DOWNLOAD Sony DSC-RX10 (serv.man2) Service Manual ↓ Size: 9.74 MB | Pages: 28 in PDF or view online for FREE

DSC-RX10_L2

1-8

Removal
1.  Apply alcohol to the gap of the Ornamental Plate using tweezers or fine-tipped stick as shown below.
2.  Remove the Ornamental Plate upward.

 

Ornamental Plate

Solvent

Tweezers

Installation
1.  Stick 1 Group Ornamental Plate tape at three locations shown below.
2.  Install the Ornamental Plate matching the cutout with the projection on the Filter Frame.

 

1 Group Ornamental Plate Tapes

1 Group Ornamental Plate Tape

Ornamental Plate

Filter Frame

Projection

Cutout

Removal
1.  Remove the three screws to detach the Zoom Gear Assy.

 

Zoom Gear Assy

2.  Fully turn the gear of the Cam Tube counterclockwise.
3.  Remove the 1 Group Lens Frame Block Assy and the 2 Group Lens Frame Block Assy.

 

Gear of the Cam Tube

1 Group Lens 
Frame Block Assy

2 Group Lens 
Frame Block Assy

DSC-RX10_L2

1-9

9.  Fully turn the Cam Tube clockwise and pull out the Flexible Board.

 

Cam tube

Rib

Rib

Flexible Board

10. Pull out the 3 Group Lens Frame Block Assy.
11.  Turn the Iris 3-4 Group Lens Frame Block Assy counterclockwise about 10 degrees and remove it upward.

 

10

approx.

Iris 3-4 Group Lens 
Frame Block Assy

Iris 3-4 Group Lens 
Frame Block Assy

4.  Fully turn the Cam Tube clockwise and temporarily install the Zoom Gear Assy.

 

Cam tube

Zoom Gear Assy

5.  Remove the FG Retainer.
6.  Remove the Zoom Gear Assy.

 

Hooks

FG Retainer

Rib

Rib

Rib

Zoom Gear Assy

7.  Remove the four screws and pull the Flexible Board out of the hole of the Rear Tube Mirror Block Assy.
8.  Remove the Rear Tube Mirror Block Assy and the Thrust Plate.

 

Rear Tube Mirror 
Block Assy

Flexible Board

Thrust Plate

Hole

Hook

DSC-RX10_L2

1-10

12.  Detach the Straight Tube Block Assy from the Cam Tube.

 

Cam Tube

Straight Tube Block Assy

13.  Remove the screw and release the two claws to detach the Iris Unit from the 3-4 Group Lens Frame Block Assy.

 

Claw

Claw

3-4 Group Lens 
Frame Block Assy

Iris Unit

Installation
1.  Install the Iris Unit to the 3-4 Group Lens Frame Block Assy by locking the two claws and tightening a screw.

 

Claw

Claw

3-4 Group Lens 
Frame Block Assy

Iris Unit

2.  Install the Straight Tube Block Assy to the Cam Tube and set the △ mark on the Straight Tube Block Assy at the position shown below.

 

Cam Tube

Straight Tube 
Block Assy

DSC-RX10_L2

1-11E

3.  Gently fold the Flexible Board and insert the 3 Group Lens Frame Block Assy into the Straight Tube Block Assy.
4.  Turn the Iris 3-4 Group Lens Frame Block Assy clockwise about 10 degrees to further insert it.

 

10

approx.

Iris 3-4 Group Lens 
Frame Block Assy

Flexible Board

5.  Confirm that the Flexible Board is placed in the concave of the Cam Tube.
6. Match 

the 

△ mark on the Straight Tube Block Assy with the fin of Cam Tube.

 

Concave of Cam Tube

mark

Fin of Straight 
Tube Block Assy

Rib

Rib

7.  Install the Thrust Plate.
8.  Pull the Flexible Board out of the hole of the Rear Tube Mirror Block Assy and install the Rear Tube Mirror Block Assy with four screws.

 

Thrust Plate

Flexible Board

Hook

Rear Tube Mirror 
Block Assy

9.  Fully turn the Cam tube counterclockwise.
10. Install the 2 Group Lens Frame Block Assy.
11.  Install the 1 Group Lens Frame Block Assy and fully turn the gear of the Cam Tube clockwise.

 

2 Group Lens 
Frame Block Assy

Cam Tube

1 Group Lens 
Frame Block Assy

Gear of the Cam Tube

12. Install the Zoom Gear Assy with three screws.
13. Install the FG Retainer.

 

Zoom Gear Assy

FG Retainer

Hooks

Rib

Rib

Rib

14. Perform the Flange Back Adjustment after the assembling.