Sony DSC-S1900 / DSC-S2000 / DSC-S2100 Service Manual ▷ View online
DSC-S1900/S2000/S2100
Sony Corporation
SERVICE MANUAL
Revision History
SERVICE NOTE (Check the following note before the service.)
Ver.
Date
History
Contents
S.M. Rev.
issued
985275013.pdf
2010D29-1
© 2010.4
Published by Sony Techno Create Corporation
Ver. 1.2 2010.04
DIGITAL STILL CAMERA
The components identified
by mark 0 or dotted line with
mark 0 are critical for safety.
Replace only with part number
specified.
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Chinese Model
Korea Model
Brazilian Model
1-1. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
1-2. REGARDING FUSE
—
• Addition of SPECIFICATIONS.
S.M. Revised:
Page 2
• Addition of Model information table.
S.M. Revised:
Page 3
• Addition and correction of REPAIR PARTS LIST.
S.M. Revised:
Page 2-1, 2-3, 2-4, 2-5
• Addition of Accessories and ASSEMBLY.
S.M. Revised:
Page 3-1
• Addition of REPAIR PARTS LIST.
S.M. Revised:
Page 2-1, 2-3, 2-5, 3-1
Official Release
Revised-1
Revised-1
(A1 09-475)
Revised-2
(A2 10-017)
2010.01
2010.03
2010.03
2010.04
1.0
1.1
1.1
1.2
9-852-750-13
DSC-
S1900
/S2000/S2100
—
Yes
Yes
Photo: DSC-S2000/Silver
Internal memory
ON BOARD
Internal memory
ON BOARD
Revised-2
Replacement of the
previously issued
SERVICE MANUAL
9-852-750-12 with
this manual.
DSC-S1900/S2000/S2100
– 2 –
SPECIFICATIONS
[Input and Output connectors]
USB communication: Hi-Speed USB
USB communication: Hi-Speed USB
(USB 2.0 compliant)
[LCD screen]
LCD panel:
LCD panel:
DSC-S2100: 7.5 cm (3.0 type)
DSC-S1900
/S2000: 6.2 cm (2.5 type)
TFT drive
Total number of dots: 230 400 (960 × 240) dots
[Power, general]
Power: LR6 (size AA) Alkaline batteries (2), 3 V
Power: LR6 (size AA) Alkaline batteries (2), 3 V
HR15/51:HR6 (size AA) Nickel-Metal
Hydride batteries (2) (sold separately), 2.4 V
ZR6 (size AA) Oxy Nickel Primary Battery (2)
(sold separately), 3 V
Power consumption (during shooting): 1.0 W
Operating temperature: 0°C to 40°C
(32°F to 104°F)
Storage temperature: – 20°C to + 60°C
(– 4°F to + 140°F)
Dimensions:
97.6 × 61.0 × 27.2 mm
(3 7/8 × 2 1/2 × 1 1/8 inches)
(W/H/D, excluding protrusions)
Mass:
DSC-S2100: Approx. 184 g (6.5 oz)
DSC-S1900
/S2000: Approx. 173 g (6.1 oz)
(including two batteries and memory card)
Microphone: Monaural
Buzzer
Exif Print: Compatible
PRINT Image Matching III: Compatible
PictBridge: Compatible
Design and specifications are subject to
Design and specifications are subject to
change without notice.
Image device:
DSC-S2100: 7.79 mm (1/2.3 type)
R, G, B primary color mosaic filters
DSC-S1900
/S2000: 7.70 mm (1/2.3 type)
R, G, B primary color mosaic filters
Total pixel number of camera:
DSC-S2100: Approx. 12.4 Megapixels
DSC-S1900
/S2000: Approx. 10.3 Megapixels
Effective pixel number of camera:
DSC-S2100: Approx. 12.1 Megapixels
DSC-S1900
/S2000: Approx. 10.1 Megapixels
Lens: 3× zoom lens
f = 6.2 mm – 18.6 mm (35 mm – 105 mm
(35 mm film equivalent))
F3.1 (W) – F5.6 (T)
Exposure control: Automatic exposure,
Scene Selection (8 modes)
White balance: Automatic, Daylight, Cloudy,
Fluorescent 1/2/3, Incandescent, Flash
Recording interval for Burst mode:
Approx. 1 second
File format:
Still images: JPEG (DCF Ver. 2.0,
Exif Ver. 2.21, MPF Baseline)
compliant, DPOF compatible
Movies: AVI (Motion JPEG)
Recording media: Internal Memory (approx. 6 MB),
“Memory Stick Duo” media, SD memory card,
SDHC memory card
Flash: Flash range (ISO sensitivity
(Recommended exposure Index) set to Auto):
set to Auto):
Approx. 0.5 m to 3.3 m
(1 feet 7 3/4 inches to 10 feet 10 inches)
(W) /
approx. 0.5 m to 1.8 m
(1 feet 7 3/4 inches to 5 feet 10 7/8 inches)
(T)
[System]
The changed portions from
Ver.1.0 are shown in blue.
Ver.1.1 2010.03
DSC-S1900/S2000/S2100
– 3 –
Model information table
• Abbreviation
AUS : Australian model
BR : Brazilian model
CH : Chinese model
CND : Canadian model
KR : Korea model
Model
DSC-S1900
DSC-S2000
DSC-S2100
Destination
AEP, E, AUS, BR
US, CND, AEP, UK, E,
AUS, KR, BR
US, CND, AEP, UK, E,
AUS, CH, KR, BR
The changed portions from
Ver.1.0 are shown in blue.
Ver.1.1 2010.03
DSC-S1900/S2000/S2100
– 4 –
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST
ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPO-
NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY
SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM-
PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT
LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES
SUPPLÉMENTS PUBLIÉS PAR SONY.
Unleaded solder
Boards requiring use of unleaded solder are printed with the leadfree
mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with the
lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40°C higher than ordi-
nary solder.
Ordinary soldering irons can be used but the iron tip has to be applied
to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to about
350°C.
Caution: The printed pattern (copper foil) may peel away if the heated
tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such as
on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may also be
added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
1. Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes and
bridges.
2. Check the interboard wiring to ensure that no wires are “pinched”
or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly transistors,
that were installed during a previous repair. Point them out to the
customer and recommend their replacement.
4. Look for parts which, through functioning, show obvious signs of
deterioration. Point them out to the customer and recommend their
replacement.
5. Check the B+ voltage to see it is at the values specified.
6. Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270°C during
repairing.
• Do not touch the soldering iron on the same conductor of the circuit
board (within 3 times).
• Be careful not to apply force on the conductor when soldering or
unsoldering.
