Sony DSC-RX10M2 (serv.man2) Service Manual ▷ View online
2-3.
Notes on Replacing the Lens
When replacing the lens, read the QR code given on the data sheet of the replacement lens for service.
Start the Adjust Manual and read the QR code using a QR code reader.
The read data is used for adjustment after replacement.
Select “Lens data carry” on the ADJUST tab of the Adjust Manual, and click the LOAD button to load the file.
Start the Adjust Manual and read the QR code using a QR code reader.
The read data is used for adjustment after replacement.
Select “Lens data carry” on the ADJUST tab of the Adjust Manual, and click the LOAD button to load the file.
QR code
DSC-RX10M2
2-5
2-4.
Notes on Removing/Installing the Imager Board (CD-1006B Flexible
Board)
Board)
When the CD-1006B Flexible Board (Imager) is mounted to the lens, shift and tilt adjustment is made with Spacer Plates.
When removing the CD-1006B Flexible Board, pay attention to the following.
1.
When removing the CD-1006B Flexible Board, pay attention to the following.
1.
When the lens is not replaced
Example: In the case of disassembly, cleaning, or replacement of the CD-1006B Flexible Board (Imager).
Example: In the case of disassembly, cleaning, or replacement of the CD-1006B Flexible Board (Imager).
• Check and record the size of the built-in three Spacer Plates and store them so as not to lose them.
• When assembling the CD-1006B Flexible Board, be sure to install the Spacer Plates to their original locations.
• When assembling the CD-1006B Flexible Board, be sure to install the Spacer Plates to their original locations.
Size
0.xx
Note
Be careful not to lose the Spacer Plates.
If any Spacer Plate is lost or their previous positions are not sure, repeatedly take a photo and check that there is
no local defocus. Selecting appropriate Spacer Plates is needed.
If any Spacer Plate is lost or their previous positions are not sure, repeatedly take a photo and check that there is
no local defocus. Selecting appropriate Spacer Plates is needed.
2.
When the lens is replaced
• Prepare three Spacer Plates C (t = 0.30) (Sony Part No.: 4-437-388-01) and install them to the new lens.
0.30
DSC-RX10M2
2-6
2-5.
Checking the Wi-Fi Function
After this unit has been disassembled and reassembled, check the Wi-Fi function.
Required equipment:
Windows PC or smartphone with Wi-Fi interface
Procedure:
1.
Turn on the power of the unit and enable the Wi-Fi function.
(Upon completion of the preparation for Wi-Fi connection, the password for Wi-Fi connection is displayed.)
(Upon completion of the preparation for Wi-Fi connection, the password for Wi-Fi connection is displayed.)
2.
Confirm on the PC or the smartphone that the unit is detected as a connectable wireless network.
DSC-RX10M2
2-7
Click on the first or last page to see other DSC-RX10M2 (serv.man2) service manuals if exist.