTION
TO PREVENT ELECTRIC SHOCK, DO
NOT USE THIS POLARIZED AC PLUG
WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE
EXPOSURE.
NOT USE THIS POLARIZED AC PLUG
WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE
EXPOSURE.
A moulded plug complying with BS 1363 is
fitted to this equipment for your safety and
convenience.
fitted to this equipment for your safety and
convenience.
Should the fuse in the plug supplied need to
be replaced, a 5 AMP fuse approved by
ASTA or BSI to BS 1362, (i.e. marked with
be replaced, a 5 AMP fuse approved by
ASTA or BSI to BS 1362, (i.e. marked with
or
mark) must be used.
If the plug supplied with this equipment has
a detachable fuse cover, be sure to attach the
fuse cover after you change the fuse. Never
use the plug without the fuse cover. If you
should lose the fuse cover, please contact
your nearest Sony service station.
a detachable fuse cover, be sure to attach the
fuse cover after you change the fuse. Never
use the plug without the fuse cover. If you
should lose the fuse cover, please contact
your nearest Sony service station.
Directive:EMC Directive 89/336/EEC.92/
31/EEC
This equipment complies with the EMC
regulations when used under the following
circumstances:
regulations when used under the following
circumstances:
•
Residential area
•
Business district
•
Light-industry district
(This equipment complies with the EMC
standard regulations EN55022 Class B.)
standard regulations EN55022 Class B.)
For the Customers in Canada
NOTICE FOR THE
CUSTOMERS IN THE UNITED
KINGDOM
CUSTOMERS IN THE UNITED
KINGDOM
For the Customers in
Germany
Germany
4
The electromagnetic fields at the specific
frequencies may influence the picture and
sound of this camera.
frequencies may influence the picture and
sound of this camera.
For the Customers in CANADA
This Class B digital apparatus complies with
Canadian ICES-003.
Canadian ICES-003.
For the Customers in the
U.S.A.
U.S.A.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
• This Owner's Manual is for the two
models of the DSC-S30 and the
DSC-S50. Check to make sure which
model you have purchased before
you use your camera.
DSC-S50. Check to make sure which
model you have purchased before
you use your camera.
• The illustrations in this manual
show the DSC-S50.
Trial recording
Before you record one-time events, you may
want to make a trial recording to make sure
that the camera is working correctly.
want to make a trial recording to make sure
that the camera is working correctly.
No compensation for contents of
the recording
the recording
Contents of the recording cannot be
compensated for if recording or playback is
not possible due to a malfunction of your
camera, etc.
compensated for if recording or playback is
not possible due to a malfunction of your
camera, etc.
Notes on image data compatibility
•
•
This camera conforms with the Design
Rules for Camera File Systems universal
standard established by the JEIDA (Japan
Electronic Industries Development
Association). You cannot play back on
your camera still images recorded on other
equipment (DCR-TRV890/TRV900/
TRV900E, DSC-D700, DSC-D770) that
does not conform with this universal
standard. (These models are not sold in
some areas.)
Rules for Camera File Systems universal
standard established by the JEIDA (Japan
Electronic Industries Development
Association). You cannot play back on
your camera still images recorded on other
equipment (DCR-TRV890/TRV900/
TRV900E, DSC-D700, DSC-D770) that
does not conform with this universal
standard. (These models are not sold in
some areas.)
•
Playback of images recorded with your
camera on other equipment and playback
of images recorded or edited with other
equipment on your camera are not
guaranteed.
camera on other equipment and playback
of images recorded or edited with other
equipment on your camera are not
guaranteed.
Precaution on copyright
Television programs, films, video tapes, and
other materials may be copyrighted.
Unauthorized recording of such materials
may be contrary to the provision of the
copyright laws.
other materials may be copyrighted.
Unauthorized recording of such materials
may be contrary to the provision of the
copyright laws.
Do not shake or strike the camera
In addition to malfunctions and inability to
record images, this may render the
“Memory Stick” unusable or image data
breakdown, damage or loss may occur.
record images, this may render the
“Memory Stick” unusable or image data
breakdown, damage or loss may occur.
LCD screen and lens
•
•
The LCD screen is manufactured using
high-precision technology. However, there
may be some tiny black points and/or
bright points (red, blue or green in color)
that constantly appear on the LCD screen.
These points are normal in the
manufacturing process and do not affect
the recording in any way. Over 99.99% of
the pixels are operational for effective use.
high-precision technology. However, there
may be some tiny black points and/or
bright points (red, blue or green in color)
that constantly appear on the LCD screen.
These points are normal in the
manufacturing process and do not affect
the recording in any way. Over 99.99% of
the pixels are operational for effective use.
•
Be careful when placing the camera near a
window or outdoors. Exposing the LCD
screen or the lens to direct sunlight for
long periods may cause malfunctions.
window or outdoors. Exposing the LCD
screen or the lens to direct sunlight for
long periods may cause malfunctions.
Do not get the camera wet
When taking pictures outdoors in the rain or
under similar conditions, be careful not to
get the camera wet. If moisture
condensation occurs, refer to page 54 and
follow the instructions on how to remove it
before using the camera.
get the camera wet. If moisture
condensation occurs, refer to page 54 and
follow the instructions on how to remove it
before using the camera.
Back up recommendation
To avoid the potential risk of data loss,
always copy (back up) data to a disk.
always copy (back up) data to a disk.
Attention
“Memory Stick”
Be sure to read the following
before using your camera
before using your camera
N50
6
Getting started
Identifying the parts
See the pages in parentheses for details of operation.
A
Flash (19)
B
MODE selector (29)
C
Shutter button (16) (20)
D
Lens cap
E
Photocell window for flash
Do not block while recording.
F
Self-timer/recording lamp
G
Built-in microphone (DSC-S50
only)
only)
Do not touch while recording.
H
Speaker (DSC-S50 only)
I
Lens
J
A/V OUT jack (DSC-S50 only)
(48)
(48)
Audio output is monaural.
VIDEO OUT jack (DSC-S30
only) (48)
only) (48)
K
USB jack (25) (26)
L
Tripod receptacle (bottom
surface)
surface)
Use a tripod with a screw length of
less than 9/32 inch (6.5 mm). You
will be unable to firmly secure the
camera to tripods having longer
screws, and may damage the
camera.
less than 9/32 inch (6.5 mm). You
will be unable to firmly secure the
camera to tripods having longer
screws, and may damage the
camera.
2
3
4
5
6
7
8
1
9
0
qs
qa
– 16 –
Getting started
7
A
Flash button
B
FOCUS button (41)
C
LCD BACKLIGHT BRIGHT/
NORMAL switch
NORMAL switch
Usually set to NORMAL. When
you use the camera outdoors or in
other bright places, setting this to
BRIGHT makes the LCD screen
bright and easy to see, but also
uses up the battery faster.
you use the camera outdoors or in
other bright places, setting this to
BRIGHT makes the LCD screen
bright and easy to see, but also
uses up the battery faster.
D
Control button
E
PROGRAM AE +/– button
VOLUME +/– button
VOLUME +/– button
F
PROGRAM AE button (42)
G
DISPLAY button
H
LCD screen
I
Hook for lens cap/strap
J
Zoom button
K
Access lamp (15)
L
Battery/“Memory Stick” cover
M
Battery eject lever (8)
N
OPEN switch
O
POWER switch
P
DC IN jack (9) (12)
Q
POWER lamp/BATT CHARGE
lamp (9) (13)
lamp (9) (13)
2
1
3
4
5
6
9
0
qa
qh
qj
7
qs
qd
qf
qg
8
Attaching the strap
8
Preparing the power supply
Installing the battery pack
Your camera operates only with the “InfoLITHIUM” NP-FM50 battery pack* (M
series). You cannot use any other battery pack.
series). You cannot use any other battery pack.
To remove the battery pack
Open the battery/“Memory Stick” cover. Slide the battery eject lever
downward, and remove the battery pack.
downward, and remove the battery pack.
Be careful not to drop the battery pack when removing it.
*
What is “InfoLITHIUM”?
“InfoLITHIUM” is a lithium ion battery pack which can exchange information such as battery
consumption with compatible video equipment. This unit is compatible with the
“InfoLITHIUM” battery pack (M series). “InfoLITHIUM” M series battery packs have the
consumption with compatible video equipment. This unit is compatible with the
“InfoLITHIUM” battery pack (M series). “InfoLITHIUM” M series battery packs have the
mark. “InfoLITHIUM” is a trademark of Sony Corporation.
1
Open the battery/“Memory Stick” cover.
Open the cover while sliding the OPEN switch in the direction of the arrow.
2
Install the battery pack.
Insert the battery pack with the B mark facing tow ard the battery compartment
as illustrated.
as illustrated.
3
Close the battery/“Memory Stick” cover.
Battery eject lever
Getting star
ted
9
Charging the battery pack
You cannot charge the battery pack while your camera is turned on. Be sure to turn
off your camera before charging.
off your camera before charging.
Battery remaining indicator
The LCD screen on the camera shows the remaining time for which you can still
record or play back images.
This indication may not be entirely accurate depending on the conditions of use and
the operating environment.
record or play back images.
This indication may not be entirely accurate depending on the conditions of use and
the operating environment.
Auto power-off function
If you do not operate the camera for about three minutes during recording, the
camera turns off automatically to prevent wearing down the battery. To use the
camera again, slide down the POWER switch to turn on the camera again.
camera turns off automatically to prevent wearing down the battery. To use the
camera again, slide down the POWER switch to turn on the camera again.
1
Insert the battery pack into your camera.
2
Open the DC IN jack cover and connect the DC connecting cable to
the DC IN jack of your camera with the
the DC IN jack of your camera with the
v
mark facing up.
3
Connect the power cord (mains lead) to the AC power adaptor and
then to a wall outlet (mains).
then to a wall outlet (mains).
The BATT CHARGE lamp lights orange when charging begins. When the
BATT CHARGE lamp goes off,
BATT CHARGE lamp goes off,
normal charge
is completed. For
full
charge
, which allows you to use the battery longer than usual, leave the
battery pack inserted for about one hour after normal charge is completed.
AC-L10
AC power adaptor
DC IN jack cover
To the wall outlet (mains)
Battery pack (M series)
Power cord
(mains lead)
BATT CHARGE lamp
10
Approximate time to charge a completely discharged battery pack using the A
C-L10
AC power adaptor.
STILL mode recording*
DSC-S50
DSC-S50
DSC-S30
STILL mode playback** (DSC-S50/S30)
Approximate battery life and number of images that can be recorded/played back
with a fully charged battery pack at a temperature of 77˚F (25˚C), 640
with a fully charged battery pack at a temperature of 77˚F (25˚C), 640
×
480 image
size and in NORMAL recording mode. Numbers in parentheses indicate the time
when you use a normally charged battery pack.
when you use a normally charged battery pack.
∗
Recording at about 5-second intervals
∗∗
Playing back single images in order at about 3-second intervals
MOVIE mode recording (DSC-S50 only)
Approximate time that can be recorded with a fully charged battery pack at a
temperature of 77˚F (25˚C) and 160
temperature of 77˚F (25˚C) and 160
×
112 image size. Numbers in parentheses
indicate the time when you use a normally charged battery pack.
Charging time
Battery pack
Full charge (min.)
Normal charge (min.)
NP-FM50 (supplied)
150
90
Battery life and number of images that can be recorded/played back
LCD BACKLIGHT
Battery life (min.)
Number of images
BRIGHT
140 (130)
2300 (2100)
NORMAL
150 (140)
2500 (2300)
LCD BACKLIGHT
Battery life (min.)
Number of images
BRIGHT
140 (130)
2800 (2600)
NORMAL
150 (140)
3000 (2800)
LCD BACKLIGHT
Battery life (min.)
Number of images
BRIGHT
170 (160)
3400 (3200)
NORMAL
220 (210)
4400 (4200)
LCD BACKLIGHT
Battery life (min.)
BRIGHT
140 (130)
NORMAL
150 (140)
Click on the first or last page to see other DSC-S30 / DSC-S50 (serv.man3) service manuals if exist.